• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.3
• /
• pp.41-48
• /
• 2008

One of main functions of the firing control system applied to a rocket propulsion test has been to provide electric current for ignition of a solid rocket motor. This paper describes the design and implementation of an enhanced firing control system for ground propulsion test that can also control and verify various types of squib events and flight sequences.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.364-369
• /
• 2012

The vehicle sound classified into driving sound due to power-train, operating sound due to electric motor like sunroof, door lock and electronic sound. These vehicle sound has various features depend on the characteristic of sound that user required. And it based on cultural and regional difference of user. In this study, the user required vehicle sound characteristics for luxury sedan was investigated in overall viewpoint. And virtual target sound was developed through the result of user preference investigation. Next, Jury test was carried out in Germany, USA and Korea for evaluating the target sound. And the regional and individual difference of preference was analyzed through the result of jury test. This result of research will be contributed to design of vehicle sound quality and target sound setting.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.63-66
• /
• 2001

원자력발전소는 지진과 같은 자연재해나 극한 운전조건에서 방사능물질이 외부로 누출되는 것을 방지하도록 설계 되어야한다. 따라서 이와 관련된 안전등급기기는 원전설비의 정상운전조건뿐 아니라 원전설계기준 사고조건(DBE, Design Basis Events)에서도 그 안전성 관련 기능이 검증되어야 한다. 본 연구에서는 국내 원자력 발전소의 다양한 환경조건을 만족하며 엄격한 기기검증요건에 따라 당사가 수행한 안전등급(Class 1E) 저압 유도전동기의 개발사례를 중심으로 방사능노출시험, 가속열노화해석 및 시험, 내진해석 및 시험으로 구성되는 기기검증의 절차와 방법을 제시하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.5
• /
• pp.397-403
• /
• 2017

This paper studies the voltage angle control of interior permanent magnet synchronous motors (IPMSMs). For voltage angle control, the optimum voltage angle trajectory according to the operating speed is researched while the voltage and current limit conditions are considered. Through research, two different optimum voltage angle trajectories that depend on the design of IPMSMs were found. The IPMSM drive based on a voltage angle control that follows such trajectory is proposed. Unlike the conventional voltage angle control method, which is applied only in the flux-weakening region, the proposed voltage angle control can be implemented in all operation ranges from low to high speed. The proposed method is verified by experiments using a DSC controller for 800 W IPMSM.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.165-170
• /
• 2003

Centrifugal blowers are widely used for air handling units in industry applications. The blower has a centrifugal impeller and a scroll casing including a driving component such as an electric motor. The impeller takes forward or backward blades to induce flows into the blower. Comprehensive investigation according to the two kinds of blades is systematically carried out for a guidance of design. It is observed that flow rate of the blower with forward blades is larger than that of the system with backward blades. The reason is due to larger velocity from the rotating forward blades and the tendency is validated by a parallel experiment with a wind tunnel. Numerical analysis for the system shows detail information inside the blades and the casing. A series of figures to show the flow details offers deep understanding of a centrifugal blower with different blades.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.881-883
• /
• 2004

The high efficiency for motors has been continuously required for energy saving. The iron losses occurring in motor cores account for high percentage in the energy losses of motors, so that electrical steels with lower iron losses have been desired as core materials. It is necessary to understand the basic charecteristic of the electrical steel to design motors and establish manufacturing process for the loss reduction. Therefore, this paper deal with the basic characteristic related with the magnetic properties of electrical steels and descibes the cause of core loss in electrical machines.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.438-441
• /
• 2004

In this paper, an apparatus for unbinding the rope is studied to solve continuous work of the auto cleaning apparatus of a pillar. During operation of the auto cleaning apparatus of a pillar, in order to not swing the apparatus is down by it's weight according as electric motor velocity. We focus on the design and the implementation to upgrade the auto cleaning apparatus of a pillar that had been implemented.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.1
• /
• pp.25-32
• /
• 2000

A combination steering system was designed to provide the flexibility in controlling the steering wheel in fishing operations of the inshore and coastal fishing vessels. The designed steering system basically is consisted of three driving units, such as a electrically driven hydraulic pump unit with a solenoid control valve, a DC motor driven hydraulic pump unit and a manually driven hydraulic pump unit, and two controllers to provide remote steering on the deck, respectively. The steering torque was measured and analyzed to investigate the dynamic performance of the developed steering system. The steering system showed excellent linearity between the working pressure of cylinder and the torque of rudder post in case of increasing in rudder angle from $5^{\circ} to 35^{\circ}$ that is, the steering torque increased from $10.4 kgf{\cdot}m$ to $105.3 kgf{\cdot}m$ and then the working pressure of cylinder fluctuated from 6.3 kgf/cm super(2) to 16.4 kgf/cm super(2). The steering time of 3.2 sec in remote hydraulic steering by the on/off solenoid valve control was much faster than 13.2 sec in the manual steering by the helmsman and 11.6 sec in the electric steering by a DC motor, and then it was verified that operation of one unit does not affect other units in combination steering system in any way. Furthermore, the developed steering system can be remotely controlled in multiple stations of the deck during the fishing operation and the automatic pilot steering unit can be used to add hydraulic steering.

• Journal of the Korean Institute of Gas
• /
• v.26 no.2
• /
• pp.21-26
• /
• 2022

Since the four-wheel drive transmits the driving force to all four wheels, the traction with the road surface increases, thereby increasing the driving force. However, it has the disadvantage of lowering fuel efficiency. Therefore, four-wheel drive is commonly used as a method of converting to optional four-wheel drive when necessary while driving in two-wheel drive. This selective four-wheel drive converts the driving force by mechanically changing the electric signal sent by the driver in the transfer case. In this study, in order to mechanically change the electrical signal, a reducer is applied to the motor to increase the torque to perform the function. Therefore, in this study, a reduction mechanism applicable to the motor inside the transfer case applied to convert the drive is derived, and the reduction ratio applying the planetary gear type is optimized accordingly. And based on the derived reduction ratio, two sets of planetary gears using a ring gear in common were applied to develop a planetary gear tooth type in which the input shaft and output shaft are decelerated in the same phase. Optimization design was carried out.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.9
• /
• pp.691-701
• /
• 2020

An actuator mixer design using convex optimization technique situation where the propulsion system of an electric VTOL UAV during vertical take-off and landing maneuvers is proposed. The attainable control set to analyze the impact from failure of each motor and propeller can be calculated and illustrated using the properties of the convex function. The control allocation can be defined as a convex function optimization problem to obtain an optimal solution in real time. The mixer is implemented using a convex optimization solver, and the performance of the control allocation methods is compared to the attainable control set. Finally, the proposed mixer is compared with other techniques with nonlinear sux degree-of-freedom simulation.