• 제목/요약/키워드: electric fire

검색결과 582건 처리시간 0.031초

옥내배선, 콘센트 및 플러그 개선을 통한 전기화재 예방대책 (Electrical and Fire Prevention Measures through Improvement of Indoor Wiring, Outlets and Plugs)

  • 정성효;안희석;이용수;김창은
    • 한국건설안전학회 논문집
    • /
    • 제1권1호
    • /
    • pp.31-39
    • /
    • 2018
  • 국내에서 발생하는 화재사고 중 약 20%가 전기설비에서 기인한 화재로 확인되고 있다. 복잡하고 대형화되어있는 건축물에서 전기화재는 재산 피해와 인명 피해가 증가하면서 대형화하는 양상으로 발생하고 있다. 여러 가지 전기화재의 원인 중 누전에 의한 발화가 약 71.5%를 차지하고 있고, 전기설비별 분류에서는 배선 및 배선기구에서 발생하는 화재가 약 38.3%를 차지하고 있다. 본 연구의 목적은 현재 사용되고 있는 옥내배선 형태를 개선하여 누전으로 인한 전기화재를 예방하는 방법을 제시하고, 배선기구에서 범용 되고 있는 콘센트와 플러그를 개선하여 배선기구에서 발생하는 화재를 예방하는 근원적 방안을 찾고자 한다. 본 연구를 통해서 제시되는 전기화재 예방대책은 전기화재의 근원적 원인을 제거하여 많은 인명과 재산을 보호하는 대책으로 활용될 수 있을 것으로 기대된다.

낙뢰로 인한 전기화재의 현장조사기법 연구 (A Study on Investigation Method of the Electric Fire Scene Caused by Lightning)

  • 송재용;사승훈;남정우;김진표;박남규
    • 한국화재소방학회논문지
    • /
    • 제25권1호
    • /
    • pp.50-56
    • /
    • 2011
  • 최근 지구온난화에 의한 영향으로 낙뢰의 발생빈도가 증가하는 추세이고, 낙뢰에 수반되는 뇌격전류의 강도 또한 강해지고 있는 추세이다. 2008년 기준 국내의 낙뢰 발생 빈도는 56만여 건 정도가 발생하였으며, 낙뢰로 인한 인명피해 사고 및 건축구조물의 피해는 나날이 증가하고 있다. 특히, 낙뢰로 인한 전기화재는 낙뢰 발생에 따른 대지전위 상승으로 접지선과 전원선간 절연파괴 과정에서 발생되며, 현장조사 결과, 낙뢰 발생 지역에 인접한 지역에서 동시다발적으로 전기적 피해가 발생하였다. 낙뢰에 대한 피해를 방지하기 위해서는 낙뢰 보호 장치의 설치 및 등전위 접지 시행 등의 방법이 요구된다. 또한 낙뢰로 인한 화재현장 조사에 있어서는 기상청에서 제공되는 낙뢰 발생 기록 및 화재현장과 인접한 지역에서 동시다발적인 전기적 특이점 형성 여부에 대한 검토가 필요하다.

The Fire Hazard of Screwed Electric Contacts Due to Mechanical Vibration at Low Voltage Equipment

  • Choi, Chung-Seog;Kim, Young-Seok;Kim, Hyang-Kon
    • International Journal of Safety
    • /
    • 제4권2호
    • /
    • pp.18-23
    • /
    • 2005
  • There are many electrical connections in the electric apparatus and most fires due to a fault contact result from a failure or misuse of electric apparatus and installation. The fault contact happens between electrical connections by the loose and the mechanical vibration. In this paper, we have investigated thermal and electrical properties of screwed electric contacts due to the mechanical vibration. The exciter was connected to a signal generator and power amplifier that provided the vibration frequency and amplitude. The vibration, temperature and voltage data were sent to a data acquisition system (DAQ). In the case that fault contact took place, the arc happened between the screwed electric contact and electric wire, heat due to the arc was transmitted to the adjacent insulators, for which the oxide could be generated more. In addition, a spark was generated and the insulator began to melt. Thus, the possibility of electrical fire became the highest in this case. Finally, when the fault contact takes place due to vibration, the hazard of an electric accident is very high.

지중송전케이블의 방화대책 (The fire Prevention measures of the underground transmission line)

  • 곽방명;탁의균;김재승
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 A
    • /
    • pp.501-503
    • /
    • 2001
  • Electric power consumption is highly increasing as the social trend requiring comfortable life, the population in a big city and the industrial development. Therefore it has become to be very important to supply the stable high-quality power. As these trend, the underground power transmission facility is highly increasing in the center of a city. As the proportion to increase facility in tunnel, the fire prevention measures of the underground transmission line become very important.

  • PDF

화재현장에서 분석 절차에 따른 전기화재 조사기법 개발 (A Study on the Unique point about the Tracking at Electrical fire spot)

  • 김동욱;이기연;길형준;김향곤;정영식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.2130-2131
    • /
    • 2011
  • Electric fire breaks out by various causes such as electric short, overload(over current), leakage current, poor contact, static electricity, insulation deterioration, partial disconnection and etc. In this paper, we studied analysis technique for scientific and systematic judgment for distinction of electricity fire existence and nonexistence, and described about electricity fire cause analysis process for collecting physical evidences. We handled external form analysis, Substance extension analysis, X-ray transmission analysis, cross-section analysis, thermal analysis, chemical structure analysis, surface structure analysis, component analysis, electrical properties analysis, and circuit analysis by analysis technique for electricity fire cause judgment. We expect that analysis technic elevation and correct cause of fire analysis of scene of a fire investigators and analysts through this paper which see help.

  • PDF

전기자동차 화재 대응을 위한 제도적 개선 방안 연구: 서울시 사례를 중심으로 (A Study of Institutional Improvements for Responding to Electric Vehicle Fires: Focusing on the Case of Seoul)

  • 박남권;함승희
    • 한국재난정보학회 논문집
    • /
    • 제20권1호
    • /
    • pp.32-39
    • /
    • 2024
  • 연구목적과 방법: 전기차 화재에 대한 대응력을 향상시키기 위해 제도적 개선방안을 제시하고자 한다. 이를 위해 서울시를 중심으로 전기차 보급 및 화재 발생 현황, 관련 법 제도를 살펴보았다. 연구결과: 전기차 관련 상위법령 및 조례는 보급정책만 중심적으로 규정되어 있어 전기차 화재에 대해 실질적인 화재 대응 방안이 없는 상황이다. 각 자치단체별로 동일한 규정을 적용하기 위해서는 상위법령에서 소방 및 안전 시설에 대한 기준 정립과 제도 확립이 필요하다. 결론: 전기차 화재 특성을 고려한 소방 및 안전시설 설치 기준을 정하고 관련 제도의 개선을 통해 전기자동차 화재에 대한 시민들의 우려를 잠식시키는 것이 궁극적으로 전기차 보급률을 향상시키는 효과로 이어질 것이다.

가로등설비 누전시 건조상태와 침수상태에 대한 전위분포 분석 (The Analysis on the Electric Potential Distribution of Dry and Submerged Condition by Electric Leakage in Street Lamp)

  • 홍성호;박상태;김상철
    • 한국안전학회지
    • /
    • 제23권6호
    • /
    • pp.44-50
    • /
    • 2008
  • This paper presents study on the electric potential distribution when have a short in street lamp. In order to measure electric potential testing ground is built in. A experiment is conducted to simulate dry and submerged situation of street lamp. The street lamp is leaked by artificial means. And electric potential is measured in grounded street lamp and street lamp alone. The results show that touch voltage of grounded street lamp is possible more high than street lamp alone. And the electric shock hazard is high because high electric potential is distributed near submerged street lamp. Also if street lamp is submerged ground is not useful to decrease electric shock hazard.

제조 사업장의 환풍기 화재위험성 조사 (The Survey of Fire Hazard of Fan in Manufacturing Industries)

  • 김성삼
    • 조명전기설비학회논문지
    • /
    • 제27권10호
    • /
    • pp.21-29
    • /
    • 2013
  • The short circuit and overload is presented by main cause of electrical fire. However, 85% of the fan directly connected the outlet box without switch in total 110 fans as a research in manufacturing industries. In installation direction of vertical type fans which was placed on the horizontal surface, only 39 vertical type fans were placed on vertical surface and 71 fans were placed on the horizontal type. The installation direction of the fans warns of the risk of the fire hazard due to the motor stall to the user manual of the maker. However, it is the representative nonconformity example of construction which the people or builder disregards. In addition, the condition of ground connection with the earth leakage prevention was investigated in grounding of 5 fans, non-grounding of 105 fans. The double insulation structure is generally used for small fan and it can't connect ground wire as electric plug of non-grounding type. However, industrial iron fan needs ground wire for electric leakage and to protect against electric shock.