• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.792-794
• /
• 2002

Uniform cylinder-shaped precursors for (Y,Gd)$BO_3$:Eu phosphors were prepared by urea hydrolysis reaction. After heating the precursors at lower temperature than general synthetic methods, the phosphor powders were well dispersed and held their original shapes. Their emissions under vacuum-ultraviolet (VUV) excitation appeared with the peaks at 593nm due to magnetic dipole transition from $^5D_0$ to $^7F_1$, 612nm and 627nm due to electric dipole transition from $^5D_0$ to $^7F_2$

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.257-259
• /
• 2002

As a new host material for a red phosphor for PDP applications, has studied (Y,Gd)$Al_3(BO_3)_4$ which gives non-centrosymmetric sites for $Eu^{3+}$ activators. Vacuum ultraviolet (VUV) excitation spectrum of new red phosphor (Y,Gd)$Al_3(BO_3)_4$:$Eu^{3+}$ has two broad bands. One band with the absorption edge at ca. 168 nm is the band-gap absorption of aluminoborate and the other broad band centered 240 nm is the charge transfer transition between $Eu^{3+}$ and the neighboring oxygen anions. The PL spectrum shows the strongest emission at 617 nm due to the electric dipole $^5D_0{\rightarrow}^7F_2$ transition of $Eu^{3+}$, whose luminescent chromaticity is (0.67, 0.33).

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권12호
• /
• pp.617-622
• /
• 2006

It is necessary to measure precisely the magnetic characteristics of electrical steel sheets under rotating magnetic fields, to obtain an accurate numerical performance analysis of electric machines made of electrical steel sheets. In this paper, the two dimensional magnetic characteristics of an electrical steel sheet are measured and explained under rotating magnetic fields using a two-axes-excitation type single sheet tester (SST). Through experiments, the magnetic properties, under rotating magnetic fields, of a non-oriented and grain oriented electrical steel sheet were measured respectively. In addition, the iron losses due to not only the alternating magnetic fields, but also rotating magnetic fields were measured. These experimentally measured results can evidently be applied to the analysis of iron losses in electrical machines.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.555-558
• /
• 2013

A type of electric propulsion employed by specialized purpose vessels or offshore is the azimuth thruster. Azimuth thruster application had been increasing recently and resulted to excellent vessel maneuverability. However, this system is very complex and some of its major component being exposed under the seawater level presents difficulty in sealing design. For Polar class icebreaker operating in extreme sea condition, this requires a high level of reliability and safety. In this study, the characteristics of lubricating orifice pipe structural vibration installed at the lower reduction gear were investigated and analyzed through beam analysis theory and comparison of experiments. Propeller excitation and the resonant modes of vibration causing excessive vibration and suitable countermeasures to prevent damage due to vibration fatigue on the pipe are presented.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.619-624
• /
• 2015

Owing to miniaturization and low-power electronics, mobile, implanted, and wearable devices have become the main trends of electronics during the past decade. There has been much research regarding energy harvesting to achieve battery-free or self-powered devices. The optimal design problems of a double-pendulum kinetic-energy harvester from human motion are studied in this paper. For the given form factor, the weight of the harvester, and the known human excitation, the optimal design problem is solved using a dynamic non-linear double-pendulum model and an electric generator. The average electrical power was selected as the performance index for the given time period. A double-pendulum harvester was proven to be more efficient than a single-pendulum harvester when the appropriate parameters were used.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3681-3685
• /
• 2012

We developed a simple and effective method for the SERS-based detection of protein-small molecule complexes and label-free proteins using avidin-induced silver aggregation. Upon excitation with light of the appropriate wavelength (633 and 532 nm), the aggregated silver nanoparticles generate a strong electric field that couples with the resonance of the molecules (atto610 and cytochrome c), increasing the characteristic signals of these molecules and resulting in sensitive detection. The detection limit of biotin with the proposed method is as low as 48 ng/mL. The most important aspect of this method is the induction of silver aggregation by a protein (avidin), which makes the silver more biocompatible. This technique is very useful for the detection of protein-small molecule complexes.

• Journal of Power Electronics
• /
• 제1권2호
• /
• pp.127-132
• /
• 2001

This paper describes two different systems which can compensate harmonic currents generated in a power system. As non-linear loads increase gradually in industry fields, harmonic current generated in the electric power network system also increases. Harmonic current makes a power network current distorted and generates heat, vibration and noise in the power machinery. Many approaches have been applied to compensate harmonic currents generated in the power system. Among various approaches, in this paper, two kinds are compared and evaluated. They are flywheel compensators bases on secondary excitation of WRIM(wounded rotor induction motor) and SCIM(squirrel cage induction motor). Both systems have a common structure. They use a flywheel as an energy storage device and use PWM inverters. The main differences are the size and rating of the converter used.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.147-150
• /
• 1998

Since P-ELD(powders type electroluminescent device) phenomena were found by G.Destriau at first In 1936, lots of studying was performed in order to realize surface emission devices and flat panel display as a backlight. Due to the problem of low luminance and color and so on, it was delayed. Recently using electric field and thermal effect which can change it\`s molecular arrangement, it can be developed using photoelectric properties of P-ELD. P-ELD in this study was prepared by casting method. Basic structure is ITO/Phosphor/insulator/Al sheet, each layer was mixed by binder, which concentration 11p(poise) for phosphor, 8p(poise) fort insulator. Dielectric properties was investigated first and emission properties of P-ELD based on ZnS:Mn,Cu/ZnS:Cu,Br mixture. P-ELD prepared in this work exhibits about 100cd/㎡ 1-kHz simusoidal excitation.

• Transactions on Electrical and Electronic Materials
• /
• 제17권1호
• /
• pp.41-45
• /
• 2016

The Cs₃Sb photocathode was formed by non-vacuum process technology and successive in-situ photocathode vacuum device fabrication carried out in a process chamber. Performance testing of the device was followed. Light emission from the devices was induced by photoemitted electrons, which were accelerated by an anode electric field that was shielded from the photoemitter surface. The luminescent characteristics of the devices were investigated by measuring the optical parameters as functions of the applied anode voltages. The results showed that this approach could produce a more easily directed and controlled stream of light. These features make these devices suitable for a variety of planar lighting applications.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.7-11
• /
• 2002

This paper proposes an APF(Active Power Filter) with WRIM(Wounded Rotor Induction Motor) controlled by sliding mode which can compensate harmonic currents generated in a power system. As non-linear loads increase gradually in industry fields, harmonic current generated In the electric power network system also increases. Harmonic current makes a power network current distorted and generates heat, vibration and noise In the power machinery, Many approaches have been applied to compensate harmonic currents generated in the power system. Among various control strategy, in this paper, a sliding mode controlled systems is designed and evaluated. This is a flywheel compensator based on secondary excitation of WRIM(wounded rotor induction motor) with SMC(sliding mode controller). The proposed system uses a flywheel as an energy storage device. The designed control scheme is verified through simulation.