• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.1115-1118
• /
• 2015

전기모터 구동 방식의 2륜 전기 차량은 공항, 항만 등에서 경계형 정숙 차량으로 좁은 실내를 이동하는데 많이 사용되고 있다. 이런 2륜형 전기 차량은 밧데리로 구동되며, 전/후진 및 회전 제어에 있어 여러 센서 및 핸들 조작 장치를 이용하는 제어 장치를 사용한다. 본 연구에 있어서는 탑승자가 별도의 손잡이형 회전제어 장치를 사용하지 않고도 두발의 무게 중심 만을 이용하여 회전하는 센서 인터페이싱 전자 제어 장치를 설계한다. 코너링 회전 시 탑승자의 안전성을 고려하는 설계라 할 수 있다.

• 한국해양학회지
• /
• 제15권2호
• /
• pp.108-111
• /
• 1980

The sampling was made by a kind of trap nets and an electric fishing apparatus in the lagoons of Arcachon Bay. Length frequency distributions obtained by two gears are combined to propose more reliable length composition of the population. The biomass was estimated by the capture and recapture method in a limited area with electric fishing apparatus, and it was redressed based on the corrected length composition. It showed approximately 638kg/ha in the deeper parts of the lagoons. It suggests that the lagoons of Arcachon Bay contain relatively high density of eels.

• 한국산학기술학회논문지
• /
• 제5권5호
• /
• pp.438-441
• /
• 2004

본 연구에서는 강관 파일 자동청소장치에 의 로프 풀림장치를 추가하여 연속적인 청소작업을 구현하는 방법에 대해 제안한다. 특히 본연구에서 제안된 로프 풀림 장치는 강관 파일 자동 청소장치가 청소를 하고 있는 동안 흔들림을 최소화 하도록 모터의 회전속도에 비례하여 자중에 의해 하강하도록 설계되었다. 따라서 본 연구에서는 이미 제작되어 실험을 거친 강관 파일 자동 청소장치의 부가기능을 추가하므로써 성능개선을 위한 개념설계 및 제작에 주안점을 두기로 한다.

• 한국화재소방학회논문지
• /
• 제20권1호
• /
• pp.71-76
• /
• 2006

전기화재의 주된 원인은 단락 및 과부하 사고, 누전 및 접촉불량 등으로 구분되며, 화재의 발생요인은 이들 사고에서 동반되는 아크나 스파크로 인한 화재가 대다수이다. 저압배전선로에 사용되는 고감도형 누전차단기는 누전과 과부하를 검출하여 차단하는 기능은 있으나, 전기화재의 직접적인 위험요소인 아크나 스파크 현상에 대한 차단기능은 없는 것으로 분석된다. 이것은 저압 분전반에 적용되는 누전차단기의 경우 정격차단시간이 30[ms](KS C 4613)로 정해져 있어, 더욱 낮은 레벨로 주기적으로 발생되는 아크나 스파크를 감지하지 못하기 때문이다. 이러한 문제점을 개선하기 위하여 본 논문에서는 전기화재에 기인되는 아크나 스파크에 대해 누전차단기를 트립시키는 보조제어장치를 제안하고, 제안된 보조제어장치의 이론적 해석과 실험측정을 통해 그 타당성을 입증시킨다.

• International Journal of Safety
• /
• 제4권2호
• /
• pp.18-23
• /
• 2005

There are many electrical connections in the electric apparatus and most fires due to a fault contact result from a failure or misuse of electric apparatus and installation. The fault contact happens between electrical connections by the loose and the mechanical vibration. In this paper, we have investigated thermal and electrical properties of screwed electric contacts due to the mechanical vibration. The exciter was connected to a signal generator and power amplifier that provided the vibration frequency and amplitude. The vibration, temperature and voltage data were sent to a data acquisition system (DAQ). In the case that fault contact took place, the arc happened between the screwed electric contact and electric wire, heat due to the arc was transmitted to the adjacent insulators, for which the oxide could be generated more. In addition, a spark was generated and the insulator began to melt. Thus, the possibility of electrical fire became the highest in this case. Finally, when the fault contact takes place due to vibration, the hazard of an electric accident is very high.

• 한국공작기계학회논문집
• /
• 제12권6호
• /
• pp.29-35
• /
• 2003

In this research 4 plate type ER-Valves which have same surface but different width and length are designed and an experimental apparatus is constructed. With this experimental apparatus, flow rate and pressure drop of ER fluid flowing in ER-valves are measured with varying electric field strength of ER-valve, and relation between valve types and pressure drop is also experimented. ER fluid is made silicon oil mixed with 40wt% starch having hydrous particles. If we allow the same electric field in the ER-Valve, we came to how that the pressure drop is effected by the electrode length and electrode width. When the strength of the electric field increased, the pressure drop happened big and the flow rate decreased.

• 전기저널
• /
• 3호통권111호
• /
• pp.40-44
• /
• 1986

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.193-195
• /
• 1996

In amorphous transformer core, magnetic field annealing is required for inducing uniaxial magnetic anisotropy to circular direction of the core. Generally annealing temperature is about foot, so insulator using in solenoid bed must have a high temperature stability, mechanical strength and good machinability. In this study, we made the magnetic field annealing apparatus using insulators, conductors, connectors and power supply. And then tested the apparatus in annealing process of 50 kVA amorphous transformers.

• 대한의료기공학회지
• /
• 제1권1호
• /
• pp.95-109
• /
• 1996

To investigate anti-stress effects of Manual Kigong, Manual-Apparatus Combined Kikong, and Systemic Kigong, this experiments were performed changing of plasma catecholaminess and serum cortisol measured. Also using D.I.T.I(Digital Infrared Thermongraphy Imaging), Pulse Analyzer, Electric Current on Neurometer, and Digital Flicker on Testing-Stressed. And following results were abtained. 1) Menual-Appartus Combined Kikong decreased significantly increasing concentration of plasma epinephrine and norepinephrine level in Testing-stressed. 2) Manual Kigong decreased increasing concentration of serum cortisol level in Testing-stressed. 3) Manual Kigong and Manual-Aparatues Combined Kikong increased decreasing thermomerty on the palm's center caused Testing-stressed. 4) All of three treats are small change in SET(Systolic Ejection Time) by Pulse Analyzer caused Testing-stressed. 5) More changes of Electric Current on the Neurometer Diagnosis caused Testing-stressed are as followed. Manual-Apparatus Combined Kikong >Systemic Kigong >Manual Kigong From the results, it may be concluded that Manual-Apparatus Combined Kikong Theraphy having more anti-stress effects than Manual Theraphy. Systemic Kigong Therapy.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.617-618
• /
• 2012

Recently as the inactive response characteristics of the existing RCD(Residual Current protective Device) used on low voltage power distribution system, so control of overload and electric short circuit faults, major causes of electrical fires, are not enough. Therefore, this paper is proposed a prevention apparatus using neutral line voltage and semiconductor switching devices for the prevention of electrical disasters in low voltage power distribution system caused by overload or electric short circuit faults. The proposed prevention apparatus confirms the excellent characteristics in response velocity and accuracy in comparison with the conventional circuit breaker(RCD) through various operation performance analysis.