• Composites Research
• /
• v.33 no.6
• /
• pp.336-340
• /
• 2020

In this study, carbon aerogels (CA) were prepared by sol-gel polycondensation of resorcinol and furfural in isopropanol using hexamethylenetetramine as a catalyst, and then directly drying the organic gels under isopropanol freeze-drying conditions, followed by carbonization under a nitrogen atmosphere. The preparation conditions of the CA were explored by changing the mole ratio of resorcinol to furfural. The effect of the preparation conditions on the pore structure of the CA was studied by nitrogen adsorption isotherms. The characteristics of the CA were studied by scanning and transition electron microscopy, and infrared spectrometry. The accessibility of pores and performance of the CA as an electrode in electric double layer capacitors were also electrochemically investigated. As a result, BET surface area and specific capacitance increased with the molar ratio of resorcinol to catalyst (R/C) ratio; the maximum values of 765 ㎡/g and 132 F/g were achieved at the R/C ratio of 200, respectively. Consequently, it was confirmed that increasing the R/C ratio increased the average pore size of the CA electrode, which improved the rate capability of the system.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.2
• /
• pp.184-193
• /
• 2023

This study investigates the effects of a carbon fiber layer formed on the surface of an etched aluminum current collector on the electrochemical properties of the activated carbon electrodes for an electric double layer capacitor. A particle size analyzer, field-emission SEM, and nitrogen adsorption/desorption isotherm analyzer are employed to analyze the structure of the carbon fiber layer. The electric and electrochemical properties of the activated carbon electrodes using a carbon fiber layer are evaluated using an electrode resistance meter and a charge-discharge tester, respectively. To uniformly coat the surface with carbon fiber, we applied a planetary mill process, adjusted the particle size, and prepared the carbon paste by dispersing in a binder. Subsequently, the carbon paste was coated on the surface of the etched aluminum current collector to form the carbon under layer, after which an activated carbon slurry was coated to form the electrodes. Based on the results, the interface resistance of the EDLC cell made of the current collector with the carbon fiber layer was reduced compared to the cell using the pristine current collector. The interfacial resistance decreased from 0.0143 Ω·cm² to a maximum of 0.0077 Ω·cm². And degradation reactions of the activated carbon electrodes are suppressed in the 3.3 V floating test. We infer that it is because the improved electric network of the carbon fiber layer coated on the current collector surface enhanced the electron collection and interfacial diffusion while protecting the surface of the cathode etched aluminum; thereby suppressing the formation of Al-F compounds.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.764-767
• /
• 2005

Photoaligning polymers usually possess "sofe" surface, containing flexible groups and provide relatively small anchoring energy($W<10^{-2}$ erg $cm^{-2}$). In this case field-induced reorientation of director on the aligning surface is essential. We have shown that surface director reorientation can modify the aligning surface and result in gliding of the axis of easy orientation of LC. this phenomena together with adsorption/desorption of ions in electric field cause strong sticking effect in LCDs photoaligning materials. We proposed a method of decreasing of the sticking effect based on irradiation of the photoaligning surface by an unpolarized light.

• Journal of Electrochemical Science and Technology
• /
• v.5 no.3
• /
• pp.82-86
• /
• 2014

This work presents the variation of formic acid oxidation on Pt depending on hydrodynamic condition using a rotating disk electrode. As the rotating speed increases, the oxidation rate of formic acid decreases under voltammetric and chronoamperometric measurements. The coverages of poison formed from formic acid during the chronoamperomertric investigations decrease when the rotating speed increases. As the roughness factor of Pt electrode surface increases, on the other hand, the current density of formic acid oxidation increases. These observations are discussed in terms of the tangential flow along Pt electrode surfaces generated by the rotating disk electrode, which reduces a contact time between formic acid and a Pt site, thus the formic acid adsorption.

• Carbon letters
• /
• v.6 no.2
• /
• pp.86-88
• /
• 2005

Mesoporous activated carbon (AC) was prepared from aged petroleum coke through chemical activation. The AC has a specific surface area of 1733 $m^2/g$ and a mean pore diameter of 2.37 nm. The volume fraction of 2 to 4nm pores is 56.74%. At a current density of 10 mA/$cm^2$, a specific capacitance of 240 F/g is achieved representing the use factor of the surface area of 69.2%. And the electrical double layer capacitor (EDLC) based on the AC shows an excellent power performance. This result suggests that the presence of high fraction of mesopores can effectively increase the adsorption efficiency of the specific surface area of the AC and enhance the power performance of EDLC based on the efficient surface area of the AC.

• Journal of Industrial Technology
• /
• v.25 no.A
• /
• pp.141-149
• /
• 2005

We investigated numerically the evolutions of several chemical species which are important for film growth and particle generation in the pulsed $SiH_4$ plasmas. During the plasma-on, the $SiH_x$ concentration increases with time mainly by the generation reaction from $SiH_4$, but, during the plasma-off, decreases because of the hydrogen adsorption reaction. During the plasma-on, the concentrations of negative ions increase with time by the polymerization reactions of negative ions and those become almost zero in the sheath regions because of the electrostatic repulsion. During the plasma-off, the concentrations of negative ions decrease with time by the neutralization reactions with positive ions and some negative ions can diffuse toward the sheath regions because there is no electric field inside the reactor. The polymerized negative ions of higher mass can be reduced successfully by using the pulsed plasma process.

• Journal of the Korean Chemical Society
• /
• v.20 no.2
• /
• pp.153-157
• /
• 1976

The purpose of this paper is to use lignin. Lignin was obtained by digestion of Korean pine wood, purified, and identified. After carbonizing lignin by con $c-H_2SO_4$, the resulting carbon was converted into active carbon by activating it in the electric kiln. The adsorptivity of this active carbon was obtained by measurement with a spectro-photometer. It has been found as a result that adsorption power is 89%.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.2020-2021
• /
• 2007

Viologen derivative has been widely investigated because of their well-electrochemical behavior including the electron acceptor for the electric charge delivery mediation of the devices. The viologen exist in three main oxidation states, namely, $V^{2+}{\rightleftarrows}V^{{\cdot}+}{\rightleftarrows}V^0$. These redox reactions are highly reversible and can be cycled many times without significant side reaction. In this paper, we determined the time dependence to resonant frequency shift of QCM during self-assembly process and the electrochemical behavior of the self-assembled viologen monolayers by electrochemical QCM method. The redox reactions of viologen were highly reversible and the EQCM has been employed to monitor the electrochemically induced adsorption of SAMs during the redox reactions.

• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.58-62
• /
• 2010

CNT-$TiO_{2}$ nano complexes were prepared from $TiOSO_4$ and multi-walled carbon nanotube (MWCNT) by hydrolysis. The CNTs were dispersed uniformly with anatase $TiO_{2}$ in the prepared $TiO_{2}$-CNT complexes. The increasing MWCNT ratio leads to increased crystalline carbon and O/Ti ratio. The decomposition degree of methylene blue was experienced according to UV radiation time for study adsorption and photocatalytic activity. The samples having high MWCNT ratio show high adsorption and photodegradation. The high specific surface area, functional group having oxygen, low band gap energy, high electric conductivity, high volume to surface ratio, uniform structure and properties of MWCNT assist photocatalytic activity of CNT-$TiO_{2}$ complex.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.5
• /
• pp.60-71
• /
• 2008

Through analyzing the specific physicochemical alterations in depth-based soil at reclaimed dredging area, the baseline data were provided for developing the reclaimed dredging area as natural landscape planting sites and ecological-landscape sites based on the soil improvement technology. There was no physical disturbance for 15 to 20 years in Gwangyang Bay reclaimed dredging area after reclamation. Physicochemical examinations of the soil were performed based on the vertical depth. Results of physicochemical analysis such as pH, electric conductivity, total salt contents, silt, clay contents, available phosphorus, calcium, magnesium, sodium, chlorine, and sodium-adsorption ratio showed increasing patterns with the depth while total organic contents, total nitrogen, and sand showed decreasing patterns. Potassium as an exchangeable cation, showed similar distribution patterns between the shallow and deep soil. This result strongly implied that long-term exposure to natural rainfall in reclaimed dredging area altered soil characteristics related to salinity. This research demonstrated that there were no remarkable differences in physicochemical characteristics at soil depth and groundwater table height, suggesting a baseline data for developing reclaimed dredging area. Additional investigation is required for different reclaimed dredging areas. Also, additional monitoring and examination are need on plant communities and time variable alteration in the soil to test the feasibility of reclaimed dredging areas as natural landscape planting sites and ecological-landscape sites.