• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.601-604
• /
• 2001

The insulation materials of cables used for underground power transmission requires a higher insulating capability. and the most popular method to examine the cable is partial discharge test due to applying variation voltage. In the thesis. air void. silicone oil. of which may possibly exist real cables. are simulated by Electra 2D program. Also the relations between calculated field strength and the void defect type in the cable joint materails. In the modeling. electic field inner to the cable joint material composed by XLPE and EPDM is modeling simulated. We obtained the electric field distribution in void due to two conditions.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.2
• /
• pp.67-76
• /
• 1991

This study showes suitable number of branch circuit and receptacle in residential apartments and houses by surveying and analyzing using practic of consents and domestic electic machinery, layout of indoor furniture This results will offer optimum design of wiring equipment, increse saftety and convienience when residents use domestic electic machinery and interior wiring devices.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.9-15
• /
• 1996

An electric field induced by a point dipole soruce within a conductor-backed lossy dielectric slab above the earth is calculated by anumerical method. the calcualtion is peformed on the plane which is parallel to the conductor plane and containing the point dipole soruce. Computed S$_{21}$ values of two parallel planar dipole antennas and two collinear planar dipole antennas are compared against each other, as well as the electic field magnitudes in those arrangements.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.134-141
• /
• 1993

Electro-Rheological(ER) fluids undergo a phase-change when subjected to an external electic field, and this phase-change typically manifests itself as a many-order-of-magnitude change in the rheological behavior. This phenomenon permits the global stiffness and energy- dissipation properties of the beam structures to be tuned in order to synthesize the desired vibration characteristics. This paper reports on a proof-of-concept experimental investigation focussed on evaluation the vibration properties of hollow cantilevered beams filled with an ER fluid. and consequently deriving an empirical model for predicting field-dependent vibration characteristics. A hydrous-based ER fluid consisting of corn starch and silicone oil is employed. The beams are considered to be uniform viscoelastic materials and modelled as a viscously-damped harmonic oscillator. Natural frequency, damping ratio and elastic modulus are evaluated with respect to the electric field and compared among three different beams: two types of different volume fraction of ER fluid and one type of different particle concentration of ER fluid by weight. Transient and forced vibration responses are examined in time domain to demonstrate the validity of the proposed empirical model and to evaluate the feasibility of using the ERfluid as an actuator in a closed-loop control system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.216-218
• /
• 2003

The Judd-Ofelt theory is becoming basis that induced of ligand field of electric dipole transitions of between 4f electic states. It is developed for the rare earth ions through judd and of ofelt. This theory be applicate success to the raer earth ions in solid, liquid and gas state. This paper reports a optical characteristices of Nd:glass by using the Judd-Ofelt Method.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1621-1623
• /
• 1996

The dielectric and polarizable properties of 0.85Pb$Mg_{1/3}Nb_{2/3}$)$O_3$-$0.125PbTiO_3$-$0.25BaTiO_3$ Ceramics have been investigated as a addition of the amount of $La_{2}O_{3}$($0{\leq}x{\geq}0.05$). The Temperature-dependant electrostictive characteristics of 0.85PMN-0.125PT-0.25BT relaxor ferroelectic system were improved by enhencing the extent of the diffuse phase transition(DPT). This was achieved using PMN-PT-BTceramics by the partial substitution of La at the Pb site. The curie temperature and the maximum dielectic permittivity decreased by substituting $La_{2}O_{3}$ and the electic field-related hysteresis phenomena decreased with increasing $La_{2}O_{3}$ substitution amount. It is showed decreasing in induced strain for electric field with increasing $La_{2}O_{3}$ substitution.

• Journal of the Korean Ceramic Society
• /
• v.33 no.11
• /
• pp.1292-1300
• /
• 1996

In-site X-ray diffraction measurements under electric field up to 20kV/ cm were carried out on PLZT (x/70/30) with x=7.5, 8.0, 8.5, and 10.5 All of PLZT belonged to cubic phases. At x=7.5, 8.0 and 8.5 PLZT behaved as an antiferroelectric under low electric fields up to 4-8 kV/cm. PLZT became ferroelectric at the higher electric fields. The high-temperature measurements on the dielectric constants of PLZT with x=7.5, 8.0 and 8.5 showed that they were similar to relaxor ferroelectrics and underwent a diffuse phase transition from antiferroelectrics to paraelectrics at 50-7$0^{\circ}C$. Their P-E hysteresis curves confirmed that they were antifer-roelectrics. The broad distribution of Curie points suggests that there is a significant disorder of cations and vacances in the crystal structure of those PLZT due to La-substitution. The variation of the lattice strain of PLZT(10.5/70/30) with electic field was very small and did not show any hysteresis confirming that it was paraelectric. The degree of the electric-induced strain variation decreased as La doping increased. In PLZT(7.5/70/30) the intensity of 110 reflection changes sensitively by applying electric field. Some domains with polarization parallel to [110] appeared to be developed in the field-induced ferroelectric phase of the PLZT.

• Resources Recycling
• /
• v.6 no.3
• /
• pp.15-21
• /
• 1997

Flyash from a coal-hed power plan1 is produced approximtcly 3 million tons m 1996 and causes the serious environmentalpmblem due to the disposal in the ash pond. Flyash is an accepted additive in concrete where it adds strength, sulfate ateresistanceand reduced cost, provided acccptablc levcls of unbunrned carbon are mmtmed This papzr describes to investigate thc technicalfeasibility of a dry triboelcctrostatlcp roccss to scparate unburned carbon h m f lyash into economically valuable produck Puliclesof unburned carbon and flyash can be impded positivc and negative surface charzes. rcapeclively. with a copper tniochargcr dueto dirferences in the work function values of thc particles and the tnbacharger. and cm he separated by passing thcm throuph anexternal electic field. A laboratory s d e separation system consists of r sacw feeder for ash supply, a tniocharger, verticalcollecling copper plates, power supplies, a flow meter, and a fan. Separation tests taking into account separahian efficiency and ashrecovery showed that flyash recovery was sh-nngly dependent an thc tnbocharger geomzhy, elect"c ficld strength. flyssh s ~ c a,n dash feeding late. Optimal separation conditions were flyash size less than 125 Fm and electric field shcngrh of 200 kV1m. Ovcr 80%of the flyash with 7% lass on ignition was recovered at wrbon contznts less than 3%bon contznts less than 3%

• Journal of Embryo Transfer
• /
• v.19 no.1
• /
• pp.43-51
• /
• 2004

The present study was conducted to investigate the effects of fusion and/or activation protocol on in vitro development of porcine somatic cell nuclear transfer (SCNT) embryos. Porcine fetal fibroblast cells were transferred into the perivitelline space of enucleated in vitro matured oocytes. Cell fusion and activation were induced simultaneous fusion/activation (SA) or delayed activation (DA) with or without cytochalasin B (CB) treatment with electic pulses in 0.28 M mannitol-based medium. The SCNT embryos were cultured in vitro for 7 days and stained with Hoechst 33342 to determine the number of nuclei. After 7 days culture, cleavage and blastocyst formation rates were 72.4% and 7.6% in SCNT and 76.3% and 20.4% in parthenotes. To examine the effect of electric field strengths on development of SCNT embryos, oocytes were fused two pulses of 110 V/mm, 130 V/mm or 150 V/mm for 30 sec post-injection. The fusion and cleavage rates in 130 V/mm group (70.2% and 72.6%) and 150 V/mm group (72.6% and 70.5%) were higher (P<0.05) than 110 V/mm group (47.1% and 48.6%), respectively. However, the rate of embryos developing to the blastocyst stage (8.1%, 9.7% and 10.7%) were not different among three groups. The cleavage rates and the blastcyst formation rates were not different among three treatment groups (SA group, 71.4% and 9.7%; SA+CB treatment group, 74.7% and 8.0%; DA+CB treatment group, 70.8% and 11.2%, respectively). And, no different in the number of cells in blastocysts was observed among the three groups (22.5$\pm$12.8, 23.3$\pm$11.2 and 21.6$\pm$10.4, respectively). These result suggest that two pulses of 130 V/mm or 150 V/mm for 30 sec with SA treatment or DA treatment are enough for fusion/activation of porcine somatic cell nuclear transfer (SCNT) embryos to develop to the blastocyst stage.