• Journal of Pharmaceutical Investigation
• /
• 제36권1호
• /
• pp.31-38
• /
• 2006

Using a Rheometries Dynamic Analyzer (RDA II), the dynamic viscoelastic properties of a semi-solid ointment base (vaseline) in large amplitude oscillatory shear flow fields were measured over a temperature range of $25{\sim}45^{\circ}C$ and the linear viscoelastic behavior in small amplitude oscillatory shear flow fields was investigated over a wide range of angular frequencies. In this article, the nonlinear viscoelastic behavior was reported from the experimentally obtained data and the effect of temperature on this behavior was discussed in detail. In addition, the angular frequency and temperature dependencies of a linear viscoelastic behavior were explained. Finally, the applicability of a time-temperature superposition principle originally developed for polymeric materials was examined using a shift factor. Main results obtained from this study can be summarized as follows : (1) At very small strain amplitude region, vaseline shows a linear viscoelastic behavior independent of the imposed deformation magnitudes. Above a critical strain amplitude $({\gamma}_{0}=0.1{\sim}0.2%)$, however, vaseline exhibits a nonlinear viscoelastic behavior ; indicating that both the storage modulus and dynamic viscosity are sharply decreased with increasing deformation magnitude. (2) In large amplitude oscillatory shear flow fields, an elastic behavior (storage modulus) has a stronger strain amplitude dependence and begins to show a nonlinear behavior at a smaller strain amplitude region than does a viscous behavior (dynamic viscosity). (3) In small amplitude oscillatory shear flow fields, the storage modulus as well as the loss modulus are continuously increased as an increase in angular frequency and an elastic nature is always superior to a viscous behavior over a wide range of angular frequencies. (4) A time-temperature superposition principle can successfully be applicable to vaseline. This finding allows us to estimate the dynamic viscoelastic behavior of vaseline over an extraordinarily extended range (11 decades) of angular frequencies inaccessible from the experimentally measured range (4 decades).

• 비파괴검사학회지
• /
• 제20권5호
• /
• pp.390-396
• /
• 2000

원자로 재료인 SA 508 Class 3 강용접부 및 열영향부 모사 시험편에 대해서 초음파공명분광법으로 동적탄성계수를 측정하였다. 등방성 탄성계수를 가정하여 초기 추정 탄성 계수, $c_{11},\;c_{12}$ 및 $c_{44}$로부터 장방형 시편의 공명 주파수를 계산하였으며 계산된 주파수와 초음파공명분광법으로 측정된 주파수를 비교, 반복 수렴 절차를 거쳐 정밀한 탄성계수를 구했다. 열처리 조건의 차이 및 미세 조직의 차이에 따라 영률 및 전단 계수의 차이가 확실하게 나타났다. 미세한 베이나이트 조직에서의 영률 및 전단 계수는 조대한 마르텐사이트 조직보다 높았으며 이러한 경향은 미세 경도 시험 등의 다른 실험 결과와도 일치하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1115-1122
• /
• 2011

Reinforced-Roadbed materials are usually composed of crushed stones. Repeated load application can induce deformation in the reinforced-roadbed layer so that it causes irregularity of track. Thus it is important to develop a prediction model of elastic modulus based on stress-strain relation under repeatitive load in order to investigate behavior of reinforced roadbed. The prediction model of elastic modulus of the material can be obtained from repeated triaxial test. However, a proper size of the sample for the test must be used. In this study, a large repeatitive triaxial test apparatus with the sample size of diameter of 30 cm and height of 60cm was adapted for performing test of the crushed stone reinforced-roadbed considering large particle size to get resilient modulus Mr. The obtained resilient modulus was compared to shear modulus obtained from mid size resonant column test. The sample size effect is somewhat large enough so that it is required to design a scale factor based on similarity law in order to use smaller samples for getting elastic modulus of the crushed stone reinforced-roadbed material. A scale factor could be obtained from this study.

• 대한기계학회논문집B
• /
• 제32권7호
• /
• pp.487-496
• /
• 2008

Quartz crystal oscillator is frequently used in measuring a very small amount of mass attached to or adsorbed on the surface of an electrode on the quartz plate. The physical principle is that the resonance frequency of the shear vibration of the quartz caused by an applied electric field is a function of the mass. Recently, effort has been tried to measure physical properties of viscoelastic fluids, such as viscosity and shear modulus. This paper presents useful formula that can be used in estimating the properties of viscoelastic fluids. Important finding in this analysis is that the formula can produce multiple values for the physical properties of the viscoelastic materials.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.229-239
• /
• 2013

암반에서의 탄성계수는 암반의 변형특성을 나타내는 매우 중요한 인자로서 암반에서의 터널굴착 또는 다른 활동 등으로 인해 발생되는 변위를 파악하는데 자주 이용된다. 그럼에도 불구하고 현재까지는 암석종류 및 절리특성을 반영하여 탄성계수를 산정하는 연구는 미흡한 것으로 판단된다. 따라서, 본 연구는 다양한 암석 및 절리상태에서 암반의 탄성계수를 추정하고자 한다. 이를 위해서 암석상태 및 절리특성을 고려한 수치해석 매개변수 연구를 수행하고, 조사된 변위결과를 통해 암반에서의 원형터널에 대한 탄성이론을 역이용하여 암석종류 및 절리특성이 반영된 탄성계수를 추정하는데 사용될 것이다. 본 연구를 통해 얻어진 결과는 절리가 형성된 암반에서 터널굴착 또는 다른 활동 등으로 인해 발생되는 변위를 파악함에 있어서 그 활용도가 매우 클 것으로 기대된다.

• 대한토목학회논문집
• /
• 제31권2C호
• /
• pp.83-92
• /
• 2011

암반에서의 탄성계수는 암반의 변형특성을 나타내는 매우 중요한 인자로서 암반에서의 터널굴착으로 인한 내공변위를 파악하는데 이용된다. 그럼에도 불구하고 현재까지는 암석종류 및 절리특성을 반영하여 탄성계수를 산정하는 연구는 미흡한 것으로 판단된다. 따라서, 본 연구는 다양한 암석 및 절리상태에서 암반의 탄성계수를 추정하는 방법과 그 결과를 제시하고자 한다. 이를 위해서 2차원 개별요소법에 근거한 수치해석이 수행될 것이며 이를 통해 암석과 절리상태가 고려된 터널굴착 유발 내공변위가 조사될 것이다. 조사된 변위결과는 암반에서의 원형터널에 대한 탄성이론을 역이용하여 암석종류 및 절리특성이 반영된 탄성계수를 추정하는데 사용될 것이다. 본 연구를 통해 암석종류 및 절리특성을 고려하여 추정된 탄성계수는 향후 실무에서 절리가 형성된 암반터널에서의 발생변위를 파악함에 있어서 그 활용도가 매우 클 것으로 기대된다.

• Steel and Composite Structures
• /
• 제20권2호
• /
• pp.227-249
• /
• 2016

The objective of this work is to present a zeroth-order shear deformation theory for free vibration analysis of functionally graded (FG) nanoscale plates resting on elastic foundation. The model takes into consideration the influences of small scale and the parabolic variation of the transverse shear strains across the thickness of the nanoscale plate and thus, it avoids the employ use of shear correction factors. Also, in this present theory, the effect of transverse shear deformation is included in the axial displacements by using the shear forces instead of rotational displacements as in available high order plate theories. The material properties are supposed to be graded only in the thickness direction and the effective properties for the FG nanoscale plate are calculated by considering Mori-Tanaka homogenization scheme. The equations of motion are obtained using the nonlocal differential constitutive expressions of Eringen in conjunction with the zeroth-order shear deformation theory via Hamilton's principle. Numerical results for vibration of FG nanoscale plates resting on elastic foundations are presented and compared with the existing solutions. The influences of small scale, shear deformation, gradient index, Winkler modulus parameter and Pasternak shear modulus parameter on the vibration responses of the FG nanoscale plates are investigated.

• International Journal of Reliability and Applications
• /
• 제5권1호
• /
• pp.1-13
• /
• 2004

It is recently well recognized that the technique for the one-sided stress wave velocity measurement in structural materials provides measurement in structural materials provides valuable information on the state of the material such as quality, uniformity, location of cracked or damaged area. This technique is especially effective to measure velocities of longitudinal and Rayleigh waves when access to only one surface of structure is possible. However, one of problems for one-sided stress wave velocity measurement is to get consistent and reliable source for the generation of elastic wave. In this study, the laser based surface elastic wave was used to provide consistent and reliable source for the generation of elastic wave into the materials. The velocities of creeping wave and Rayleigh wave in materials were measured by the one-sided technique using laser based surface elastic wave. These wave velocities were compared with bulk wave velocities such as longitudinal wave and shear wave velocities to certify accuracy of measurement. In addition, the mechanical properties such as poisson's ratio and specific modulus(E/p) were calculated with the velocities of surface elastic waves.

• 지질공학
• /
• 제18권4호
• /
• pp.371-379
• /
• 2008

본 연구에서는 경기도 일대의 편마암지역 11곳에서 다운홀(down-hole) 탄성파탐사를 이용하여 획득한 탄성파속도를 이용, 편마암지역에서의 탄성파 속도와 동탄성계수와의 상관성을 조사하였다. 연구결과 편마암에서의 탄성파속도의 특성은 $V_s=0.5589{\times}V_p$ 상관관계를 보여준다. 탄성파 속도와 동탄성계수와의 상관관계는 두 개의 군으로 분리된다. 풍화가 진행됨에 따라 첫 번째 군은 암석의 비중에 큰 영향을 받지만 두 번째 군에서는 절리면의 간격에 영향을 받는다. 풍화가 진행됨에 따라 첫 번째 군은 감소하는 경향을 보인다. 경암반에서의 압축파속도($V_p$) 동탄성계수($E_d$, $G_d$, $K_d$)의 상관관계는 선형으로 분석되었지만, 보통암반에서의 압축파속도($V_p$)와 동탄성계수($E_d$, $G_d$, $K_d$)의 상관관계는 2차 함수 포물선 곡선의 형태를 띠는 것으로 분석되었다. 전단파속도($V_s$)와 동탄성계수($E_d$, $G_d$, $K_d$)의 상관관계 또한 압축파속도($V_p$)와 유사한 결과를 보이는 것으로 분석되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 지반환경 및 준설매립에관한 학술세미나
• /
• pp.72-84
• /
• 2001

In order to utilize mass of oyster shells for a partial substitute material for reclamation, we investigate the shear characteristics of dredged sluge mixed with oyster shells. the apparent modulus of elasticity of the this mixture are obtained from the triaxial compression tests and is utilized to characterize the apparent modulus of elastic of the oyster shells by carrying out some numerical analysis based upon the homogenization theory. We got the conclusion by a series of experiment, 1) It is verified that modulus of elasticity of dredged clay is improved by mixing with oyster shells. 2) The homogenization method for deducing apparent modulus of elasticity of oyster shells, which can consider micro-structure of mixed soil, is introduced. The elastic modulus is affected from the skeleton structure of oyster shell. The effect of 49kPa is bigger than that of 98kPa.