• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.344-353
• /
• 1996

A fundamental study was conducted to obtain the basic data involved in nondestructive quality evaluation of the fruit and vegetables. An experimental equipment for ultrasonic propagation characteristics of the fruit and vegetables such as radish , carrot , potato, and apple was set up and also power spectrum analysis system of an ultrasonic wave through the fruit and vegetables was set up. The velocity and attenuation of ultrasonic wave through the tissue specimens from the fruit and vegetables were measured and analyzed. The elastic modulus and density by the mechanical method currently used were compared with those using by ultrasonic method. The ultrasonic tranit time was almost linearly increased with the length of the specimens and attenuation of ultrasonic was mainly affected by the internal flbrous structure of the products. The regression equation was derived from the highly correlated experimental variables.

• 한국지반공학회지:지반
• /
• 제9권4호
• /
• pp.93-102
• /
• 1993

연약 지반위에 축조된 토질 구조물은 제체의 자중으로 인하여 오랜 기간 동안 침하가 계속되는데 이는 시간표존적 거동인 압밀과 크리프(creep)가 동시에 작용하여 발생된다. 본 연구에서는 안산의 해성점토에 대하여 크리프거동 해석에서 필요한 정수를 구하고 수치해석시 중요시되고 있는 구속응력과 응력수준에 따른 크리프정수의 영향 특성에 대하여 연구하였다. 그 결과 탄성계수 E1과 크리프정수 n는 적용응력 수준에 영향을 받는 것으로 나타나 응력수준에 따른 크리프정수 결정식을 제시하였다.

• Geomechanics and Engineering
• /
• 제17권1호
• /
• pp.11-18
• /
• 2019

The formulas offered so far on the settlement of raft footings provide only a rough estimate of the actual settlement. One of the best ways to make an accurate estimation is to conduct 3-dimensional finite element analyses. However, the required procedure for these analyses is comparatively cumbersome and expensive and needs a bit more expertise. In order to address this issue, in this study, a raft footing settlement formula was developed based on ninety finite element model configurations. The formula was derived using multi-parameter exponential regression analyses. The settlement formula incorporates the dimensions and the elastic modulus of a rectangular raft, vertical uniform pressure and soil moduli and Poisson's ratios up to 5 layers. In addition to this, an equation was offered for the estimation of average deflection of the raft. The proposed formula was checked against 3 well-documented case studies. The formula that is derived from 3D finite element analyses is useful in optimising the raft properties.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1227-1234
• /
• 2006

Up to now, several mathematical theories based on strain energy functions have been developed for rubber materials. These theories, coupled with the finite element method, can be used very effectively by engineers to analyze and design rubber components. However, due to the complexities of the mathematical formulations and the lack of general guidelines available fur the analysis of rubber components, it is a formidable task for an engineer to analyze rubber components. In this paper a method for predicting strain energy functions - Neo-Hookean model and Mooney-Rivlin model - from the hardness using the empirical equation without any experiment is discussed. First based on the elasticity theories of rubber, the relation between stress and strain is defined. Then for the butyl rubbers, the model constants of Neo-Hookean model and Mooney-Rivlin model are calculated from uniaxial tension tests. From the results, the usefulness of the empirical equation to estimate elastic modulus from hardness is confirmed and, fur Mooney-Rivlin model, the predicted and the experimental model constants are compared and discussed.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.74-83
• /
• 1994

A series of isotropic consolidation tests, undrained and drained triaxial compression tests was carried out to investigate the physical characteristics and behaviours of marine silty sands collected from the western coast of Korea. This study also included a theoretical development of the constitutive equation to evaluate stress-strain relationship and volume change of silty sands. The results and main conclusions of the study are summarized as follows; 1. Isotropic compression and swelling index are linearly decreased with an increase in relative density. 2. Both undrained shear strengh and elastic modulus are increased with an increase in relative density and confining pressure. 3. Internal friction angles obtained from drained and undrained compression tests of the soils are proportional to relative density. 4. The phenomenon of dilatancy of each sample is less profound when confining stress is increased but more profound when relative density is increased. 5. The slope of critical state lines is 1.78 for Saemangum, 1.70 for Siewha and 1.26 for Sukmoon sands. 6. In this study, Drucker-Praper type criterion is used and hardening function of Cap model is modified by hyperbolic fuction. This will improve a lack of physical meaning of hardening parameters in conventional Cap model. 7. A newly developed constitutive equation to the forementioned silty sands and checked its applicability. This is in good agreement with the measured data.

• Tribology and Lubricants
• /
• 제36권6호
• /
• pp.320-323
• /
• 2020

Thin film coatings are commonly exploited to minimize wear and optimize the frictional behavior of various precision mechanical systems. The enhancement of thin film durability is directly related to the performance maximization of the system. Therefore, a fine approach to analyze the thin film wear behavior is required. Archard's equation is a representative and well-developed law that defines the wear coefficient, which is the probability of creating wear particles. A ploughing model is a commonly used model to determine the friction force during the abrasive contact. The equations demonstrate that the friction force and wear coefficient are inversely proportional to the hardness of the material. In this study, Archard's equation and ploughing models are modified with an effective hardness to minimize the gap between the experimental and numerical results. It is noted that the effective hardness is the hardness variation with respect to the penetration depth owing to the substrate effect. The nanoindentation method is utilized to characterize the effective hardness of Cu film. The wear coefficient value considering the effective hardness is more than three times higher than that without considering the effective hardness. The friction force predicted with the effective hardness agreed better with the results obtained directly from the friction force detecting sensor. This outcome is expected to improve the accuracy of friction and wear amount predictions.

• Structural Engineering and Mechanics
• /
• 제81권4호
• /
• pp.443-459
• /
• 2022

The paper studies the dispersion and attenuation of propagating waves in the "plate+compressible viscous fluid layer" system in the case where the fluid layer flow is restricted with a rigid wall, and in the case where the fluid layer has a free face. The motion of the plate is described by the exact equations of elastodynamics and the flow of the fluid by the linearized Navier-Stokes equations for compressible barotropic Newtonian viscous fluids. Analytical expressions are obtained for the amplitudes of the sought values, and the dispersion equation is derived using the corresponding boundary and compatibility conditions. To find the complex roots of the dispersion equation, an algorithm based on equating the modulus of the dispersion determinant to zero is developed. Numerical results on the dispersion and attenuation curves for various pairs of plate and fluid materials under different fluid layer face conditions are presented and discussed. Corresponding conclusions on the influence of the problem parameters on the dispersion and attenuation curves are made and, in particular, it is established that the change of the free face boundary condition with the impermeability condition can influence the dispersion and attenuation curves not only in the quantitative, but also in the qualitative sense.

• 콘크리트학회논문집
• /
• 제18권5호
• /
• pp.677-685
• /
• 2006

수화열 균열 저감 기법 중 내부구속이 지배적인 구조물에서 단면의 내외부 온도차를 관리하는 방식은 그 활용도가 매우 높다. 그러나 현 국내 기준의 내외부 온도차와 온도균열지수 관계식은 균열 발생 가능성을 과대평가하는 경향이 있다. 본 연구에서는 그러한 평가식이 유도된 배경을 단계별로 추적하여 타당성을 검증해 보았으며, 그 결과 재령에 따른 탄성계수의 변동성이 고려되지 않은 단순한 재료모델을 사용한 경우에 해당됨을 밝혔다. 개선된 재료모델로 증분형태 구성방정식인 hypoelastic 모델을 사용한 결과 온도균열지수가 기존 식보다 증가되었으며, 그 증가량은 다양한 조건들에 의존하는 것으로 나타났다. 본 연구의 분석 결과와 해외사례를 참조하여 평가식의 개선된 형태를 고찰하였으며 또한 평가시 필요한 내외부 온도차를 시공 조건들의 영향을 고려하여 용이하게 추정할 수 있는 식도 제안하였다. 추후 해석 및 실험 자료가 축적되면 구조물과 배합의 주요 특징들을 반영하여 평가식을 세분화하는 것도 바람직하다고 생각된다.

• 한국지반공학회지:지반
• /
• 제10권2호
• /
• pp.85-96
• /
• 1994

공진주 실험기는 전단탄성계수, 영계수 및 감쇠비로 표현되는 지반의 동적물성치를 연구하기 위한 중요한 실내 실험법으로 널리 사용되어 왔다. 본 연구에서는 Stokoe식 공진주 실험기를 이용하여 전단 변형률 10-4%-10-1% 범위에서 대표적인 국내 노상토의 동적 물성치를 연구하였다. 전단탄성계수와 감쇠비는 한계변형률 Ix10-3%부근에서 부터 변형률의 영향을 받기 시작 하였다. 한계 변형률 이하에서 최대 전단탄성계수(Gmin)는 구속압 (Qc)에 따라 (Qc)0.61에 비례하여 증가하였고 최소감쇠 비(Dmin)는 1%-5.7% 범위에 분포하였다. 한계 변형률 이상에서 정규화 탄성계수 감소곡선은 Ramberg-Osgood식으로 잘 나타낼 수 있으며 Seed와 Idriss가 사질토 를 이용하여 얻은 감소곡선과 거의 일치하였다.

• 콘크리트학회논문집
• /
• 제27권5호
• /
• pp.521-530
• /
• 2015

최근 개발중인 초고강도 또는 강섬유보강 초고강도 콘크리트는 현행 설계기준으로 설계할 경우 그 안전성에 대해 별도의 실험 또는 해석적 증명이 필요하다. 이를 위한 철근콘크리트 부재의 상세 해석에는 응력-변형률 관계의 정의가 필요하다. 이를 위해 본 연구에서는 현행 설계기준의 제한 범위를 벗어나는 강섬유보강 초고강도 콘크리트의 압축응력하에서의 기계적 특성을 정의하였다. 80~200 MPa 의 압축강도를 보유한 분체 콘크리트 매트릭스에 강섬유를 혼입하였으며, 섬유의 보강량에 따른 압축강도의 증진률에 대해 분석하고 압축강도에 따른 탄성계수와 최대응력 발현시의 변형률에 대해 조사 분석하였다. 넓은 콘크리트 압축강도 범위내에서 사용성 확보를 위해 기존 연구결과로부터 수집된 압축강도 증진률, 탄성계수, 최대응력 발현시 변형률의 크기에 대한 결과를 활용하여 기존 추정식의 평가를 수행하였다. 또한, 강섬유가 보강되어 있지 않은 매트릭스에 대한 기존 추정식 중 정확도가 높은 식을 기반으로, 강섬유의 영향을 반영할 수 있는 새로운 추정식을 위한 계수를 도출하였다.