• Structural Engineering and Mechanics
• /
• 제26권4호
• /
• pp.441-457
• /
• 2007

A new numerical model based on the spline finite strip method is presented here for the analysis of buckling of built-up columns with and without end stay plates. The channels are modelled with spline finite strips while the connecting elements are represented by a 3D beam finite element, for which the stiffness matrix is modified in order to ensure complete compatibility with the strips. This numerical model has the advantage to give all possible failure modes of built-up columns for different boundary conditions. The end stay plates are also taken into account in this method. To validate the model a comparative study was carried out. First, a general procedure was chosen and adopted. For each numerical analysis, the lowest buckling loads and modes were calculated. The basic or "pure" buckling modes were identified and their critical loads were compared with solutions obtained using analytical methods and/or other numerical methods. The results showed that the proposed numerical model can be used in practice to study the elastic buckling of built-up columns. This model is considered accurate and efficient for the local buckling of short columns and global buckling for slender columns.

• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6521-6526
• /
• 2013

판형보강재의 강성 및 세장비의 영향이 보강판시스템의 면내압축강도에 미치는 영향을 살펴보기 위해 탄성 및 비탄성 극한강도해석이 수행되었다. 탄성좌굴해석에서는 보강재의 국부좌굴현상이 고려될 수 없지만 보강재의 강성이 일정정도 확보되면 역대칭모드 좌굴형상이 발생되면서 보강판의 면내압축강도가 확보되는 것으로 파악되었다. 초기결함 및 잔류응력이 고려된 극한강도해석에서는 초기결함의 모드형상이 극한강도에 민감하게 영향을 미친다는 사실이 확인되었다. 도로교설계기준에서 제시하는 판형보강재의 세장비제한은 해석 결과와 비교하였을 때 보수적인 수치로 평가되었다.

• Composites Research
• /
• 제14권4호
• /
• pp.1-7
• /
• 2001

본 연구는 등분포 압축을 받는 비대칭 연단보강된 직교이방성 개방단면 구조용 부재의 탄성국부좌괄에 대한 이론적 연구의 결과이다. 비대칭 연단보강재는 비틀림강성을 무시한 보요소로 간주하였다. 플랜지판의 일부와 플랜지의 연단에 부착된 판으로 구성된 비대칭 연단보강재에 대한 이론적 해석 모델을 제시하였으며, 이 결과로부터 얻어지는 비대칭 연단보강재 단면의 도심을 지나는 축에 대한 단면2차모멘트를 계산하였다. 유도된 식을 사용하여 비대칭 연단보강된 직교이방성 I형 압축재의 국부좌굴계수를 구하였으며 그 결과를 그래프로 제시하였다.

• 한국강구조학회 논문집
• /
• 제17권6호통권79호
• /
• pp.707-715
• /
• 2005

파형강판은 파형 형상으로 가공된 강판으로 높은 면내, 면외 방향의 강성을 갖으며, 건물, 교량 등으로 적용도가 높아지고 있다. 파형강판을 플레이트 거더나 프리스트레스트 박스거더교의 복부판으로 적용하면, 파형강판의 아코디언 효과에 의해 플랜지가 휨응력을 복부판이 전단응력을 대부분 지지하는 효율적인 구조를 얻을 수 있다. 전단응력을 받는 파형 강판은 전체좌굴, 국부좌굴 및 연성좌굴에 의해 내하력을 상실할 수 있다. 세 가지 좌굴 모드 중 연성 좌굴에 대한 명확한 분석은 거의 이루어지지 않았고 보수적인 강도 예측을 위한 강도 감소식이 사용되고 있다. 따라서 본 연구에서는 연성 좌굴 거동에 미치는 기하학적인 인자들의 영향을 파악하기 위하여 유한요소해석법을 이용한 좌굴해석이 수행되었다. 해석 결과는 연성 좌굴은 패널의 세장비와 북부판 높이 두께비의 복합변수에 의존하는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제88권2호
• /
• pp.129-140
• /
• 2023

To increase the stiffness and strength of a reinforced concrete shear wall, steel plates are bolted to the sides of the wall. The general behavior of a composite concrete-steel shear wall is dependent on the buckling of the steel plates that should be prevented. In this paper, the unilateral buckling of steel plates of a composite shear wall is studied using the Rayleigh-Ritz method. To model the unilateral buckling of steel plate, the restraining concrete wall is described as an elastic foundation with high stiffness in compression and zero stiffness in tension. To consider the effect of bolt connections on the plate's buckling, a constrained optimization problem is solved by using Lagrange multipliers method. This process is used to obtain the critical elastic local buckling coefficients of unilaterally-restrained steel plates with various numbers of bolts, subjected to pure compression, bending and shear loading, and the interaction between them. Using these results, the spacing between shear bolts in composite steel plate shear walls is estimated and compared with the results of the AISC seismic provisions (2016). The results show that the AISC seismic provisions(2016) are overly conservative in obtaining the spacing between shear bolts.

• Advances in nano research
• /
• 제7권2호
• /
• pp.89-98
• /
• 2019

In this work, the thermal buckling characteristics of zigzag single-walled boron nitride (SWBNNT) embedded in a one-parameter elastic medium modeled as Winkler-type foundation are investigated using a nonlocal first-order shear deformation theory (NFSDT). This model can take into account the small scale effect as well as the transverse shear deformation effects of nanotubes. A closed-form solution for nondimensional critical buckling temperature is obtained in this investigation. Further the effect of nonlocal parameter, Winkler elastic foundation modulus, the ratio of the length to the diameter, the transverse shear deformation and rotary inertia on the critical buckling temperature are being investigated and discussed. The results presented in this paper can provide useful guidance for the study and design of the next generation of nanodevices that make use of the thermal buckling properties of boron nitride nanotubes.

• 한국강구조학회 논문집
• /
• 제19권6호
• /
• pp.725-735
• /
• 2007

이 연구에서는 두께가 얇은 강판을 가진 철골-콘크리트 합성기둥에서 강판의 국부 좌굴 강도 및 국부 좌굴 후 강도에 대한 해석적인 연구를 수행하였다. 콘크리트 충전에 의하여 합성기둥에서 판의 국부 좌굴 성능이 향상되는 것을 경계 조건을 조정하여 해석에 반영하였고, 탄성 좌굴 해석을 통해 한계 폭-두께비를 제안하였다. 또한 초기 처짐 및 잔류 응력을 해석에 반영하여, 다양한 폭-두께비에 해당하는 평판의 비선형 유한 요소 해석을 통해 초기 국부 좌굴 강도 및 좌굴 후 강도를 산정하였다. 이러한 비선형 해석 결과를 이용하여 판의 유효 폭을 산정하였고, 유효 폭을 이용한 철골-콘크리트 합성기둥의 최대 압축 내력식을 제안하였다. 제안식에 의한 계산된 값과 기존의 실험결과를 비교함으로서 제안식의 타당성을 검증하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.109-118
• /
• 1999

Lifeline system such as oil or gas pipelines and water supply facilities are vulneratble to seismic damages because they are widely exposed to ground failures. Most seismic design criteria of buried pipelines are based on the notion that the longitudinal compressive strain and therefore buckling controls the design. Buckling analysis of buried pipelines subjected to seismic loading is performed by considering the seismic load as the sinusoidally distributed compressive load on the beam on elastic foundation in contrast to existing studies where the buckling load is treated as an end load on the beam column, An approximated analytical solution is obtained by the energy method and its validity is confirmed by the linearized finite element buckling analysis. The results show the beam mode buckling because longitudinal strains at the buckling loads are substantially lower than the strain at the onset of local buckling.

• 한국해양공학회지
• /
• 제16권5호
• /
• pp.66-72
• /
• 2002

Fracture behaviors of pipes with local wall thinning are very important for the integrity of nuclear power plant. However, effects of local wall thinning on strength and fracture behaviors of piping system were not well studied. Acoustic emission(AE) has been widely used in various fields because of its extreme sensitivity, dynamic detection ability and location of growing defects. In this study, we investigated failure modes of locally wall thinned pipes and AE signals by bending test. From test results, we could be divided four types of failure modes of ovalization, crack initiation after ovalization, local buckling and crack initiation after local buckling. And fracture behaviors such as elastic region, yielding region, plastic deformation region and crack progress region could be evaluated by AE counts, accumulative counts and time-frequency analysis during bending test. The result of the frequency range is expected to be basic data that can inspect plants in real-time.

• Steel and Composite Structures
• /
• 제15권2호
• /
• pp.131-150
• /
• 2013

This paper presents the experimental results of axially loaded stub columns of slender steel hollow square section (SHS) strengthened with carbon fiber reinforced polymers (CFRP) sheets. 9 specimens were fabricated and the main parameters were: width-thickness ratio (b/t), the number of CFRP ply, and the CFRP sheet orientation. From the tests, it was observed that two sides would typically buckle outward and the other two sides would buckle inward. A maximum increase of 33% was achieved in axial-load capacity when 3 layers of CFRP were used to wrap HSS columns of b/t = 100 transversely. Also, stiffness and ductility index (DI) were compared between un-retrofitted specimens and retrofitted specimens. Finally, it was shown that the application of CFRP to slender sections delays local buckling and subsequently results in significant increases in elastic buckling stress. In the last section, a prediction formula of the ultimate strength developed using the experimental results is presented.