• Journal of Biosystems Engineering
• /
• 제36권1호
• /
• pp.23-32
• /
• 2011

In this work, the finite element method was used to investigate the shifts of resonance frequencies and quality factor of whispering-gallery-mode (WGM) for an opto-fluidic ring resonator (OFRR) biosensor. To describe the near-field radiation transfer, the time-domain Maxwell's equations were employed and solved by using the in-plane TE wave application mode of the COMSOL Multiphysics with RF module. The OFRR biosensor model under current study includes a glass capillary with a diameter of 100 mm and wall thickness of 3.0 mm. The resonance energy spectrum curves in the wavelength range from 1545 nm to 1560 nm were examined under different biosensing conditions. We mainly studied the sensitivity of resonance shifts affected by changes in the effective thickness of the sensor resonator ring with a 3.0 mm thick wall, as well as changes in the refractive index (RI) of the medium inside ring resonators with both 2.5 mm and 3.0 mm thick walls. In the bulk RI detection, a sensitivity of 23.1 nm/refractive index units (RIU) is achieved for a 2.5 mm thick ring. In small molecule detection, a sensitivity of 26.4 pm/nm is achieved with a maximum Q-factor of $6.3{\times}10^3$. These results compare favorably with those obtained by other researchers.

• 한국통신학회논문지
• /
• 제22권1호
• /
• pp.89-95
• /
• 1997

X-cut y-propagation $LiNbO_{3}$ 광변조기를 해석하고, 광대역 변조특성을 얻기 위한 설계조건을 구한다. 먼저, 구성된 전극에 대하여 최대 변조효율을 얻기 위한 광도파로의 최적위치를 찾고, 다양한 설계조건에 따른 구동전압, 특성 임피던스, M/W 변조파 유효굴절율을 계산하였으며, 이와 같은 수치적 해석을 위해 유한요소법(FEM: Finite Element Method)을 사용하였다. 그리고 사용된 설계 틀의 유용성을 확인하기 위하여 Becker의 결과와 비교평가 하였다. 본 논문에서는 ridge형 도파로구조의 x-cut $LiNbO_{3}$ 광변조기에 대한 다양한 계산을 통하여, 결과적으로 $1.3{\mu}{\textrm{m}}$의 광신호에 대하여 1.8 V.cm의 구동전압과 특성임피던스 $48.13{\Omega}$ M/W(microwave) 변조파 유효굴절율 2.168을 가치는 x-cut $LiNbO_{3}$ 광변조기를 설계하였다.

• 한국진공학회지
• /
• 제14권3호
• /
• pp.143-146
• /
• 2005

본 연구에서는 결맞는 x-선을 이용하여 표면의 거동 현상을 관찰할 수 있는 새로운 실험 방법인 x-선 상관 분광법(x-ray photon correlation spectroscopy)을 소개하고 이를 이용하여 측정한 고분자 박막에서의 거동 현상에 대한 결과를 보고하고자 한다. 이 방법은 파장이 짧은 x-선 영역에 동역학 광산란(dynamic light scattering) 원리를 적용하여 나노 스케일의 동역학 현상을 관찰할 수 있다. 또한 x-선 산란을 이용하므로 동역학 현상과 동시에 구조 특성을 측정할 수 있다. 본 논문에서는 글래스 전이보다 높은 온도에서, 기판에 코팅된 고분자 박막의 표면 거동현상을 온도와 파수의 함수로 측정하였다. 박막의 두께가 두꺼울 때에는 점성이 높은 액체에서와 계산된 이론에서와 같은 표면 거동 현상이 관찰되었고, 얇은 박막에서는 갇힘 현상에 의한 효과를 관찰하였다.

• 한국동물위생학회지
• /
• 제28권3호
• /
• pp.203-213
• /
• 2005

Oxytetracycline, tetracycline, chlortetracycline and doxycycline in honey were separated by solid phase extraction (SPE) and determined with high performance liquid chromatography (HPLC) with UV/Visible detector. Analysis was carried out using following conditions: XTerra $C_8$ column $(3.9\times150mm\;i.d. 5{\mu}m)$, mobile phase composed of 0.01M oxalic acid : methanol : acetonitrile (820 : 80 : 100, v/v/v), isocratic pump at a flow rate of 0.9 ml/min. and $50{\mu}l$ of injection volume, UV/Visible detector with wavelength of 360nm. The calibration curves of four tetracyclines showed linearity $(\gamma^2>0.999)$ at concentration range of $100\~1,000 ng/ml$. The recoveries in fortified honey represented more than $70\%$ with low coefficient of variation $(<10\%)$ for concentration range of four tetracyclines. The detection limits for oxytetracycline, tetracycline, chlortetracycline and doxycycline were 13.8, 14.6, 26.2 and 24.9ng/g in acacia honey. respectively. We also monitored tetracyclines residue in domestic honey [n : 38, acacia (20), wild flower (18) ] and foreign honey [n=22, legally distributed (13), illegally distributed (9)] using modified Charm II screening and HPLC confirmation methods. Seven of the 60 samples $(11.7\%)$ were suspect positive using modified Charm II screening test. Chlortetracycline residue was found in one foreign honey (illegally distributed) tested at concentrations of 0.22 ppm. Conclusively, for more effective control of tetracyclines used in beekeeping should be further survey for residues in honey and also national guidelines (maximum residue limit : MRL) and methods should be obligatory.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권2호
• /
• pp.47-49
• /
• 2000

We report on the fabrication and characterization of InGaN/GaN multiple quantum well light emitting diode (LED) with a highly transparent Pt ohmic contact as a current spreading layer. The value of light transmittance of a Pt thin film with a thickness of 8 m on p-GaN was measured to be 85% at 450nm. The peak wavelength and the full-width at half-maximum (FWHM) of the emission spectrum of the LED at 20 mA were 453 m and 23 m, respectively. Pt-contacted LEDs show good electrical properties and high light-output efficiency compared to Ni/Au-contacted ones. These results suggest that a Pt thin film can be used as an effective current spreading layer with high light-transparency.

• Journal of Biosystems Engineering
• /
• 제42권4호
• /
• pp.301-313
• /
• 2017

Purpose: This study was conducted to discriminate between normal hulled barley and Fusarium (Fusarium asiaticum and Fusarium graminearum) infected hulled barley by using the near-infrared spectroscopy (NIRS) technique. Methods: Fusarium asiaticum and Fusarium graminearum were artificially inoculated in hulled barley and the reflectance spectrum of the barley spike was obtained by using a near-infrared spectral sensor with wavelength band in the range 1,175-2,170 nm. After obtaining the spectrum of the specimen, the hulled barley was cultivated in a greenhouse and visually inspected for infections. Results: From a partial least squares discriminant analysis (PLS-DA) prediction model developed from the raw spectrum data of the hulled barley, the discrimination accuracy for the normal and infected hulled barley was 99.82% (563/564) and 100% (672/672), respectively. Conclusions: NIRS is effective as a quick and nondestructive method to detect whether hulled barley has been infected with Fusarium. Further, it expected that NIRS will be able to detect Fusarium infections in other grains as well.

• 한국의류학회지
• /
• 제35권2호
• /
• pp.218-229
• /
• 2011

Dyeing properties of cotton and ramie fabrics with pine needles colorants were studied by investigating the analysis of pine needles colorants, the effect of dyeing conditions (such as dye concentration, dyeing temperatures and times on dye uptakes), effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use; in addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were estimated. In the UV-Visible spectrum, the wavelength of the maximum absorption for pine needles extract was 285nm, and pine needles colorants produced a yellow color. From FT-IR and GC-MS results, it was assumed that chromophoric substance from pine needles extracts were mixed with flavonol tannin and flavanol tannin. An increased dyeing concentration resulted in a larger dye uptake and a Freundlich absorption isotherm was obtained. A larger dye uptake occurred as the dyeing time and temperature increased. Post-mordanting was more effective than pre-mordanting and the dye uptake of fabrics improved by mordanting. The colorfastness of dyed fabrics showed a low rating; however, colorfastness to washing and dry cleaning of cotton fabrics mordanted with N.Cu, and friction fastness of ramie fabric mordanted with Cu improved. The dyed fabrics showed very good antimicrobial abilities of 99.9%. In addition, the ultraviolet-cut ability and deodorant ability improved in fabrics dyed with pine needles extracts.

• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2000년도 국제심포지엄 및 제26차 추계학술발표회
• /
• pp.1-14
• /
• 2000

The Near Infrared region of the energy spectrum was first discovered by Hershel in the year 1800. The principles of NIR is based on light absorption of specific organic chemical bonds. The absorption at each wavelength is measured and a spectre is obtained. The spectre is then treated mathematically and with the absorption data is converted to absolute units via a calibration. In the last two decades it has developed dramatically. With the invention of computers and the ability to treat a large amount of data in a very short time the use of NIR for many different purposes has developed very fast. During the last decade with the aid of very powerful PC's the application of NIR technology has become even more widespread. Now or days development of very robust calibrations can be done in a relatively short time with a minimum of resources. The use of Near Infrared Spectroscopy (NIR) in the Meat industry is relatively new. The first installations were taken into operation in the 80ties. The Meat Industry in often referred to as rather conservative and slow to embrace new technologies, they stay with the old and proven methods. The first NIR instruments used by the Meat Industry, and most other industries, were multipurpose build, which means that the sample presentation was not well suited to this particular application, or many other applications for that sake. As the Meat Industry grows and develops to meet the demands of the modern markets, they realise the need for better control of processes and final products. From the early 90 ties and onward the demand for 'rear time' rapid results starts growing, and some suppliers of NIR instruments (and instruments based on other technologies, like X-ray) start to develop and manufacture instrumentation dedicated to the particular needs of the Meat Industry. Today it is estimated that there are approximately 2000 rapid instruments placed in the Meat industry world-wide. By far most of these are used as at-line or laboratory installations, but the trend and need is moving towards real on-line or in-line solutions. NIR is the most cost effective and reproducible analytical procedure available for the twenty first century.

• 한국통신학회논문지
• /
• 제29권6B호
• /
• pp.538-547
• /
• 2004

버스트 제어 정보와 버스트를 offset 시간으로 분리하여 전송하는 광 버스트 스위칭 망에서 버스트 충돌 발생은 서비스 품질 저하를 초래하며 이러한 현상은 버스트 크기가 클수록 더욱더 심각해진다. 그러므로 노드에서 버스트 충돌 방지를 위한 효과적인 예방 대책이 반드시 수립되어야 한다. 그러나 현재 광 버스트 스위칭 망에서 제시되고 있는 버스트 충돌에 대한 다양한 접근 방법들은 버스트 충돌 발생 후 이를 해결하기 위한 방안으로 제시되고 있다. 그러나 본 논문에서 제안한 기법은 Ingress 에지 노드에서 부 반송파 다중화 기술을 이용하여 버스트 전송 크기를 줄임으로써 코어 망에서 스케줄링 시 발생할 수 있는 버스트 충돌 확률을 미리 예방하는 방법이다. 이를 위해 본 논문에서는 부 반송파 다중화 기한의 광 버스트 스위칭 망에서 버스트 생성과 전송을 위한 모듈구조와 기법을 제안하였다. 또한, 제안된 기법에 대해 파장 개수와 부 반송파 개수에 따른 버스트 손실률, 처리율 및 총 용량 관점에서 성능 평가를 실시하였다.

• 한국전자파학회논문지
• /
• 제15권6호
• /
• pp.619-626
• /
• 2004

채널 간격이 100 ㎓로 일정하고 채널 비트율이 40 Gbps인 16-채널 WDM 시스템에 MSSI(Mid-Span Spectral Inversion) 기법을 적용한 경우의 4-광파 혼합(FWM: Four-Wave Mixing)에 의해 왜곡된 채널 신호의 보상 특성을 살펴보았다. MSSl를 통한 광대역 보상을 위해 광 위상 공액기(OPC: Optical Phase Conjugator)의 비선형 매질로 HNL-DSF(Highly-Nonlinear Dispersion Shifted Fiber)를 사용하였다. 우선 MSSI 기법을 이용하면 FWM에 의한 채널 간섭의 영향을 모든 채널에 걸쳐 특정 입력 전력 범위 내에서 비슷한 특성으로 줄일 수 있다는 것을 확인할 수 있었다. 그러나 OPC에 의해 생성되는 공액파 전력이 입력 신호파 전력에 비해 작은 장파장 채널들은 광섬유의 분산 계수가 커질수록 보상의 정도가 줄어드는 것도 알 수 있었다. 즉 분산 계수가 비교적 적은 광섬유를 통해 채널 간격이 일정한 WDM 채널들을 특정 전력 이내에서 양호한 품질로 전송하는데 HNL-DSF를 이용한 MSSI 보상 기법이 효과적이라는 것을 확인할 수 있었다.