• 한국지반공학회논문집
• /
• 제30권9호
• /
• pp.19-28
• /
• 2014

해성점토를 활용한 준설매립공사에서는 준설토의 거동분석이 선행되어야 한다. 본 연구에서는 침강압밀하는 준설토의 밀도와 간극비 변화를 관찰하기 위해 물리탐사기법을 적용하였다. 서해안에서 채취한 흙에 대한 기본물성시험을 실시하였고, 침강압밀시험기에 시료를 단계적으로 투기하여 시간에 따른 계면고와 탄성파의 변화를 관찰하였다. 흙의 침강압밀이 완료된 후 하방향의 투수시험을 실시하여 조간대의 영향이 준설토의 물리적 특성에 미치는 영향을 관찰하였다. 또한 초소형 전기저항탐침을 관입하여 깊이에 따른 시료의 전기비저항을 측정하였다. 모든 실험이 완료된 후, 시료를 채취하여 간극비를 계산하였다. 실험결과, ML 시료의 특성상 급격한 침강을 보여 침강압밀특성을 육안으로 관찰하기 어려웠으나, 단계투기가 계속될수록 탄성파의 속도는 증가하는 경향을 보였다. 하방향 투수에 따른 조간대 영향은 매우 적어 관찰할 수 없었다. 한편 탄성파 속도로 추정한 시료의 간극비는 단계투기에 따라 선형적으로 증가하는 경향을 나타내었다. 전기비저항으로부터 계산된 간극비는 깊이에 따라 반복적으로 증가, 감소하는 형태를 나타내었으며 이는 단계투기에 따라 층을 이루고 있는 시료의 영향으로 파악된다. 시료채취, 탄성파 속도, 그리고 전기비저항으로부터 구한 간극비를 비교한 결과, 서로 유사한 관계를 나타내었다. 본 연구는 물리탐사기법이 준설토의 간극비 관찰에 효과적으로 활용될 수 있음을 보여준다.

• 한국농공학회지
• /
• 제42권3호
• /
• pp.89-96
• /
• 2000

Most soft ground in the southern and western coasts in Korea consists of very compressible alluvial deposits. Four samples in these alluvial deposite were selected to manifest the constitutive relations of consolidation. A series of tests were performed to investigate void ratio -effective stress relationand void ratio-coefficient of permeability relation on soil samples obtained at Haenam. Jindo Mankyung and Janghung permeabilities by CRS thoery were similar to directly measured data but those of indirectly computed by $C\upsilon$ shows difference. Several models about compressibility and permeability were compared with test data.

• 농업과학연구
• /
• 제37권3호
• /
• pp.491-499
• /
• 2010

This study was carried out to investigate the consolidation characteristics of the remolded clay by the oedometer and the constant rate of strain(CRS) consolidation tests. As the rate of strain increases, the settlement rapidly decreased. As the ratio of the sand in the specimen increases, its effect on the rate of strain to the settlement was reduced. As the effective stress increased, the void ratio decreased, while the rate of strain increased, it did not show a clear variation. The reduction of the void ratio was shown to be less than the oedometer test. The coefficient of vertical consolidation with effective stress showed very large variation around preconsolidation stress, but the rate of strain did not provide significant effects. The rate of strain with effective stress gradually decreased at all tests and mixed ratio of sand. The rate of strain at the constant rate of strain tests showed smaller than in the oedometer test. The coefficient of consolidation at the constant rate of strain tests showed much more increase than in the oedometer test. The ratio of the vertical coefficient of consolidation by the odometer and the constant rate of strain tests showed a large difference according to various tests method and mixing ratio. Therefore, it is recommended that careful attention should be paid to designing the soft ground improvement.

• 한국지반공학회논문집
• /
• 제30권4호
• /
• pp.101-106
• /
• 2014

관입시험은 한정된 범위에서 1차원적 정보를 얻을 수 있으나, N치는 다양한 지반설계정수와 실험적으로 연관되어 있다. 탄성파를 이용한 비파괴 검사는 역산 과정을 통해 비용 및 시간에 효율적으로 2차원 및 3차원 물성에 대한 지도를 얻을 수 있으며, N치와 탄성파 속도는 간극비, 포화도, 유효응력 등에 의해 좌우된다. 따라서 N치와 탄성파 속도간의 경험적 관계들이 제안되어 왔다. 본 연구는 다양한 간극비와 포화도를 갖는 주문진사에 대해 정지토압조건에서 탄성파를 실험적으로 측정하였다. 그 결과 하중 조건이 간극비 및 포화도에 비하여 가장 영향을 주는 요소로 나타났으며, 간극비와 포화도는 응력-속도 관계의 경향에 영향을 주었다. 각 영향인자간의 관계를 다중회귀분석을 통해 상관식으로 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.940-945
• /
• 1998

In this paper, we obtained the data, which is required in training the neural network and diagnosing the degradation degree, by introducing the AE detection that is effective method in ordinary degradation diagnosis on activation. Aa the results of generalization tests by appling neural network to the unknown AE patterns obtained from two kinds of specimen, firstly as to evaluate an objective performance of neural network, the recognition ration for no-void specimen and 1[mm] -void specimen are appeared to be 98.9% and 92.5%, respectively. Also, in the evaluation of the adaptability of neural network with a new type of 0.2[mm] -void specimen, it is confirmed that the result appears to be 64% of recognition ratio at 94% of confidence interval coefficient in expectation output 0.2. On the other hand, the recognition capability of the neural network was confirmed by data from no-void and 1[mm] void specimen. The results prove the promising possibility of the application of ANN to discriminate specific void affecting as main degradation source at partial discharge condition in insulator containing multi-void by accummulated data base.

• 산업기술연구
• /
• 제21권A호
• /
• pp.317-327
• /
• 2001

For soils with high void ratios, the inverse method of utilizing results obtained from centrifuge model test was used to find the constitutive relation of effective stress - void ratio - permeability whereas conventional oedometer test and constant rate of strain consolidation test were also used to fine its relation at ranges of relatively low void ratio. Results of column test about settlement of interface and pore pressure and distribution with time were compared with numerically estimated values to confirm such a constitutive relation as obtained from the inverse method. Consolidational settlement in dredged and reclaimed ground, where the consolidation was in progress, was predicted by using the numerical technique implemented with the finite strain consolidation theory.

• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.713-723
• /
• 2016

Shear wave velocities of three selected sandy soils subject to drained triaxial compression test were continuously measured using the bender elements. The shear wave velocity during isotropic compression, as widely recognized, increased as confining pressure increased and they were correlated well. However, during drained shearing, the mean effective stress could no further provide a suitable correlation. The shear wave velocity during this stage was almost constant with respect to the mean effective stress. The vertical stress was found to be more favorable at this stage (since confining stress was kept constant). When sample was attained its peak stress, the shear wave velocity reduced and deviated from the previously existed trend line. This was probably caused by the non-uniformity induced by the formation of shear band. Subsequently, void ratios computed based on external measurements could not provide reasonable fitting to the initial stage of post-peak shear wave velocity. At very large strain levels after shear band formation, the digital images revealed that sample may internally re-arrange itself to be in a more uniform loose stage. This final stage void ratio estimated based on the proposed correlation derived during pre-peak state was close to the value of the maximum void ratio.

• 한국농공학회지
• /
• 제17권3호
• /
• pp.3833-3839
• /
• 1975

The object of this experiment is to find out some flow characteristics of water through sand layer, to prevent moving sands in the filters of the fill Dam, infiltration gallery, well and Deversion Weir. This experiment was accomplished with different particle Sizes of Six Samples and different hydraulic gradient. The results obtained are Summarized as follows. 1. The critical hydraulic gradients for laminar flow was found to be between 1 and 2 when the sand used had the effective diameter, D10 of between 0.18cm and 0.45cm. 2. The critical hydraulic gradients for different particle sizes of sands were varied considerably. 3. There was a negative correlation between critical hydraulic gradient and critical Velocity, and between effective particle diameter D10 and critical hydraulic gradient respectively. 4. In spite of relatively small variation of void ratio of sands used, the values of the coefficient of permeability varied considerably. There was a negative correlation between coefficient of permeability and void ratio.

• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1877-1889
• /
• 1992

본 연구에서는 업셋팅의 변형해석 및 온도해석(열전달 해석)을 비연계 방식으 로 동시에 해석하고 실제 공정에 가깝게 접근하는 축대칭 열점소성 유한요소 프로그램 을 이용하여, 시뮬레이션에 의해 공정을 해석하여 불량감소 및 원가절감을 위해 단조 공정을 개선하는 것이다. 업셋팅공정의 연구에 있어서는 대형강괴의 주 불량요인인 기공의 소멸을 위한 공정방안을 연구하는데 있다.

• Geomechanics and Engineering
• /
• 제24권3호
• /
• pp.295-305
• /
• 2021

In this study, design charts for estimating consolidation settlement are proposed according to finite strain consolidation theory using a nonlinear constitutive relationship equation. Results of parametric sensitivity analysis shows that the final settlement, initial height, and initial void ratio exerted the greatest effect, and the coefficients of the void ratio-effective-stress. Proposed design charts were analyzed for three regions using a representative constitutive relationship equation that enables major dredged-reclaimed construction sites in Korea. The regional design charts can be calculated accurately for the final settlement because it is applied directly to the numerical analysis results, except for reading errors. A general design chart applicable to all marine clays is proposed through correlation analysis of the main parameters. A final self-weight consolidation settlement with various initial void ratios and initial height conditions should be estimated easily using the general design chart and constitutive relationship. The estimated final settlement using the general design chart is similar to the results of numerical analysis obtained using finite strain consolidation theory. Under an overburden pressure condition, design charts for estimating consolidation settlement are proposed for three regions in Korea.