• 분석과학
• /
• 제21권3호
• /
• pp.159-166
• /
• 2008

본 연구에서는 water/oil 유화연료를 제조하여 제조된 연료의 점도, 밀도, 최적의 조사시간, 유화 안정성 등의 유화연료 특성 및 배기배출물 특성인 NOx, THC, CO의 농도와 smoke density를 측정하였다. 유화연료는 경유, 물, 유화제를 첨가한 후 homogenizer와 초음파 발생장치를 일정시간 조사하여 제조하였고, 배출가스 시험은 2476 cc diesel engine을 사용하여 engine dinamo meter로 실험하였다. 유화연료에서 함수율이 증가할수록 밀도가 증가하였으며, 점도는 함수율 60%까지는 W/O type이 형성되어 증가하다가 70%에서는 O/W type이 형성되어 감소하였다. 배출가스 시험결과 함수율이 증가할수록 NOx 농도와 smoke density는 감소하고, THC와 CO 농도는 증가하였다. 출력감소 시험 결과 함수율이 증가할수록 배출온도와 출력이 감소하였다. 위의 결과로부터 압축착화 디젤기관에 유화연료를 사용하는 것은 NOx와 smoke를 제거하는 효과적인 방법이라고 사료되어진다.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.141-155
• /
• 2000

To examine how the difference of molecular weight distribution of cellulase influenced the beating process according to surface pore size of the fiber, high molecular weight enzyme and low one were applied to soft wood pulp, hard wood pulp, cotton linter pulp. Some enzymes with the distribution of low molecular weight penetrated into cellulose in the proportion of surface pore size and the results were negative as like : the low viscosity, decrease of refining Yield, decrease of fine fibers content and so on. But in cotton linter pulp in the small surface area, the fiber softness was increased and it had a positive result that the paper intensity was high. Other enzymes with the distribution of high molecular weight had an enzyme reaction on the most surfaces of cellulose. They were effective in eliminating the fuzz of hydrophile fine fibers and the freeness was increased.

• 대한기계학회논문집B
• /
• 제21권3호
• /
• pp.445-456
• /
• 1997

Continuous casting process is numerically analyzed using the continuum model in a non-orthogonal coordinate system. Flow damping in the mush is modeled by combining the viscosity dependence on liquid fraction in dilute mush and the permeability dependence on liquid fraction in concentrated mush. The effect of turbulence is indirectly considered by effective diffusivity determined elsewhere by experiment. The main objective is to investigate the effects of casting parameters such as casting speed and tundish superheat on the distribution of surface temperature, shell thickness, metallurgical length and centerline segregation. Some of the computed results are compared with available experiments, and reasonable agreements are obtained.

• 동아시아식생활학회지
• /
• 제11권4호
• /
• pp.281-288
• /
• 2001

The autoclave method and the traditional cooking method were compared for nutrients(especially, minerals), color difference, viscosity, reduction of sugar and amino nitrogen content of brown stock. The autoclave cooking method is better than the traditional cooking method for retaining protein and amino nitrogen contents, as well as for reducing sugar content. Also, reducing sugar content increased by the autoclave cooking method. Since the color of brown sauce was related with the reducing sugar content, the autoclave cooking method was more effective than the traditional cooking method for the color development of brown stock. Since the autoclave method can reduce the cooking time without a loss of quality in brown stock, the autoclave method is a viable alternative to the traditional method of preparing brown stock.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.131-137
• /
• 1999

Under magnetism , as the magneticfluid is being itself magnetized, increase the apparent viscosity because of its body force and has the magnetic characteristics in response ot magnetism, the magnetic fluid is getting attention in various field. The magnetic fluid has the fluidity, which is a special characteristics of fluid and the magneticism , which is a special one of solid. Using this characteristics, this study has been proceeded to show the basic data for developing of a viscous damper with magnetism fluid as hydraulic fluid. Experimental study shows that the application of magnetic field is effective reducing the resonance characteristics of the spring-mass system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 가을 학술발표회 논문집
• /
• pp.100-105
• /
• 1992

While there are many researches in high-strength concrete recently, average strength required is the level of 400kg/$\textrm{cm}^2$ 28days compressive strength yet. For the effective using of high strength concrete, high strength concrete of 600 to 800kg/$\textrm{cm}^2$ 28days compressive strength must be accepted, But in this high strength concrete, due to much cement content, there are the problems of high hydration heat, high viscosity and economical efficiency. To solve these problems, it is suggested the method that replacement some of cement content as flyash up-to-dately. Therefore, the aim of this study is to develop high strength concrete of 800kg/$\textrm{cm}^2$ 28days compressive strength containing fly ash. This paper is the part I that analyze the testing results of fresh concrete in various aspects.

• 대한조선학회지
• /
• 제27권2호
• /
• pp.13-20
• /
• 1990

선미 반류중에 놓인 스테이터에 의하여 유기되는 속도성분을 전단유동일 경우와 전단 유동이 아닌 경우에 대하여 다루었다. 스테이터 날개에 의한 속도 성분 계산에는 양력선 이론이 사용되었으며 전단성분은 반류성분이 반경의 로그 함수로 표시 가능한 선형의 평균 반류 분포에 대한 반경 방향의 기울기로 나타내었다. 그리고 기본이론은 점성이 없는 경우의 오일러 방정식에 기초를 두었다. 계산결과, 전단 유동의 영향은 허브에 가까울수록 커졌으며 반류의 불균일을 감소시키는데는 스테이터 날개에 피치를 분포하는 것이 가장 효과적이었다.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.823-828
• /
• 1994

Dispersion condition of Si3N4 powder in molten wax was established by comparing relative viscosity of mixture with 20 vol% solids loading, while the evaluation of compression-molded sample was demonstrated as an effective method for developing a binder system for injection molding. The best dispersion of Si3N4 powder in molten wax was achieved when Si3N4 powder was treated with 5% stearic acid, and the critical powder volume fraction was determined to be about 0.51 from density measurement of compression-molded samples. Samples containing polar secondary binder showed markedly improved green strength, higher thermal expansion and increased wicking rate in the early stage.

• 한국세라믹학회지
• /
• 제22권6호
• /
• pp.15-20
• /
• 1985

In the course of cement hydration it was found that the addition of polyvinyl alcohol(contracted as PVA. here after) only in the cement paste could more influence on the set-retardation the depression of heat evol-ution rate than that of montmorillonit only or PVA-montmorillonie intercalation complex (PMIC) due to the effective adsorption of PVA on cement particles. The improved mechanical strength by addition of montmorillonite and PMIC was observed remarkably up to 0.05wt% due to the decrease of macro-pores caused by lowed viscosity or the acceleration of hydration reaction.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.309-312
• /
• 2002

The polymer nanocomposites are attracting considerable attention on account of the characteristic properties of nanoparticles have extremely large surface area per a unit mass. Recentry, mica-type silicates like montmorillonite have received a good deal of attention as effective nano-reinforcemen(1), but actually some critical problems such as the difficulties of exfoliation and surface modification, the weak heat-resistance of modifier, and inferior processability due to the increase in melt viscosity have restricted the mass production and various applications of the nanocoposite. (omitted)