• Journal of Industrial Convergence
• /
• v.19 no.6
• /
• pp.81-91
• /
• 2021

This study was conducted to investigate the effect of ankle muscle strengthening exercise using BOSU ball and taping on static and dynamic plantar pressure in patients with hallux valgus. Subjects were 26 men and women in their twenties with hallux valgus, and they were randomly assigned to a taping group (TG; n=13) and an ankle strengthening group (ASG; n=13). Each group received the appropriate intervention over a total of 4 weeks, and static and dynamic plantar pressure were measured before and after the intervention. Independent T-test was performed to examine the difference in the amount of change between groups, and paired-sample T-test was performed to determine whether the difference between the pre-post values within the group was significant. The statistical significance level was set as α=.05. As for the ratio of the total body weight of the foot (Foot), the amount of change in the ASG of the left foot was significantly decreased compared to the TG within the group (p<.05). Significantly increased (p<.05). As for the degree of pronation of the foot (MP/change ratio), the amount of change in the TG of the right foot was significantly decreased compared to the ASG (p<.05), and in the force of the foot, the TG of the left foot was the amount of change within the group compared to the ASG. was significantly increased (p<.05), and in the group-to-group change, the amount of change in TG was significantly different than that of ASG (p<.05). Therefore, it can be considered that ankle strengthening exercise using bosu ball and taping are insufficient to give effective change to patients with hallux valgus.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.441-441
• /
• 2009

Dye-sensitized solar cells (DSSCs) have been widely investigated as a next-generation solar cell because of their simple fabrication process and low coats. The cells use a porous nanocrystalline TiO2 matrix coated with a sensitizer dye that acts as the light-harvesting element. The photo-exited dye injects electrons into the $TiO_2$ particles, and the oxide dye reacts with I- in the electrolyte in regenerative cycle that is completed by the reduction of $I_3^-$ at a platinum-coated counter electrode. Since $TiO_2$ porous film plays a key role in the enhancement of photoelectric conversion efficiency of DSSC, many scientists focus their researches on it. Especially, a high light-to-electricity conversion efficiency results from particle size and crystallographic phase, film porosity, surface structure, charge and surface area to volume ratio of porous $TiO_2$ electrodes, on which the dye can be sufficiently adsorbed. Effective treatment of the photoanode is important to improve DSSC performance. In this paper, to obtain properties of surface and dispersion as nitric acid treated $TiO_2$ photoelectrode was investigate. The photovoltaic characteristics of DSSCs based the electrode fabricated by nitric acid pre-treatment $TiO_2$ materials gave better performances on both of short circuit current density and open circuit voltage. We compare dispersion of $TiO_2$ nanoparticles before and after nitric acid treatment and measured Ti oxidized state from XPS. Low charge transfer resistance was obtained in nitric acid treated sample than that of untreated sample. The dye-sensitized solar cell based on the nitric acid treatment had open-circuit voltage of 0.71 V, a short-circuit current of 15.2 mAcm-2 and an energy conversion efficiency of 6.6 % under light intensity of $100\;mWcm^{-2}$. About 14 % increases in efficiency obtained when the $TiO_2$ electrode was treated by nitric acid.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.2
• /
• pp.1-16
• /
• 2017

This study was conducted to analyze the urban heat island(UHI) intensity of South Korea by using Moderate Resolution Imaging Spectroradiometer(MODIS) satellite imagery. For this purpose, the metropolitan area was spatially divided according to land cover classification into urban and non-urban land. From the analysis of land surface temperature(LST) in South Korea in the summer of 2009 which was calculated from MODIS satellite imagery it was determined that the highest temperature recorded nationwide was $36.0^{\circ}C$, lowest $16.2^{\circ}C$, and that the mean was $24.3^{\circ}C$, with a standard deviation of $2.4^{\circ}C$. In order to analyze UHI by cities and counties, UHI intensity was defined as the difference in average temperature between urban and non-urban land, and was calculated through RST1 and RST2. The RST1 calculation showed scattered distribution in areas of high UHI intensity, whereas the RST2 calculation showed that areas of high UHI intensity were concentrated around major cities. In order to find an effective method for analyzing UHI by cities and counties, analysis was conducted of the correlation between the urbanization ratio, number of tropical heat nights, and number of heat-wave days. Although UHI intensity derived through RST1 showed barely any correlation, that derived through RST2 showed significant correlation. The RST2 method is deemed as a more suitable analytical method for measuring the UHI of urban land in cities and counties across the country. In cities and counties with an urbanization ratio of < 20%, the rate of increase for UHI intensity in proportion to increases in urbanization ratio, was very high; whereas this rate gradually declined when the urbanization ratio was > 20%. With an increase of $1^{\circ}C$ in RST2 UHI intensity, the number of tropical heat nights and heat wave days was predicted to increase by approximately five and 0.5, respectively. These results can be used for reference when predicting the effects of increased urbanization on UHI intensity.

• Journal of the Korean Chemical Society
• /
• v.61 no.4
• /
• pp.143-150
• /
• 2017

Countercurrent oxidation process (COP) was developed and evaluated for treatment of highly concentrated PCB containing insulating oil. The PCB content in insulating oil taken from Haksanmetal company was found to be 1,512 ppm. The COP utilizes a self-sustained flame which propagates itself in a direction counter to the oxygen flow. The flame removes PCBs adsorbed in activated carbon and, at the same time, regenerates activated carbon. The flame temperature was determined from both mass loss of activated carbon and the relative ratio of CO and $CO_2$ exhausted during COP, and showed that its temperature lied in the range of $650-850^{\circ}C$. Removal efficiency of PCBs was achieved above 99.99% for 5% of insulating oil loaded activated carbon with 1 COP in weight ratio. Also, the same removal efficiency was acquired for 60% of insulating oil loaded activated carbon with three consecutive COP. In addition, specific surface area of activated carbon during COP was recovered to almost similar value of virgin activated carbon. It proved that the COP was much effective in removing high concentration of PCBs in insulating oil easily and affordably.

• Membrane Journal
• /
• v.21 no.2
• /
• pp.177-192
• /
• 2011

Hollow fiber membrane using CTA polymers were prepared by the phase separation method for the separation and purification of biogas and the hollow fiber gas separation membrane modules with the effective surface area of 0.17 $m^2$ were prepared. The pure gas permeation properties of membrane modules for methane, oxygen and carbon dioxide were measured. The permeance of $CO_2$ and $CH_4$were 0.46 GPU and 18.52 GPU, respectively, therefore, the high $CO_2$/$CH_4$ selectivity of 40.4 was obtained. The separation and purification test for 4 different simulated mixed gases were carried out after the pure gas test and the gas concentration and flux of the permeate at the various stage-cut were measured from the 1 stage, 2 stage, and 3 stage cascade of membrane modules. In the 1 stage test, the concentration of $CH_4$ increased as the increase of the stage-cut, while the $CH_4$ recovery efficiency ratio decreased. In the 2 stage test, the $CH_4$ recovery efficiency ratio increased compared to the 1 stage. The 3 stage test was employed to reduce the loss of $CH_4$ in biogas and the result showed less than 5% of $CH_4$ recovery loss.

• The Korean Journal of Mycology
• /
• v.14 no.2
• /
• pp.109-119
• /
• 1986

The correlations between environmental influences on microorganisms in soil and its effects on disease development in ginseng field were studied to obtain some useful data for increasing ginseng production and effective preventive measures against the root rot caused by soil-borne pathogens. The diseased replanted ginseng fields were selected as the diseased field and the healthy plot in first planted field selected as control in three major Korean ginseng producing areas such as Kumsan, Goesan and Poonggi. The physicochemical characteristics of the soil were analyzed and microorganisms susceptible for root rot of ginseng, such as Fusarium spp. and general fungi were investigated for their population density in various soil conditions. Correlations between soil microbial populations and environmental factors were investigated. The numbers of Fusarium spp. propagules were abundant in fall in both soil conditions. The numbers of Fusarium spp. were 1.9 to 2.6 times higher in replanted field than first planted field except Goesan area. Relative ratio of Fusarium spp. to total fungi propagules in replanted field was 1.6 times higher in replanted field than first planted field indicating higher numbers of Fusarium spp. distributed in replanted field of soil. The numbers of propagules of total fungi were increased in June and July and there was no sensitive variation according to the temperature. There was no significant difference in vertical distributions of total fungi according to soil depth, while the total fungi were abundant in the surface layer and $10{\sim}15\;cm$ layer. The contents of organic matter and phosphate in healthy field were somewhat high, and phosphate/organic matter ratio and Mg contents were high in diseased field. All of the soils showed a weak acidic pH of 4.5 to 5.7. Soil moisture contents were increased during winter season, but did not show any significant changes during the growing periods, showing 24.6% in healthy field and 19.5% in diseased field respectively. Soil temperature was the highest in July and August and the lowest in January and February.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.1
• /
• pp.27-40
• /
• 1997

The hydrogeochemical study on the 15 natural waters was carried out in the vicinity of tunnel excavation site of Donghae largely composed of granite and limestone. The water samples can be classified based on their chemical characteristics into two groups; waters draining in the granitic region(group 1) and the limestone region(group 2). This classification was also confirmed by statistical examination through cluster analysis, and the tunnel seepage waters collected at the same site appear to be included in group 1 and 2 by their sampling period, respectively. According to factor analysis, the waters of group 1 art mainly represented by the weathering of plagioclase to kaolinite and those of group 2 are characterized by the dissolution of calcite. Different properties of the tunnel seepage waters are thought to be resulted from the effective waterproofing processes conducted during the sampling interval to the surface and subsurface leakage zones at the granitic region, which contributed to the change of groundwater flow system. However both the tunnel seepage waters seem to have thermodynamically interacted with rock-forming minerals in their wallrocks. The mixing ratio of the waters from two groups and water-rock interactions are evaluated quantitatively for the tunnel seepage waters through the mass balance approach, and the results are identical with the previous conclusions in this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3260-3268
• /
• 2009

A test apparatus has been fabricated to simulate chemical effect on head loss through a strainer in a pressurized water reactor (PWR) containment water pool after a loss of coolant accident (LOCA). Tests were conducted under condition of same ratio of strainer surface area to water volume between the test appratus and the containment sump. A series of tests have been performed to investigate the effects of spray, existence of calcium-silicate with tri-sodium phosphate (TSP), and composition of materials. The results showed that head loss across the chemical bed with even a small amount of calcium-silicate insulation instantaneously increased as soon as TSP was added to the test solution. Also, the head loss across the test screen is strongly affected by spray duration and is increased rapidly at the early stage, because of high dissolution and precipitation of aluminum and zinc. After passivation of aluminum and zinc by corrosion, the head loss increase is much slowed down and is mainly induced by materials such as calcium, silicon, and magnesium leached from NUKONTM and concrete. Furthermore, it is newly found that the spay buffer agent, tri-sodium phosphate, to form protective coating on the aluminum surface and reduce aluminum leaching is not effective for a large amount of aluminum and a long spray.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1777-1787
• /
• 2000

The purpose of this study was to select an effective and economical alkali source for sulfur-utilizing autotrophic denitrification. Tests on acid neutralization and denitrification at various alkali/sulfur mixing ratios were performed for charcoal, briquette ashes, sea shell, and limestone. The results of the experiments showed that sea shell was the most effective alkali source because it could provide more surface area than limestone, and the optimal alkali/sulfur mixing ratio was 1/1(V/V). In a sulfur/sea shell packed bed reactor, the denitrification efficiency was above 90% up to a loading rate of 116 g $NO_3{^-}-N/m^3-day$. but the denitrification efficiency deteriorated to 48% at the loading rate of 145 g $NO_3{^-}-N/m^3-day$. The average $SO_4{^{2-}}$ generation per g of $NO_3{^-}-N$ removed was 7.02 g, which is lower than the theoretical value of 7.54 g. Denitrification and sulfate generation appeared to be a first-order and a zero-order reaction with a reaction rate constant of 0.146 /hr and -53.1 mg/L-hr, respectively. According to nitrogen mass balance, 71~109%, with an average of 90%, of the removed nitrogen was recovered as $N_2$ gas.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.1
• /
• pp.16-25
• /
• 2003

Manun Reservoir, located in Andong district has the capacity of 2 million tons in irrigation water supply with the drainage area of $23.8\;km^2$. Manun Reservoir is over fifty year old, and shallow in depth. The ratio of drainage area (DA) to reservoir surface area (SA) as an effective physical parameter on water quality was 56.1 and was higher than those of other agricultural reservoirs. The ratio of reservoir storage (ST) to SA in Manun Reservoir was 4.79, and the mean depth was below 8m. Both ratios of DS/SA, total area (TA)/ST and ST/SA in Manun Reservoir were relatively higher than those in other agricultural reservoir and natural lakes in Korea. These physical parameters in Manun Reservoir, however, had a eutropic potential significance. Average of COD, IN, and TP in Manun Reservoir were 11.1 mg/L 1.426 mg/L, 0.093 mg/L, respectively. In the inflow stream of Manun Reservoir, the TN ($1.426{\sim}3.809\;mg/L$) was higher than those in reservoir. Only Lyngbya spp. was dominant in phytoplankton for this study period and Gymnodinium spp., Peridinium spp., and Cryptomonas spp. were dominant in zooplankton. According to the Carlson's trophic status index, Mnnun Reservoir was eutrophic in 1996, 1997, and 1999, and hypertrophic in 1998.