• 콘크리트학회논문집
• /
• 제19권2호
• /
• pp.199-207
• /
• 2007

본 연구에서는 비접촉 겹침 이음에 대한 스트럿-타이 모델을 제시하여 유효 겹침 이음 길이(effective lap length, $l_p$)와 이음 강도에 영향을 주는 요인들을 분석하였다. 부착응력이 작용하여 이음 강도에 기여하는 유효 겹침 이음 길이는 전체 겹침 이음 길이보다 짧으며, 이음된 철근에 직각방향으로 배근된 횡보강량비$({\Phi})$와 (이음된 철근간 거리)/(겹침 이음 길이) 비$({\alpha})$의 영향을 받는다. 이음된 철근간 거리가 멀어질수록 동일 겹침 이음 길이에서 유효 겹침 이음 길이는 짧아지게 되어 이음 내력은 작아진다. (이음된 철근간 거리)/(겹침 이음 길이) 비$({\alpha})$가 유효 겹침 이음 길이 결정에 미치는 영향은 횡보강량비$({\Phi})$가 낮을수록 커지게 된다. 이것은 횡보강량비가 낮을수록 이음된 철근 사이에 존재하는 스트럿의 기울기가 커지므로, 이음된 철근 사이 거리가 유효 겹침 이음 길이 결정에 큰 영향을 주기 때문이다. 비접촉 겹침 이음에 대한 제안된 스트럿-타이 모델은 실제 힘의 흐름을 분석할 수 있어, 다양한 재료 및 기하학적 조건에 적합한 철근 상세 설계를 가능하게 한다. 기존 문헌의 실험에서 나타난 거동 특성과 횡보강량이 이음 강도에 미치는 영향을 제안된 스트럿-타이 모델을 이용하여 효과적으로 설명할 수 있으며, 25개 실험체에 대한 이음 강도를 변동계수 11.1% 범위 내에서 적절히 예측할 수 있었다.

• 한국전자거래학회지
• /
• 제1권2호
• /
• pp.49-76
• /
• 1996

An industrial process is a sequence of steps intended to perform a useful task in an industrial organization, and can be described using a model or a representation framework such as function model, information model, process flow model, etc. Many researchers, however, claim that, all those models from different perspectives are required to describe complex systems such as CIMS. Thus these perspectives should be put together to build an optimal system. And the need for interconnection or transformation among different view points has arisen for effective communications between system developers and easy propogation of local changes in a model. But it seems to be difficult to integrate such models into a unified framework as they describe different aspects of the system on different purposes. This study is an attempt to interconnect these different perspectives, and thereby to support conceptual design of systems in a more effective manner. A methodology to transform the IDEFO functional model into a process flow model is proposed. The validity of the proposed approach is tested by developing a prototye of a computer-assisted design system on the operation processes of FMS installed at Seoul National University - Automation and Systems Research Institute.

• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.1941-1945
• /
• 2005

To raises the possibility of designing effective inhibitors, 3D-QSAR for the inhibition of calcineurin-NFAT signaling by new N-(4-oxo-1(4H)-naphthalenylidene benzenesulfonamide derivatives as inhibitors of intracellular protein-protein interactions were studied using CoMFA and CoMSIA methodology. The three templates, N-(4-oxo-1(4H)-naphthalenylidene)benzenesulfonamide (A), benzenesulfonamide (B) and 4-oxo-1(4H)-naphthalenylidene (C) were selected to improve the statistic of the present 3D-QSAR models. The best models with combination of standard field in CoMFA, and steric field and electrostatic field in CoMSIA derived from the template, B and C, because most of the compounds tend not to be aligned in template A. From the based on the CoMFA and CoMSIA contour maps, the $R_1$ and $R_2$ groups on 4-oxo-1(4H) naphthalenylidene ring are steric favor. The ortho position on the benzenesulfonyl ring is steric disfavor and the meta position is steric favor. In addition, the oxygene atom of carbonyl group will have better inhibition activities as it has a negative charge favor. From these findings, we can conclude that the analyses of the contour maps provided insight into possible modification of molecules for effective inhibitiors.

• 정보교육학회논문지
• /
• 제9권3호
• /
• pp.407-416
• /
• 2005

컴퓨터 교육을 위한 교육방법의 논의는 학습자가 컴퓨터에 대한 지식과 기능을 효과적으로 습득하기 위해 요구되는 사항이다. 본 논문에서는 다양한 교수법 중 교사와 학습자간의 부담감을 줄이기 위해 STAD협동학습을 적용해 보았다. 그 결과 STAD협동학습 이론에 기초한 컴퓨터 실기 수업이 학생들의 ICT 정보수집 및 정보가공 능력 향상에 효과적인임을 알 수 있었다. 연구결과를 통해 도출된 수업모형은 컴퓨터 과의 수업모형 중 하나의 예시가 될 것이며, 앞으로 컴퓨터 교과의 효과적인 수업을 위한 더 많은 연구사례가 있어야 한다고 생각한다.

• International Journal of Concrete Structures and Materials
• /
• 제6권3호
• /
• pp.177-186
• /
• 2012

The temperature distributions of concrete structures strongly depend on the value of thermal conductivity of concrete. However, the thermal conductivity of concrete varies according to the composition of the constituents and the temperature and moisture conditions of concrete, which cause difficulty in accurately predicting the thermal conductivity value in concrete. For this reason, in this study, back-propagation neural network models on the basis of experimental values carried out by previous researchers have been utilized to effectively account for the influence of these variables. The neural networks were trained by 124 data sets with eleven parameters: nine concrete composition parameters (the ratio of water-cement, the percentage of fine and coarse aggregate, and the unit weight of water, cement, fine aggregate, coarse aggregate, fly ash and silica fume) and two concrete state parameters (the temperature and water content of concrete). Finally, the trained neural network models were evaluated by applying to other 28 measured values not included in the training of the neural networks. The result indicated that the proposed method using a back-propagation neural algorithm was effective at predicting the thermal conductivity of concrete.

• Wind and Structures
• /
• 제7권4호
• /
• pp.235-250
• /
• 2004

The current study reports the results of an experimental program conducted on a structure fitted with a liquid damper (TLD) and subjected to harmonic excitation. Screens were placed inside the TLD to achieve the required inherent damping. In the first part of the study, reduced scale models of the building-TLD systems were tested under two levels of excitation. The efficiency of the damper was assessed by evaluating the effective damping provided to the structure and comparing it to the optimum effective damping value, provided by a linear tuned mass damper (TMD). An extensive parametric study was then conducted for one of the three models by varying both the excitation amplitude and the tuning ratio, defined as the ratio of the TLD sloshing frequency to the natural frequency of the structure. The effectiveness and robustness of a TLD with screens were assessed. Results indicate that the TLD can be tuned to achieve a robust performance and that its efficiency is not significantly affected by the level of excitation. Finally, the equivalent amplitude dependent TMD model, developed in the companion paper is validated using the system test results.

• 한국안전학회지
• /
• 제24권5호
• /
• pp.63-68
• /
• 2009

The urgent VAI method development is required since "The Act of Physical Protection and Radiological Emergency that is established in 2003" requires an evaluation of physical threats in nuclear facilities and an establishment of physical protection in Korea. The VAI methodology is developed to (1) make a sabotage model by reusing existing fire/flooding/pipe break PSA models, (2) calculate MCSs and TEPSs, (3) select the most cost-effective TEPS among many TEPSs, (4) determine the compartments in a selected TEPS as vital areas, and (5) provide protection measures to the vital areas. The developed VAI methodology contains four steps, (1) collecting the internal level 1 PSA model and information, (2) developing the fire/flood/pipe rupture model based on level 1 PSA model, (3) integrating the fire/flood/pipe rupture model into the sabotage model by JSTAR, and (4) calculating MCSs and TEPS. The VAT process is performed through the VIPEX that was developed in KAERI. This methodology serves as a guide to develop a sabotage model by using existing internal and external PSA models. When this methodology is used to identify the vital areas, it provides the most cost-effective method to save the VAI and physical protection costs.

• 한국시뮬레이션학회논문지
• /
• 제3권1호
• /
• pp.151-165
• /
• 1994

Broadband network based on the Asynchronous Transfer Mode(ATM) concept are becoming the target technology for the emerging Broadband Integrated Services Digital Network(B-ISDN). Since B-ISDN is very complex and requites a great amount of investment, optimum design and performance analysis of such systems are very important. Simulation can be widely used to analyze and examine the broadband network behavior. However, for the complicated system like broadband networks it is extremely difficult and time-consuming to develop a complete model for simulation. In this paper, an object-oriented modeling approach for the broadband network simulation is presented for the effective and efficient modeling. Object-oriented approaches can provide a good structuring capability for complicated simulation models and facilitate the development of reusable and extensible simulation models. We have developed an object-oriented model which consists of object model and behavior model. In the object mode., the components of the broadband network and both constant bit rate(CBR) and variable bit rate(VBR) traffic types of call level, burst level, and cell level are modeled as object classes. In the behavior model, the dynamic features for each object class are represented using the state transition diagram. It has been shown by illustration that objectoriented modeling is an effective tool for modeling the complicated B-ISDN.

• 한국재료학회지
• /
• 제20권9호
• /
• pp.478-482
• /
• 2010

A series of molecular dynamic (MD), finite element (FE) and ab initio simulations are carried out to establish suitable modeling schemes for the continuum-based analysis of aluminum matrix nanocomposites reinforced with carbon nanotubes (CNTs). From a comparison of the MD with FE models and inferences based on bond structures and electron distributions, we propose that the effective thickness of a CNT wall for its continuum representation should be related to the graphitic inter-planar spacing of 3.4${\AA}$. We also show that shell element representation of a CNT structure in the FE models properly simulated the carbon-carbon covalent bonding and long-range interactions in terms of the load-displacement behaviors. Estimation of the effective interfacial elastic properties by ab initio simulations showed that the in-plane interfacial bond strength is negligibly weaker than the normal counterpart due to the nature of the weak secondary bonding at the CNT-Al interface. Therefore, we suggest that a third-phase solid element representation of the CNT-Al interface in nanocomposites is not physically meaningful and that spring or bar element representation of the weak interfacial bonding would be more appropriate as in the cases of polymer matrix counterparts. The possibility of treating the interface as a simply contacted phase boundary is also discussed.

• 한국통신학회논문지
• /
• 제18권5호
• /
• pp.746-756
• /
• 1993

위임 모델은 OSI 네트워크 관리 모델에서의 관리 정보 전송으로 인한 과도한 정보 전송을 줄임으로서 효율적인 네트워크 관리를 지원하고, 신뢰도를 높이기 위한 모델이다. 이 모델에서는 관리 스크립트를 작성하여 이의 수행을 피관리자에게 위임함으로서 관리자의 부담을 줄이려고 노력하였다. 따라서 스크립트의 효율적인 작성과 위임 등 여러가지 기능 필요하게 된다. 본 논문에서는 효율적인 네트워크 관리를 위한 관리 스크립트 언어를 설계하고, 인터프리터를 구현한다. 그리고 스크립트 관리를 위한 기능 및 이를 실현하기 위한 서비스를 정의하고, 관리자와 피관리자 모델과 알고리즘을 제시하여 ISODE를 이용하여 실험적인 구현을 통하여 그 기능을 확인한다.