• Land and Housing Review
• /
• v.2 no.3
• /
• pp.287-297
• /
• 2011

This paper presents the results of performance verification tests of the isolated flat plate apartment building with the laminated rubber bearings. The shaking table test is carried out in CABR(China Academy of Building Research) with two 1/10 scale isolation and non-isolation models under 4 excitation waves. The shaking table test is proceeding from x axis, y axis and x+y axis with different amplitude of acceleration values. The results show that, to non-isolated model, the natural vibration period is remarkably decreased and entered non-linear condition after moderate earthquake. Its accelerations become lager with increasing storey number and completely collapsed under large earthquake. The inter-storey shifts largely exceed the limit values of regulated displacement angles. But to isolated model, the natural vibration period of isolated modal is almost the same in all conditions and still in its elastic condition. The earthquake loading is greatly reduced and the accelerations of superstructure are greatly reduced. The inter-storey drifts are very small and can be neglected. The isolated model is in translational state and can be seen as a rigid whole. The displacements of isolation layer are in the allowable range. This experiment demonstrates that the seismic isolation is very effective to mitigate the influence of earthquake on structures and it is possible to increase the serviceability due to decrease the floor acceleration. facilities from their good states that is superior to non-isolated structure.

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.85-100
• /
• 2003

Today's computing system has expanded its application to business trade and distributed work transactions using the Internet. As the demand for more flexible, adaptable, extensible, and robust web-based enterprise, these application development has been gradually expanded based on reusable, independent, and portable components. Component Based Development (CBD) works by developing and evolving software from selected reusable software components and then assembling them within appropriate software architecture. However, it requires an increase in cost to build new components as well as the necessary effort to develop of the business requirement these components. Standardized component models are required as well from the perspective of systems in order to support rapid and exact component information transmission on the web. In this paper, we describe the e-Business Component Development with agent for rapid application development on the web that correspond to the demands of users in the business domain. We design and implement the specifications of e-business components by combining these demands. In order to improve the agent register and retrieval, we propose the intelligent search and register agents, which can conduct more precise searching and specializing for components. The system enables the locating of user's frequently used components through an agent involving register and retrieval, as well as rapid procedures for registers The e-BCOS (e-Business Component System) is the agent system for the user to register distributed components and to search for components Information. The e-BCOS increases reusability through the e-business component development of distributed components in the business domain. For the share and delivery, specification with XML is acceptable to user's variable order e-BCOS Includes the effective investment, timeliness, reliability, efficiency, and maintenance effort by with agent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.60-68
• /
• 2019

For effective building maintenance, the collection and management of various maintenance date such as work history information and material information is required. Despite the introduction of information management technologies and systems to reduce the amount of maintenance work of buildings, which have become larger and more complex, the maintenance information is not being utilized properly. As an alternative, research on the introduction and utilization of BIM is being conducted continuously. However, the BIM models generated at the design phase are not utilized in practice due to a lack of architectural maintenance information. This study proposed a COBie document prototype to support BIM-based smart maintenance tasks performed by building managers. In order to formalize various types of maintenance work procedures, a BIM-based maintenance process model is presented in two categories: inspection and maintenance. Among the BIM attribute data of the BIM model generated at the design phase, the parameters corresponding to the maintenance necessary information for each basic process are derived. Based on this, we proposed a COBie document prototype consisting of seven spreadsheets. The results of a case study confirmed that the KBIMS library-based BIM model created at the design phase without the maintenance information can be used at the maintenance phase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.286-299
• /
• 2017

The Korean performing arts has been facing stagnation due to oversupply, lack of effective distribution system, and insufficient business models. In order to overcome these difficulties, it is necessary to improve the efficiency and accuracy of marketing by using more objective market data, and to secure audience development and loyalty. This study considers the viewpoint that 'Big Data' could provide more general and accurate statistics and could ultimately promote tailoring services for performances. We examine the first case of Big Data analysis conducted by a credit card company as well as Big Data's characteristics, analytical techniques, and the theoretical background of performing arts consumer analysis. The purpose of this study is to identify the meaning and limitations of the analysis case on performing arts by Big Data and to overcome these limitations. As a result of the case study, incompleteness of credit card data for performance buyers, limits of verification of existing theory, low utilization, consumer propensity and limit of analysis of purchase driver were derived. In addition, as a solution to overcome these problems, it is possible to identify genre and performances, and to collect qualitative information, such as prospectors information, that can identify trends and purchase factors.combination with surveys, and purchase motives through mashups with social data. This research is ultimately the starting point of how the study of performing arts consumers should be done in the Big Data era and what changes should be sought. Based on our research results, we expect more concrete qualitative analysis cases for the development of audiences, and continue developing solutions for Big Data analysis and processing that accurately represent the performing arts market.

• Journal of Music and Human Behavior
• /
• v.12 no.1
• /
• pp.65-94
• /
• 2015

The number of theoretical orientations and approaches in music therapy has risen sharply. This development of new theories may contribute to the advancement of specific therapeutic techniques; however, it can also lead to increased confusion for consumers and professionals for clinical and practical reasons. Due to these concerns, therapists often debate questions such as the following: what is the most effective therapeutic approach, what is the most ethical and professional course of action when clients do not appear to benefit from therapy, and is it possible to integrate ideas and techniques from multiple frameworks and theories in order to better serve the client? This paper describes a new way of thinking for music therapists called Integral Thinking in Music Therapy (ITMT), proposed by Kenneth Bruscia as a comprehensive approach to addressing the clinical needs of the client. ITMT is a way of thinking that embraces existing models and theories, suggests when a particular approach is indicated with its own value, and helps us to move away from one-way thinking to a more comprehensive approach in order to better serve our clients. This article illustrates the basic premise and clinical application as well as a hypothetical application of ITMT based on an actual case study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.25-34
• /
• 1993

The long-term behavior, such as in excavation problems of weak medium, can be dealt with by the elasto-viscoplasticity models. In this paper, a combined formulation of elasto-viscoplasticity using boundary elements and finite elements without using internal cells is presented. The domain integral introduced due to the viscoplastic stresses is transformed into a boundary integral applying direct integration in cylindrical coordinates. The results of the developed boundary element analysis are compared with those from the explicit solution and from the finite element analysis. It is observed that the boundary element analysis without internal cells results in some error because of its deficiency in handling the nonlinearity in local stress concentration. Therefore, a coupled analysis of boundary elements and finite elements, in which finite elements are used in the area of stress concentration, is developed. The coupled method is applied to a time dependent inelastic problem with semi-infinite boundaries. It results in reasonable solution compared with other methods where relatively higher degree of freedoms are employed. Thus, it is concluded that the combined analysis may be used for such problems in the effective manner.

• Journal of Distribution Science
• /
• v.12 no.9
• /
• pp.113-123
• /
• 2014

Purpose - After Korea's Free Economic Zone (FEZ) system was launched in 2003, there have been many debates about upgrading it and its support systems. However, as of 2013, there were insufficient results. Further, upon the designation of the East Coast and Chungbuk as official FEZs from February 4, 2013 by the 56th the Commission, there is a concern that many people are in the area designated as FEZ 8. This study investigates Korea's new FEZ system as part of Korea's primary new economic development policy in the 21st century. Therefore, this study examines views on the weaknesses of the past ten years of FEZs so that Korea can expand its FEZ system. Research design, data, and methodology -Many countries have considered the FEZ as an economic special zone. By reviewing previous research models, this study provides an update using recent data and materials, until 2013, from the Center of Free Economic Zones. In previous studies, the lack of support systems was attributed to proposals to ensure operational autonomy and differentiation of each FEZ; however, the main cause cannot be solved through regulatory issues, as difficulties caused by the operational system are responsible for the problems. We wish to analyze the FEZ, specifically the operational system; this is the main issue of this study. Results - After the first FEZs were established, it became necessary to have basic plans, as investment results in 2013 compared to the same period this year led to lower earnings in the first half of 2014. We propose an improvement of the operational system because in the free economic zones, the operational system is the root cause of the underlying problem. The results of this research are as follows. The weak management of the FEZ system is influenced by weak investment, delayed development, foreigners' living facilities, benefits of foreign investments, the control tower's policy making decision process, quickness of the process of satisfying legal requirements, and support For the independence of FEZs. Conclusion - Local governments do not have legal rights over FEZ deregulation and investment industries. This study suggests that the local government should have more independence from the central government. Moreover, independent management committees are more effective for ensuring public rights, better employee responsibilities, and better-qualified personnel. The FEZ committee struggles to effectively manage the locations of FEZs, foreign investments, and related facilities under the control of the Ministry of Trade, Industry and Energy. Thus, the FEZ committee should be under either the Prime Minister's office or the Presidential committee, to control and effectively coordinate between the local and central governments. If the problem clearly applies to the operational system in 2013, it is necessary to provide materials and methods so that the results of the first half of 2014 can be computed despite the data limits and lack of resources, and the data can be analyzed in a more diachronic thesis.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.1
• /
• pp.67-79
• /
• 2013

For the sake of the Transit-Oriented Development that has been prominent recently, an analysis of the spatial structures of transit centers, above all, should be carried out at a local level. This study, thus, analyzes the spatial structures of subway influence areas by applying a Geographically Weighted Regression (GWR) model to individual parcels. As a result of the validity analysis of the model, it has turned out that the subway influence areas have different characteristics respectively, and there is spatial heterogeneity even in the same single area. Also, the result of the comparison among models has proved that the GWR model is more adequate than the Ordinary Least Square (OLS) model and $R^2$ has been also increased in the GWR model. Then, the results have been mapped by means of the GIS, which have made it possible to understand the spatial structures at a local level. If the Transit-Oriented Development is fulfilled in consideration of the spatial structural characteristics of the subway influence areas drawn respectively from the model analysis, it will be helpful in adopting effective policies.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.1
• /
• pp.7-12
• /
• 2014

The adsorption characteristics of Pb(II) and Cu(II) by the manganese oxide-coated activated carbon (MOAC) were investigated by series of batch experiments. MOAC was prepared by three types of manufacturing methods such as chemical precipitation method (CP), hydrothermal method (HT) and supercritical method (SC). Pseudo-second-order and Langmuir models adequately described kinetics and isotherm of Pb(II) and Cu(II) adsorption on the experimented adsorbents. These results indicated that heavy metal ions were chemically adsorbed onto uniform monolayered adsorption sites. The coating of manganese oxide enhanced the adsorption capacities of AC. And adsorption capacities of Pb(II) and Cu(II) were significantly affected by the manufacturing method of MOAC. The highest adsorption performance was obtained by using SC, followed by HT and CP, which is caused from high uniformity and amount of manganese oxide coated onto AC induced by high temperature and pressure. These results show that MOAC can be used as an effective adsorbent to remediate heavy metal contaminated environment.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.245-248
• /
• 1997

Operative interventions for the management of osteonecrosis of the femoral head (ONFH) include core drilling, with or without vascularized fibular bone grafting. Nevertheless, their clinical results have not been consistently satisfactory. Recently, a new surgical procedure that incorporates cementation with polymethylmethacrylate (PMMA) after core drilling has been tried clinically. In this study, a biomechanical analysis using a finite element method(FEM) was undertaken to evaluate surgical methods and their underlying surgical parameter. Our finite element models included five types. They were (1) normal model (Type I), (2) necrotic model (Type II), (3) core decompressed model (Type III). (4) fibular bone grafted model (Type IV), and (5) cemented with PMMA model (Type V). The geometric dimensions of the femur were based on digitized CT-scan data of a normal person. Various physiological loading conditions and surgical penetration depths by the core were used as mechanical variables to study their biomechanical contributions in stress transfer within the femoral head region. In addition. the peak von Mises stress(PVMS) within the necrotic cancellous bone of the femoral head was obtained. The fibular bone grafted method and cementation method provided optimal stress transfer behaviors. Here. substantial increase in the low stress level was observed when the penetration depth was extended to 0mm and 5mm from the subchondral region. Moreover, significant decrease in PVMS due to surgery was observed in the fibular bone grafted method and the cementation method when the penetration depths were extended up to 0 and 5mm from the subchondral region. The drop in PVMS was greater during toe-off than during heel-strike (57% vs. 28% in Type IV and 49% vs. 22% in Type V). Both the vascularized fibular bone grafting method (Type IV) and the new PMMA technique (Type V) appear to be very effective in providing good stress transfer and reducing the peak Von-Mises stress within the necrotic region. Overall results show that fibular bone grafting and cementation methods are quite similar. In light of above results, the new cementation method appears to be a promising surgical alternative or the treatment of ONFH. The use of PMMA for the core can be less prone to surgical complication as opposed to preparation of fibular bone graft and can achieve more immediate fixation between the core and the surrounding region.