• Geomechanics and Engineering
• /
• 제31권5호
• /
• pp.453-460
• /
• 2022

It is essential for geotechnical engineers to conduct studies and make predictions about the stability of slopes, since collapse of a slope may result in catastrophic events. The Gaussian process regression (GPR) approach was carried out for the purpose of predicting the factor of safety (FOS) of the slopes in the study that was presented here. The model makes use of a total of 327 slope cases from Iran, each of which has a unique combination of geometric and shear strength parameters that were analyzed by PLAXIS software in order to determine their FOS. The K-fold (K = 5) technique of cross-validation (CV) was used in order to conduct an analysis of the accuracy of the models' predictions. In conclusion, the GPR model showed excellent ability in the prediction of FOS of slope stability, with an R² value of 0.8355, RMSE value of 0.1372, and MAPE value of 6.6389%, respectively. According to the results of the sensitivity analysis, the characteristics (friction angle) and (unit weight) are, in descending order, the most effective, the next most effective, and the least effective parameters for determining slope stability.

• 디지털융복합연구
• /
• 제6권3호
• /
• pp.109-119
• /
• 2008

Although current RFID technology can provide wide advantages in food industry, most food companies do not consider widely adopting this technology yet. This paper presents analysis of how the effective implementation of RFID systems in food industry. To Measure the affecting factors, 19 items from Ketinger & Hackbarth, ABI Research, RFID Institutes and Researcher are selected. The validity and reliability of a questionnaire were examined through factor analysis and regression analysis was done by using the introduction of RFID systems and an achievement of ROI(Return On Investment) as dependent variables and the 4 factor scores from the factor analysis as independent variables. The results show that 2 factors are not only important in the introduction of RFID systems but also 3 factors also important for an achievements of ROI in particular.

• 한국전자거래학회지
• /
• 제4권2호
• /
• pp.59-79
• /
• 1999

In order to construct a successful electronic commerce system, three main essential factors must be satisfied to obtain the best effective outcomes. The three main essential factors are as follows : economic factor, effectiveness factor and convenient factor. In order to understand the role of these three factors, one must have some insight knowledge about security to assist him to implement these three factors in his construction of an electronic commerce system. This paper analyses a implementation mechanism of security systems based on the SET 1.0 standard for electronic commerce systems, thus providing an effective plan for the construction of a security system in the SET-based electronic commerce field. This paper helps to analyse the elements of security vulnerabilities in the SET 1.0 standard implementation and also helps to understand the SET 1.0 protocol.

• 건설안전기술
• /
• 통권51호
• /
• pp.93-105
• /
• 2010

The object of this study is to understand the psychological factor of the worker on safety and recommend experimental factor of safety education program. The following are the methods of this study. We analyzed the statistical data from survey to workers(N=139) about the psychological factor on safely. The survey consisted of 34 questions about 4 factors like private external characteristic, psychological characteristic, characteristics on behavior, and experience and reason of disaster. As the result of the analysis of the multi regression model on the base of correlation of each of the major factors, psychological health, effort on practicing, and satisfaction on their life were the variables with high influence on the safety mind of workers. So, it is good safety strategy for effective working to maintain healthy life with optimistic minds, and try to practice actively as usual. After considering the result, for the development of safety education program for working, we have to consider psychological factors of our workers that influence their safety and try to improve the experimental education opportunity, and it will be effective.

• 한국태양에너지학회 논문집
• /
• 제37권5호
• /
• pp.13-26
• /
• 2017

Solar power is expected to account for a considerable proportion of domestic renewable energy compared to other renewable energy sources. In this study, capacity credits, which are the most important factors for evaluating the effective capacity of photovoltaic power, are estimated by capacity factor-based approximation method. To do this, we use the data of solar power generation and capacity over many years and calculate the capacity factors of the domestic solar power. The results of the existing methods and ours proposed in this paper are compared and analyzed.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.109-116
• /
• 2019

This paper carried out numerical analysis for estimating the propulsion performance of the model scale ONRT benchmark model of'Tokyo 2015 a workshop on CFD'. The method reflecting the scale effect of ITTC'78 method and form factor were used to compare the estimates of the effective wake ratio of full-scale. The numerical calculation was performed with Siemens's Star-CCM+, compared with IIHR model tests and the numerical analysis results of other research institutes, showing good agreement. In the case of an open stern and twin skeg ship, the validity of the ITTC'78 method can be confirmed by assuming that the effective wake ratio estimated from the numerical analysis results of model scale is similar to the effective wake ratio of full-scale.

• 대한토목학회논문집
• /
• 제37권3호
• /
• pp.521-529
• /
• 2017

본 연구에서는 합성형교와는 다른 전단연결 상세를 가지는 콘크리트 비충전 강합성 바닥판의 유효폭을 수치적으로 분석하였다. 유효폭 산정 방법 및 위치, 작용하중 크기, 메인 베아링 바 간격-지간장비에 따른 콘크리트 비충전 강합성 바닥판의 유효폭을 평가하였다. 분석 결과 응력 형태를 사다리꼴로 이상화하여 유효폭을 산출하여도 실제 유효폭과 거의 동일한 것으로 분석되었다. 또한, 전단 강도 증가를 위해 적용된 전단홀 관통 철근이 유효폭을 증가 시키는 역할을 하는 것으로 나타났다. 메인 베아링 바 간격-지간장비에 따른 유효폭 분석 결과로부터 콘크리트 비충전강합성 바닥판의 유효폭비를 산출 할 수 있는 보정 계수를 제안하였다.

• 한국강구조학회 논문집
• /
• 제19권1호
• /
• pp.129-137
• /
• 2007

본 연구에서는 X-브레이싱 접합부의 경계조건에 따른 탄성 면외 좌굴하중 및 유효 좌굴길이 계수에 관한 연구를 수행하였다. X-브레이싱의 접합부는 연결방법에 따라 강접합 혹은 단순 연결로 가정할 수 있으며, 이러한 접합부의 경계 조건은 X-브레이싱의 좌굴하중에 영향을 미친다. 본 연구에서는 접합부의 경계 조건에 따른 X-브레이싱의 면외 유효 좌굴길이 계수들을 유도 하였으며, 면외 유효 좌굴계수들은 압축부재와 인장부재의 길이비 $L_P$/$L_T$, 인장력과 압축력의 비 T/P, 및 인장부재와 압축부재의 Euler 좌굴하중의 비 $P_{ET}$/$P_{EP}$의 함수로 나타났다. 이러한 연구결과는 기존 연구자들 및 유한요소해석결과와 비교 분석하여 그 타당성과 적용성을 검증하였다. 마지막으로 유도된 면외 유효 좌굴길이 계수들을 비교하여 접합부의 경계 조건이 X-브레이싱의 면외 좌굴하중에 미치는 영향을 분석하였다.

• Nuclear Engineering and Technology
• /
• 제18권2호
• /
• pp.78-84
• /
• 1986

일차섭동이론을 이용하여 물질밀도 감도 계수의 표현식을 유도하였다. Super-Phenix I 평형노심의 초기상태를 기준계로 택했으며 유효중배계수를 계의 응답함수로 정의했다. 볼츠만 연산자의 구성요 소인 물질밀도로 표현되는 핵연료의 농축도와 실효밀도를 입력변화로 선정했다. 위 계산을 수행하는데 전산코드시스템 (KAERI-26군 단면적 library/1DX/2DB/PERT-V)가 사용되었다. 핵연료 농축도의 유효증배계수에 대한 감도계수는 4.576로 계산되었으며, 핵연료 실효밀도의 감도 계수는 0.0756으로 계산되었다. 본 연구는 감도해석법이 대형전산코드를 이용한 직접반복계산법에 비해 계산시간의 단축과 아울러 많은 정보를 준다는 것을 보여준다.

• 한국산업보건학회지
• /
• 제29권2호
• /
• pp.167-175
• /
• 2019

Objectives: The purpose of this study was to evaluate airborne radon and thoron levels and estimate the effective doses of workers who made household goods and mattresses using monazite. Methods: Airborne radon and thoron concentrations were measured using continuous monitors (Rad7, Durridge Company Inc., USA). Radon and thoron concentrations in the air were converted to radon doses using the dose conversion factor recommended by the Nuclear Safety and Security Commission in Korea. External exposure to gamma rays was measured at the chest height of a worker from the source using real-time radiation instruments, a survey meter (RadiagemTM 2000, Canberra Industries, Inc., USA), and an ion chamber (OD-01 Hx, STEP Co., Germany). Results: When using monazite, the average concentration range of radon was $13.1-97.8Bq/m^3$ and thoron was $210.1-841.4Bq/m^3$. When monazite was not used, the average concentration range of radon was $2.6-10.8Bq/m^3$ and the maximum was $1.7-66.2Bq/m^3$. Since monazite has a higher content of thorium than uranium, the effects of thoron should be considered. The effective doses of radon and thoron as calculated by the dose conversion factor based on ICRP 115 were 0.26 mSv/yr and 0.76 mSv/yr, respectively, at their maximum values. The external radiation dose rate was $6.7{\mu}Sv/hr$ at chest height and the effective dose was 4.3 mSv/yr at the maximum. Conclusions: Regardless of the use of monazite, the total annual effective doses due to internal and external exposure were 0.03-4.42 mSv/yr. Exposures to levels higher than this value are indicated if dose conversion factors based on the recently published ICRP 137 are applied.