• Journal of Pharmacopuncture
• /
• v.21 no.2
• /
• pp.48-60
• /
• 2018

Objective: The aim of this study is to optimize the extraction of beneficial substance from Cudrania tricuspidata leaves grown at Jirisan Mountain in South Korea by three different solvents depending on extraction time and at different temperature. Methods: The total phenolic contents were determined by the method reported by $S{\acute{a}}nchez$-Moreno et al. The total flavonoid contents were analyzed by Slinkard and Singleton. The DPPH radical scavenging activity was determined according to the method reported by Blois Results: The extraction yield for each solvent is 9.05-14.1%, 2.17-5.67%, and 2.3-3.9% for D.W., ethanol, and hexane, respectively. The overall results were maximized for the extract obtained with D.W. for 5 min at $100^{\circ}C$. The average phenol contents were 77.11, 45.64, and 0.343 mg/g at $100^{\circ}C$ in water, $78^{\circ}C$ in ethanol, and $68^{\circ}C$ in hexane, respectively. The flavonoid contents were the highest in the materials extracted with D.W., and were increased with increasing temperature, regardless of the extraction solvents, whether water (green), polar organic ethanol, or nonpolar organic hexane. In the ethanol extract, the flavonoid contents are increased gradually from 5.66 mg/g to 7.73 mg/g. The total flavonoid contents were proportional to the concentrations of the water extracts, ranging from 4.14 mg/g to 48.89 mg/g. The antioxidative activities of the water-extracted compounds are generally increased with increasing temperature from 42.5% to 85.5%. Those of the hexane extracts are increased slowly from 3.79% to 8.8%, while those of ethanol extracts are increased from 29.8% to 47.4%. Conclusion: The extraction yields were dependent upon solvents for extraction as well as extraction time and the temperature. The optimal extraction time was 5 min and the extraction yields were increased with increasing temperature excepted hexane. Of the three tested extraction solvents, the greenest solvent of water shows excellent results, suggesting that water is among the most effective solvents for natural sample extractions for general medicinal, pharmaceutical, and food applications.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.1
• /
• pp.42-46
• /
• 2012

The ISO document of ISO/TC/190/SC3/WG11/N11 is a working draft of international standard (WD) dealing with analytical method for the determination of explosives and related compounds using high performance liquid chromatography. The scope of this WD covers the storage of samples, preparing test portion, extraction and instrumentation. The main purpose of this study was to improve the extraction conditions which were already adopted in the WD. For this purpose, mechanical shaking method could be corresponded up to 18 hours of ultrasonic bath extraction in the WD was tested. Methanol was also tested with the intention of being added as an extracting solvent other than acetonitrile in the WD. According to the results, 16 hours of mechanical shaking method showed statistically the same effectiveness as that of 18 hours of ultrasonic bath extraction. In case of extracting solvent, methanol also showed statistically the same extraction capability as acetonitrile for DNB, TNT, 2-A-DNT and 2,4-DNT. However, the recovery rate of TNB with methanol extraction was 40% higher than that of acetonitrile extraction. Through adding mechanical shaking method into committee draft (cf. the next stage draft of the WD during the process for making international standard), ISO standard of analyzing explosives and related compounds in soil would become more useful in dealing with huge number of field samples in the laboratory. In other aspect, adopting methanol as an alternative extracting solvent would be very effective in the terms of exchangeability with GC-ECD/MS method which is being developed by German experts.

• Mass Spectrometry Letters
• /
• v.15 no.1
• /
• pp.40-48
• /
• 2024

Capacity of the analytical/quantitative evaluation techniques to satisfy both qualitative and quantitative considerations for effective extraction of marigold oleoresins/xanthophylls and their potential as anti-mycotic and antioxidant activity was assessed. Accelerated solvent extraction (ASE), Soxhlet extraction (SE), Supercritical fluid extraction (SCFE), Cold extraction (CE), and ultrasonically assisted extraction (USE) techniques were evaluated for extraction of oleoresin/xanthophyll content from Tagetes erecta (Var. Pusa Narangi Genda) with respect to solvent consumption, extraction time, reproducibility, and yield. Followed by the antifungal and antioxidant activity evaluation. The overall yield of Tagetes oleoresin was higher in ASE (64.5 g/kg) followed by SE (57.3 g/kg), USE (50.7 g/kg), SCFE (45.3 g/kg) and CE (31.6 g/kg). The lutein esters represented more than 80% of the constituents. Further, xanthophyll/ lutein content in oleoresin was found to be quite higher in HPLC (r2 = 0.996) analysis than in the AOAC recommended UV spectrophotometer analysis. The oleoresin exhibited moderate antioxidant activity (DPPH assay) and antifungal activity against three phytopathogenic fungi. Based on the various parameters, the reproducibility of ASE was better (0.3-8.0%) than that of SE (0.5-12.9%), SCFE (0.2-9.4%), USE (0.3-12.4%) and CE (0.8-15.3%). ASE with (RSD 1.6%) is preferred being faster, reproducible, uses less solvent, robust and automation allows sequential extraction of the sample in less time.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.174-180
• /
• 2011

This study was conducted to investigate the optimum condition of extraction from fronds of Osmunda japonica to increase antioxidant compounds and antioxidant activity. Powder (1 g) of lyophilized fronds were mixed with three different solvents (MeOH, 80% EtOH and water). Extraction was carried out using not only by immersion (room temp.), heating ($60^{\circ}C$) and stirring (200 rpm) for 6 h, but also by sonication in 42 kHz ultrasonic bath for 15, 30 and 45 min. Extracts were filtered, and adjusted up to 50 mL to determine contents of soluble solids, total polyphenols and total flavonoids. Antioxidant capacity was measured by radical scavenging activity of 0.15 mM DPPH (2,2-diphenyl-1-picrylhydrazyl) and 7.4 mM ABTS [2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)] radical. Among the solvents, MeOH and 80% EtOH appeared to be effective for extraction. Extract obtained from sonication in MeOH for 15 min resulted high polyphenol contents (45.15 $mg{\cdot}g^{-1}$ db) and DPPH radical scavenging activity ($RC_{50}$= 0.35 $mg{\cdot}mL^{-1}$). The highest flavonoid contents was obtained from immersion or heating extraction with MeOH (38.10~38.10 $mg{\cdot}g^{-1}$ db). ABTS radical scavenging was high in same extraction with 80% EtOH ($RC_{50}$= 0.21~0.22 $mg{\cdot}mL^{-1}$). Altogether, our results indicate that the extraction using ultrasonic bath with MeOH as a solvent (for 15~30 minutes) was the most effective way not only for increasing various antioxidant activities but also for saving labor and time in case of fronds of Osmunda japonica.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.1-9
• /
• 2000

A new method, the external resistance method (ERM method), is proposed for accurate extraction of the gate bias-dependent effective channel carrier mobility (${\mu}_{eff}$) and separated parasitic source/drain resistances ($R_S$ and $R_D$) of n-channel MOSFET's. The proposed ERM method is applied to n-channel LDD MOSFETs with two different gate lengths ($W_m/L_m=30{\mu}m/0.6{\mu}m,\;30{\mu}m/1{\mu}m$) in the linear mode of current-voltage characteristics ($I_D-V_{GS},\;V_{DS}$). We also considered gate voltage dependence of separated $R_2$ and $R_D$ in the accurate modeling and extraction of effective channel carrier mobility. Good agreement of experimental data is observed in submicron n-channel LDD MOSFETs. Combining with capacitance-voltage characteristics, the ERM method is expected to be very useful for accurate and efficient extraction of ${\mu}_{eff},\;R_D,\;R_S$, and other characteristic parameters in both symmetric and asymmetric structure MOSFET's in which parasitic resistances are critical to the improvement of high speed performance and reliability.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.130-134
• /
• 2005

This study was conducted to investigate the effects of pretreatment and extraction methods on the water extraction yields of sugar, protein and phenolic compounds, and the antioxidative activity of extract from Ganoderma lucidum. The herb was ground, sifted, and treated for 10 min with microwave (2,450 MHz) and ultrasound (20 kHz), and then extracted by boiling underatmospheric pressure and pressured boiling. Particle size $(0.8\~2.4\;mm)$, extraction time (2 hr) and solvent/solid ratio (20:1) were selected as optimal conditions for extraction.. Microwave and ultrasound treatment increased the extraction yields of total sugar, protein and phenolic compounds and the radical scavenging activity of extract. In comparison with microwave treatment and ultrasound treatment, microwave treatment was more effective than that of ultrasound treatment. The yields of all three compounds and the radical scavenging activity of extract were higher in pressured boiling extraction than in boiling underatmospheric pressure. The results showed that microwave radiation and sonication prior to extraction, and pressured extraction could be utilized for improving the extraction efficiency of G. lucidum.

• Journal of Applied Biological Chemistry
• /
• v.56 no.3
• /
• pp.171-177
• /
• 2013

Efficient extraction of total proteins from soil microorganisms is tedious because of small quantity. In this regard, an improved method for extraction of whole cell proteins is developed from soil microorganisms, Saccharomyces cerevisiae and Pichia pastoris. of which the cell wall are very strong. Pretreatment with NH4OH prior to the final extraction using NaOH/SDS was tried under the basis that ammonium ion was possible to enhance the permeability and/or to weaken the yeast cell walls. The pre-treatment of yeast cells with NH4OH drastically enhanced the protein extraction when it was compared with control (without NH4OH pre-treatment). At the pre-treatment of 0.04 N NH4OH at pH 9.0, about 3 fold of proteins was obtained from p. pastoris. Ammonium hydroxide appears to penetrate into the yeast cell walls more readily at basic pH. The effect of NH4OH pretreatment was pH dependent. The methods developed in this experiment might be applicable for an effective extraction of yeast proteins for the purpose of biochemical studies, especially proteomic analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.172-182
• /
• 2014

Extraction is a necessary element in the bioconversion of lignocellulosics to fuels and chemicals. Although various forms of chemical pretreatment of cellulosic materials have been proposed, their effectiveness varies depending on the treatment conditions and substrate. In this study, mixed hardwood (MH) and loblolly pine (LP) were pretreated with dilute acid in a 100 mL accelerated solvent extraction (ASE) at the predetermined optimal conditions: temperature: $170^{\circ}C$, acid concentration: 0.5% (w/v), and reaction time: 2~64 min. This method was highly effective for extracting the hemicellulose fraction. Total xmg (defined as the sum of xylose, mannose, and galactose) can be extracted from milled MH and LP through pressurized dilute acid treatment in maximum yields of 12.6 g/L and 15.3 g/L, respectively, representing 60.5% and 70.4% of the maximum possible yields, respectively. The crystallinity index increased upon pretreatment, reflecting the removal of the amorphous portion of biomass. The crystalline structure of the cellulose in the biomass, however, was not changed by the ASE extraction process.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.60-66
• /
• 2011

Solvent extraction experiments were carried out to recover and separate Ru(III) from aqueous hydrochloric acid media using TBP and Cyanex923. The efficiency of the extraction was studied under various experimental conditions, such as concentration of HCl and NaCl, concentration of extractant in the organic phase and temperature. The extraction behavior of metal impurities, such as Pt, Bi, Sn, Fe, Pb and Cu in mixed solutions was examined. From the experimental studies, it was found that the Cyanex923 resulted in higher extraction percentage of Ru than TBP. However TBP was more effective for the separation of Ru and Pt, Bi, Sn in mixed solutions than Cyanex923.

• Journal of the Korean Dietetic Association
• /
• v.4 no.1
• /
• pp.14-19
• /
• 1998

This study was designed to investigate the role of onion as a natural antioxidant. Onion was distinguished as yellow onion peel and onion flesh. Onion samples were extracted with 5 different kinds of solvents such as water, 70% ethanol, 99.9%ethanol, 99.9% methanol, and 96% butanol in order to select optimal extraction solvents, In this part of study linoleic acid was used s an model system for the purpose of determining the antioxidant activities. The optimal extraction rate of various solvents containing onion samples was determined by measuring extraction yield, electron donating ability(EDA), thiobarbituric acid(TBA), and thiocyanate, which are common methods for measuring activity. As a result 70% ethanol was shown as the most effective solvent.