• Journal of information and communication convergence engineering
• /
• v.12 no.4
• /
• pp.199-207
• /
• 2014

A new cooperative MAC protocol called the busy tone cooperative medium access control (BT-COMAC) protocol is proposed to overcome the drawbacks and maximize the advantages of existing schemes. This scheme uses a new metric called decibel power to decide an appropriate helper node. Using received power strength is more efficient in selecting an appropriate helper node, especially in a densely populated network, than the effective transmission rates used in conventional schemes. All communication nodes in a communication service area are assumed to move independently. Two performance metrics are used: System throughput and channel access delay. A performance evaluation of the BT-COMAC protocol is conducted using a computer simulation over a slow fading wireless channel, and its performance results are compared with those of four existing schemes. The numerical results show that the BT-COMAC protocol improves the system throughput by approximately 15% as compared to the best existing scheme.

• Journal of Welding and Joining
• /
• v.11 no.4
• /
• pp.112-124
• /
• 1993

It has been reported that fatigue damage sometimes occurred at the stress concentrated and dynamic loaded structural members of bulk carrier. In this paper, studies on fatigue strength of hull structures are reviewed, and the program for evaluating fatigue strength is developed. And the fatigue crack initiation and propagation on the end part of cargo hold frame of bulk carrier were calculated by FEM stress analysis and the fatigue strength evaluation program. These method can be applied not only to the crack initiation life but also to crack propagation life for the hull structural members at the hull design stage and be effective as the guideline to prevent the crack initiation or to estimate the fatigue strength for repairing of the fatigue damaged structures of real ships.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.42
• /
• pp.87-98
• /
• 1997

product to assign objectives for target manufacturing cost on the basis of consumer's function envaluation. The principal purposes of the study include: to improve product differentiation for those products with major usability functions and to prepare effective steps of product concept formulation. Since scant research has been conducted toward the approach suggested above, this study suggests a new method using conjoint analysis for classifying goals of manufacturing costs based on customer's function evaluation. The ultimate goal of this study is to compare and check. The cost estimate for each structure, and eventually to decide target cost values to be reasonably understood by the R&D team.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.87-92
• /
• 2001

In this studies, joint time-frequency analysis techniques were applied to analyze ultrasonic signals in the degraded austenitic 316 stainless steels, to study the evolution of damage in these materials. It was demonstrated that the nonstationary characteristics of ultrasonic signals could be analyzed effectively by these methods. The WVD was more effective for analyzing the attenuation and frequency characteristics of the degraded materials through ultrasonic. It is indicated that the joint time-frequency analysis, WVD method, should also be useful in evaluating various damages and defects in structural members.

• Journal of Engineering Education Research
• /
• v.20 no.4
• /
• pp.28-37
• /
• 2017

The purpose of this study was to analyze the current status of team learning in engineering education. For this, literature review and survey were used. The survey was conducted with 16 professors and 627 students in engineering college. Based on the results, team should be organized in consideration of various characteristics and competencies for effective team learning activities in engineering education. And in the team learning operations, it is necessary to make the conditions for students to immerse in team learning through the activation of communication of team members, tightening management of free riding in team learning, and optimizing team learning period. It is necessary to use the team learning evaluation method in harmony with the team, individual and peer evaluation.

• Fire Science and Engineering
• /
• v.3 no.1
• /
• pp.19-28
• /
• 1989

It has been recognized that the escape facility planning is very important for effective evacuation of accupants on fire event. The ultimate goal of the escape facility planning is to evacuate occupants rapidly from building fires to the safe areas. In fire event, occupants usually gather, utilize and finally act upon information about state transient of building fire system, which is consisted of components of fire, building and accupant during the ralatively short period of the fire event. That is, occupants' egress behavior is largely dependent upon building fire system. Therefore, comprehensive study for the relationship between building fire system and occupants' egress behavior is needed. This study aims to suggest the pre -occupancy evaluation method of the life safety performance for the architectural design based on prediction of occupants' egress behavior during building fires with computer simulation.

• BMB Reports
• /
• v.35 no.5
• /
• pp.532-535
• /
• 2002

To establish a method to evaluate the quality of the printed microarray and DNA fragments' immobilization. The target gene fragments that were made with the restriction display PCR (RD-PCR) technique were printed on a superamine modified glass slide, then immobilized with UV cross-linking and heat. This chip was hybridized with universal primers that were labeled with cy3-dUTP, as well as cDNA that was labeled with cy3-dCTP, as the conventional protocol. Most of the target gene fragments on the chip showed positive signals, but the negative control showed no signal, and vice versa. We established a method that enables an effective evaluation of the quality of the microarrays.

• Toxicological Research
• /
• v.11 no.1
• /
• pp.69-75
• /
• 1995

The present study was carried out to establish several spermatotoxicity test methods. For this purpose we investigated following parameters in the fertility study of DA-125, a new anticancer agent, in rats: testicular spermatid counts, epididymal sperm counts, daily sperm production rate, sperm morphology, and serum testosterone concentration. Motility and velocity of sperms were also measured using non-treated rats. At 0.3 mg DA-125/kg, spermatids per 1g testis and daily sperm production rate per 1g testis were significantly decreased, when compared with those of control group. Several types of abnormal sperms, such as no head, pin head, double head, hook at wrong angle, no tail, and small sperm, were found in both treated and control groups at a low frequency. Serum testosterone concentration at 0.3 mg DA-125/kg was close to the control value. Sperm motility and velocity measured with non-treated rats were in a good agreement with the results of other investigators. In our study established spermatotoxicity test methods can be used as a tool not only for the close examination of the cause of drug- or chemical-induced infertility, but also for the effective evaluation of reproductive toxicity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.273-277
• /
• 2007

In case of the Hydraulic Turbine Dynamo operating for Waterpower Generation, it makes very huge and loud noises, and it influences bad effect physically as same as mentally to those people who are working inside of power plant, and brings the decline of an effective working efficiency. However, its evaluation method or measure about such noise reflects merely its physical attribute which is sensuous Loudness of the Noise itself, since the accumulation effect of Noise or the meaning connected with psychological response did not reflect, it is the actual state that a rational evaluation is unable to expect. Consequently, this Study has attempted to evaluate the Noise of Hydraulic Turbine Dynamo by analyzing the sound quality using Zwicker‘s Psychological Acoustic Parameter, after classification by its positions of the Noise occurring at Hydraulic Turbine Dynamo.

• Korean Journal of Materials Research
• /
• v.13 no.1
• /
• pp.53-58
• /
• 2003

For the rib materials in PDP(plasma display panel), an effective method to improve the mechanical properties is to form a composite material by reinforcing a glass matrix with rigid fillers, such as alumina and titania powders. In this study, two types of ribs with different volume percent of fillers and with different glass matrix were tested for hardness, Young's modulus with the Berkovich indentation. As a result, cracks appeared around at the load of 1345 mN for the dense type of rib, while porous one endured until 2427 mN without any crack formation. Young's modulus and hardness decreased at the range: 90∼65 GPa, 9∼4 GPa, respectively as a function of indent load. Thus, a new method with nanoindenter represents a possible evaluation method for mechanical properties of barrier ribs.