• Journal of Oral Medicine and Pain
• /
• 제41권2호
• /
• pp.61-71
• /
• 2016

Purpose: This study was designed to evaluate the comparison between the subjective and the objective evaluation of pain control effect in masticatory muscle pain depending on time and dose change. Methods: The patients were recruited to this study and diagnosed according to the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD). Experimental group were divided into three groups; saline injection group (n=10), morphine 1.5 mg injection group (n=10), and morphine 3.0 mg injection group (n=10). Evaluation list was the subjective pain evaluation (visual analogue scale, McGill pain questionnaire) and the objective pain evaluation (pressure pain threshold [PPT], pressure pain tolerance [PTO]). The subjective and the objective pain evaluation were performed at the times of just before injection, 10 minutes, 30 minutes, 1 hour, 24 hours, and 48 hours after injection. Then, data were statistically analyzed. Results: The results were as follows: 1) There is no statistically significant difference between the results of the subjective and the objective pain evaluation with regard to the short-term (within 1 hour) analgesic effect of morphine sulfate. 2) However, after 1 hour of injection, while the subjective pain evaluation score still decreased, the objective pain evaluation didn't show significant changes in PPT and PTO (1 hour, p<0.05; 24 hours, p<0.01; 48 hours, p<0.001). 3) In comparison to changes in the dose, the McGill pain questionnaire was the most statistically effective method among the subjective pain evaluations (1.5 mg, p<0.05; 3 mg, p<0.01). Conclusions: Therefore, it was revealed that the subjective pain evaluation was more effective to evaluate long-term pain control, and that the McGill pain questionnaire could be an effective way to evaluate pain control depending on dose changes. It requires further investigations with time and dose extension.

• 지질공학
• /
• 제33권1호
• /
• pp.151-167
• /
• 2023

본 연구는 LNG저장탱크가 설치될 느슨한 포화사질지반을 대상으로 개정된 액상화 평가법과 UBC3D-PLM 모델을 이용한 1차원 유효응력해석에 의한 액상화 평가법을 비교한 것이다. 이를 위해 여러가지 실내 및 현장시험을 실시하여 필요한 Parameter를 산정하였다. 검토결과, 지진응답해석결과와 SPT N 값을 이용하는 개정 액상화 평가법은 액상화 발생 가능성을 높게 평가하였지만, 다양한 액상화 저항인자를 고려할 수 있는 유효응력해석법은 액상화에 다소 안정한 것으로 분석되었다. UBC3D-PLM 모델을 이용한 1차원 유한요소해석을 할 경우 보다 간편하게 액상화 안정성 검토가 가능하였고, 액상화 보강 영역을 최소화 할 수 있었다. 또한, LNG저장탱크의 기초를 고려한 2·3차원 수치해석 시에는 액상화 발생 시 내진설계 및 거동특성을 규명하는 것에 활용될 수 있을 것으로 기대된다.

• 기본간호학회지
• /
• 제16권4호
• /
• pp.438-448
• /
• 2009

Purpose: To examine the results of PBL classes for sophomore nursing students during one semester. Method: Self-reflection journals and class evaluation questionnaires were collected from 121 nursing students and analyzed. Results of class evaluation questionnaires were analyzed using mean scores, SD, frequencies and percentages. Significant statements were derived by repeated review of the self-reflection journals by the researchers. Results: The statements, 'Understanding of PBL' 'Improvement of human relationships' 'Expansion of nursing knowledge' 'Excellency in nursing class and application of nursing skills in nursing practices' and 'Improvement of learning ability and attitude during classes' were derived from the self-reflection journals. Analysis of class evaluation questionnaires showed the following scores: prerequisite of PBL (3.0/4), role of facilitator (3.48/4) and satisfaction with PBL learning (3.31/4). Also some complaints such as lack of adequate references in the library, and confusion in at the beginning of PBL were noted. Conclusion: PBL was effective. Using the results of the study for planning a more effective PBL class syllabus is recommended.

• 한국안전학회지
• /
• 제30권6호
• /
• pp.56-62
• /
• 2015

Recently, one of countermeasures against aging SOC infrastructures, performance-focused management including the serviceability, functionality, durability, and economics has been changed from the structural safety-focused evaluation has changed into The current inspection and diagnosis for the major SOC facilities in Korea has been carried out by the specific principle of details, and most of them checked by the visual inspection are focused on the repair and rehabilitation of the damaged structures, thus they are the preventive maintenance. However, the performance-focused management should be replaced for the effective and economic maintenance as wells as for the minimization of the damage. In this regard, this study the appropriacy of the current evaluation items about the concrete retaining wall, one of SOC infrastructures as the previous step forward the performance-focused management. In order to deduct the effective evaluation items in order, the entropy, analytic hierachy process (AHP), and promethee analysis were peformed and the results were compared and discussed.

• 한국국방경영분석학회지
• /
• 제11권1호
• /
• pp.47-54
• /
• 1985

In this paper, for the systematic software evaluation and selection objective, we first discussed the systems software which is distinctly different from applications oriented software in source, concept and use. We suggested the systematic procedures for the effective software evaluation and selection by analyzing categories of commercially available proprietary software, sources of information for software selection, request for information, request for proposal, user surveys as an aid to evaluation and evaluation of responses to the RFP.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.305-307
• /
• 2014

Pyroprocessing (or pyrometallurgy) is the way of extracting from materials subjected to high temperatures. Generally, this process has a high energy consumption because of mass production and heating-up. To attain effective and efficient energy management, energetic analysis using 0-dimensional model is usually conducted. However, this model can lead to a misunderstanding about energy evaluation due to many assumptions and limitations. In this study, heat & mass balance using 0-dimensional model was reviewed to systematize problems and considerations in general process energy evaluation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.43-50
• /
• 2000

This paper shows the recent changes of national transportation policies in some developed countries and argues that the evaluation method of the effect of transportation investment on national economy should be improved to reveal real impact of the investment. The evaluation method should develope effective performance indicators of the goals set in national transportation policy. To estimate correctly the magnitude of transportation services in national economy, the evaluation method also provides a way to measure in-house transportation services and to overcome the limits of marginal effect equal equation.

• 한국IT서비스학회지
• /
• 제7권1호
• /
• pp.103-116
• /
• 2008

Efficiency and objectiveness are the most critical issues in the evaluation of software projects. It is beneficial not only to software companies participated in bids, but to administrators of projects. This study attempts to find an improvement in the evaluation process by connecting the historical data of bidding companies in the software company report system with the governmental procurement system. The proposed means will eliminate unnecessary and repetitive submission step of bidding companies and provide the administrator with objective evaluation process. Also, this paper proposes an automated process for quantifying the business experience of bidding companies.

• Geomechanics and Engineering
• /
• 제5권5호
• /
• pp.447-462
• /
• 2013

An analysis model for predicting the tip bearing capacity of drilled shafts in cohesionless soils is improved in this study. The evaluation is based on large amounts of drilled shaft load test data. Assessment on the analysis model reveals a greater variation in two coefficients, namely, the overburden bearing capacity factor ($N_q$) and the bearing capacity modifier for soil rigidity (${\zeta}_{qr}$). These factors are modified from the back analysis of drilled shaft load test results. Different effective shaft depths and interpreted capacities at various loading stages (i.e., low, middle, and high) are adopted for the back calculation. Results show that the modified bearing capacity coefficients maintain their basic relationship with soil effective friction angle ($\bar{\phi}$), in which the $N_q$ increases and ${\zeta}_{qr}$ decreases as $\bar{\phi}$ increases. The suggested effective shaft depth is limited to 15B (B = shaft diameter) for the evaluation of effective overburden pressure. Specific design recommendations for the tip bearing capacity analysis of drilled shafts in cohesionless soils are given for engineering practice.

• 설비공학논문집
• /
• 제17권8호
• /
• pp.695-703
• /
• 2005

The objective of this study is to determine the effective thermal conductivity and thermal resistance values in test boreholes with three different fill materials. To evaluate these heat transfer properties, in-situ tests on four vertical boreholes were conducted by adding a monitored amount of heat to water over various test lengths. Two parameter estimation models, line-source and numerical one-dimensional models, for evaluation of thermal response test data were compared when applied on the same four data sets. Results show that the average thermal conductivity deviation between measured data and these two models is in the range of $3.03\%$ to $4.45\%$. The effect of increasing grout thermal conductivity from 1.34 to 1.82 $W/m^{\circ}C$ resulted in overall increases in effective formation thermal conductivity by $11.1\%$ to $51.9\%$ and reductions in borehole thermal resistance by $11.6\%$ to $26.1\%$.