• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1561-1567
• /
• 2017

This paper calculates the effective capacity of EES providing the primary frequency control service based on its contribution to the frequency response of the power system. The amount of governor response from conventional generators which can be replaced by the primary frequency control from EES keeping the frequency response of the power system is defined as the effective capacity. The proposed method for calculating the effective capacity of EES is verified through case studies employing Korean power system. Furthermore, the application of the effective capacity of EES to power system operation is also discussed.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.2
• /
• pp.49-56
• /
• 2018

The use of highly absorptive materials in cement-based materials is increasing for internal curing purpose. However, calculation of correct absorption capacity of such materials is not easy, which leads to change in the effective water-to-cement ratio of cement paste by either absorbing or releasing water. In this study, effective absorption capacity of a highly absorptive material was found using isothermal calorimetry. Moreover, the effect of specific surface area was investigated. It was found that the method was capable of finding effective water absorption capacity of activated carbon fiber. For the activated carbon fiber used in this research, the effect of specific surface area was negligible because the high BET surface area was due to micropores less than 1nm, which does not affect the rate of hydration curve. Thus, the effective absorption capacity of such materials can be found successfully using this method.

• Geomechanics and Engineering
• /
• v.5 no.5
• /
• pp.447-462
• /
• 2013

An analysis model for predicting the tip bearing capacity of drilled shafts in cohesionless soils is improved in this study. The evaluation is based on large amounts of drilled shaft load test data. Assessment on the analysis model reveals a greater variation in two coefficients, namely, the overburden bearing capacity factor ($N_q$) and the bearing capacity modifier for soil rigidity (${\zeta}_{qr}$). These factors are modified from the back analysis of drilled shaft load test results. Different effective shaft depths and interpreted capacities at various loading stages (i.e., low, middle, and high) are adopted for the back calculation. Results show that the modified bearing capacity coefficients maintain their basic relationship with soil effective friction angle ($\bar{\phi}$), in which the $N_q$ increases and ${\zeta}_{qr}$ decreases as $\bar{\phi}$ increases. The suggested effective shaft depth is limited to 15B (B = shaft diameter) for the evaluation of effective overburden pressure. Specific design recommendations for the tip bearing capacity analysis of drilled shafts in cohesionless soils are given for engineering practice.

• Journal of Communications and Networks
• /
• v.15 no.5
• /
• pp.476-485
• /
• 2013

In this paper, the effective capacity of a multiple-input multiple-output (MIMO) system in two different cases with receive antenna selection (RAS) and transmit antenna selection (TAS) schemes is investigated. A closed-form solution for the maximum constant arrival rate of this network with statistical delay quality of service (QoS) constraint is extracted in the quasi-static fading channel. This study is conducted in two different cases.When channel state information (CSI) is not available at the MIMO transmitter, implementation of TAS is difficult. Therefore, RAS scheme is employed and one antenna with the maximum instantaneous signal to noise ratio is chosen at the receiver. On the other hand, when CSI is available at the transmitter, TAS scheme is executed. In this case, one antenna is selected at the transmitter. Moreover, an optimal power-control policy is applied to the selected antenna and the effective capacity of the MIMO system is derived. Finally, this optimal power adaptation and the effective capacity are investigated in two asymptotic cases with the loose and strict QoS requirements. In particular, we show that in the TAS scheme with the loose QoS restriction, the effective capacity converges to the ergodic capacity. Then, an exact closed-form solution is obtained for the ergodic capacity of the channel here.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.632-650
• /
• 2013

The paper considers a spectrum sharing cognitive radio (CR) network coexisting with a primary network under the average interference power constraint. In particular, the secondary user (SU) is assumed to carry delay-sensitive services and thus shall satisfy a given delay quality-of-service (QoS) constraint. The secondary receiver is also assumed to be equipped with multiple antennas to perform maximal ratio combining (MRC) to enhance SU performance. We investigate the effective capacity of the SU with MRC diversity under aforementioned constraints in Nakagami fading environments. Particularly, we derive the optimal power allocation to achieve the maximum effective capacity of the SU, and further derive the effective capacity in closed-form. In addition, we further obtain the closed-form expressions for the effective capacities under three widely used power and rate adaptive transmission schemes, namely, optimal simultaneous power and rate adaptation (opra), truncated channel inversion with fixed rate (tifr) and channel inversion with fixed rate without truncation (cifr). Numerical results supported by simulations are presented to consolidate our studies. The impacts on the effective capacity of various system parameters such as the number of antennas, the average interference power constraint and the delay QoS constraint are investigated in detail. It is shown that MRC diversity can significantly improve the effective capacity of the SU especially for cifr transmission scheme.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.5
• /
• pp.13-26
• /
• 2017

Solar power is expected to account for a considerable proportion of domestic renewable energy compared to other renewable energy sources. In this study, capacity credits, which are the most important factors for evaluating the effective capacity of photovoltaic power, are estimated by capacity factor-based approximation method. To do this, we use the data of solar power generation and capacity over many years and calculate the capacity factors of the domestic solar power. The results of the existing methods and ours proposed in this paper are compared and analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.928-938
• /
• 2008

Though services requiring Quality-of-Service (QoS) guarantees such as Voice over Internet Protocol (VoIP) have been widely deployed on the internet, most of internet backbone networks, unfortunately, do not distinguish them from the best-effort services. Thus estimating the effective capacity meaning the traffic volume that the backbone networks maximally accommodate with keeping QoS guarantees for the services is very important for Internet Service Providers. This paper proposes a test-bed based on ns-2 to evaluate the effective capacity of backbone networks and then estimates the effective capacity of an experimental backbone network using the test-bed in terms of the service standard of the VoIP service. The result showed that the effective capacity of the network is estimated as between 12% and 55% of its physical capacity, which is depending on the maximum delay guarantee probability, and strongly affected by not only the type of offered workload but also the quality standard. Especially, it demonstrated that in order to improve the effective capacity the maximum end-to-end delay requirement of the VoIP service needs to be loosened in terms of the probability to guarantee.

• Herbal Formula Science
• /
• v.21 no.2
• /
• pp.165-172
• /
• 2013

Objectives : This experiment was performed in order to study the effect of Maekmundong-tang on dyspnea patients. Methods : This study involved 14 dyspnea patients from March 1, 2012 to May 31, 2012. Lung capacity of the patients is evaluated with Peak flow meter. Results : Maekmundong-tang administration was revealed effect on dyspnea patients' lung capacity. Conclusions : It was found that Maekmundong-tang administration was effective on dyspnea patients' lung capacity. The mean degree of improvement was 21.79(L/min). It was shown that the more mild dyspnea level was, the more effective and short-term administration more effective.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.40-47
• /
• 1996

A method for computing effectiv ebandwidth of aggregated varable bit rate (VBR) moving picture experts group (MPEG) video traffic is proposed. To compute statistical characteristics of aggregated MPEG traffic, first we split input MPEG traffic into I, B, and P frame traffics and aggregate respective I, B, and P frame traffics according to the frame type. Second statisticsal characteristics of the aggregated MPEG traffic are obtained using those of aggregated I, B, and P frame traffics. The effective bandwidth of the aggregated I frame traffic is computed by using the gaussian bound. Using the modified equivalent capacity, we obtain the effective bandwidths of aggregated B and P frame traffics and then compute the effective bandwidth of the combined B and P frame traffic. Finally the effective bandwidth of the aggregated MPEG traffic is computed by adding the gaussian bound of the aggregated I frame traffic and modifed equivalent capacity of combined B and P frame traffic. Computer simulation shows that the proposed method estimates effective bandwidth of the aggregated MPEG traffic well.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.4
• /
• pp.79-91
• /
• 2019

The capacity credit (CC) is a key metric for mid- to long-term power system capacity planning. The purpose of this study is to estimate the CCs of domestic wind turbines. Based on hourly capacity factor (CF) data during the seven years from 2011 to 2017, the new so-called probabilistic CF scheme is introduced to effectively reflect the variability of CFs on CC estimation. The CCs are then estimated through the CF-based method and the ELCC (Effective Load Carrying Capability) method reflecting the probabilistic CF scheme, and the results are compared. The results show that the CC value 0.019 for domestic wind turbines proposed in the $8^{th}$ Basic Plan for Electricity Supply and Demand corresponds to the CC with a confidence level slightly lower than 95%.