• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.551-554
• /
• 2016

Silver particles were synthesized by chemical reduction with ionic liquids. Structure of silver particles were significantly affected by the cation parts of the ionic liquids. With increasing the length of the cation part, the smaller silver particles were formed regardless of the anion type. This is mainly attributed to the different stability of the ionic liquid structure formed by physical bond between cation parts. Among seven ionic liquids, [Omim][$PF_6$] was the most effective for synthesizing silver particles.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.183-188
• /
• 2012

A blue phosphorescent $Ir(dfpypy)_3$ (dfpypy:fluorinated pyridine-pyridine ligand) complex with meridional configuration has been synthesized by newly developed effective method and its solid state structure and photoluminescence are characterized. For this complex, mer-$Ir(dfpypy)_3$, the glass-transition and decomposition temperatures appear at $160^{\circ}C$ and $384^{\circ}C$ respectively in TGA and DSC experiments, which indicates that this complex has high thermal stability. In a crystalline structure, an average Ir-C bond length of mer-$Ir(dfpypy)_3$ is slightly longer than that of fac-$Ir(dfpypy)_3$, which assumed to be due to the weak trans-influence. The absorption and emission spectra are observed more red-shifted in mer-$Ir(dfpypy)_3$ than fac-$Ir(dfpypy)_3$. In addition, the former is readily oxidized than the latter in electrochemical behavior.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.10-17
• /
• 2004

Shear tests were performed on four ends of full scale U-type beams which were designed by optimum process for the depth with a live load of 4903Pa. The ratio of width to depth of full scale 10.5 m-span, composite U-type beams with topping concrete was greater than 2. Following conclusions were obtained from the evaluation on the shear performance of these precast prestressed beams. 1) Those composite U-type beams performed homogeneously up to the failure load, and conformed to ACI Strength design methods in shear and flexural behaviors. 2) The anchorage requirements on development length of strand In the ACI Provisions preyed to be a standard to determine a failure pattern within the limited test results of the shallow U-type beams. 3) Those all shear crackings developed from the end of the beams did not lead to anchorage failure. However, initiated strand slip may leads the bond failure by increasing the size of diagonal shear crackings. 4) The flexural mild reinforcement around the vertical center of beam section was effective for developments of a ductile failure.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.675-684
• /
• 2010

The reinforced concrete members are designed to fail in flexural to lead ductile fracture. In the building structures, the failure is typically imposed on beams to prevent damages in columns. However, progression of plastic collapse mechanism may ultimately develop, a plastic hinge at the bottem end of the first floor column, which then can be subjected to shear or bond finally due to large axial force and small shear span-to-depth ratio. In this study, 10 RC column specimens failed in shear after flexural yielding was investigated to determine the factors affecting the plastic hinge length. The findings of this study showed that the most effective factor affecting the plastic hinge length was an axial force. As an axial force increase, an axial strain and a ductility ratio were decreased obviously. The test also shows the observed plastic hinge length was about 0.8~1.2d and the this result has difference compared with forward research.

• KSBB Journal
• /
• v.10 no.5
• /
• pp.491-498
• /
• 1995

In order to fraclionate ${\alpha}$-, ${\beta}$- and ${\gamma}$-cyclodextrins(CDs) from CD reaction mixture, various CD adsorbents were manufactured using fatty acids as the ligand molecules and anion exchange resins as matrix. Among several anion exchange resins, DEAE Cellulose was found to be the most suitable matrix for binding fatty acid. The binding stability between DEAE Cellulose and capric acid was tested under the various operation conditions, such as temperature, ethanol concentration, and ionic strength. Specific CD adsorbents manufactured with different chain-length fatty acids, saturated and unsaturated, were compared in terms of the recovery yield and selectivity of ${\alpha}$-, ${\beta}$- and ${\gamma}$-CDs. Stearic acid (C18, saturated) was identified as the most effective ligand for fractionation of ${\alpha}$-CD, and linoleic acid ((C18, unsaturated ) for ${\beta}$-CD. The spacer length between the matrix and ligand was required for effective adsorption of CDs, and the double bond in fatty acid molecules was also acted as an important factor determining recovery yield and selectivity. The elusion patterns of ${\alpha}$- and ${\alpha}$-, ${\beta}$-CD from column packed with stearic acid and linoleic acid CD adsorbents were also investigated at the various elusion conditions for fractionation of ${\alpha}$- and ${\beta}$-CD.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.441-442
• /
• 2012

SnNb2O6 nanoplates were prepared by a solvothermal synthesis with water and ethanol mixed solvent. For improvement of their properties, as-prepared SnNb2O6 nanoplates also were calcined. The prepared powder was characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), Transmission electron microscope (TEM), UV-vis spectroscopy, Raman spectrometer, Brunauer-Emmett-Teller (BET). The calcined nanoplates have a smaller surface area than the as-prepared nanoplates have. Nevertheless, in the case of the optical absorption properties, the calcined nanoplates could absorb more photon energy, due to their smaller band gaps. The Raman analysis revealed that the Nb-O bond length in the calcined nanoplates was longer than that in the as-prepared nanoplate. The higher optical absorption capability of the calcined nanoplates was attributed to the local structure variation within them. Furthermore the high crystallinity of the calcined nanoplates is effective in improving the generation of charge carriers. So, It was found that the calcined nanoplates exhibited superior photocatalytic activity for the evolution of H2 from an aqueous methanol solution than the as-prepared nanoplates under UV and visible irradiation. Therefore, the enhanced photocatalytic activity of the calcined nanoplate powder for H2 evolution was mainly attributed to its high crystallinity and improved optical absorption property resulting from the variation of the crystal structure.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.23.1-23.1
• /
• 2009

ZnO is of great interest for various technological applications ranging from optoelectronics to chemical sensors because of its superior emission, electronic, and chemical properties. In addition, vertically well-aligned ZnO nanorods on large areas with good optical and structural properties are of special interest for the fabrication of electronic and optical nanodevices. To date, several approaches have been proposed for the growth of one-dimensional (1D) ZnO nanostructunres. Several groups have been reported the MOCVD growth of ZnO nanorods with no metal catalysts at $400^{\circ}C$, and fabricated a well-aligned ZnO nanorod array on a PLD prepared ZnO film by using a catalyst-free method. It has been suggested that the synthesis of ZnO nanowires using a template-less/surfactant-free aqueous method. However, despite being a well-established and cost-effective method of thin film deposition, the use of magnetrons puttering to grow ZnO nanorods has not been reported yet. Additionally,magnetron sputtering has the dvantage of producing highly oriented ZnO film sat a relatively low process temperature. Currently, more effort has been concentrated on the synthesis of 1D ZnO nanostructures doped with various metal elements (Al, In, Ga, etc.) to obtain nanostructures with high quality,improved emission properties, and high conductance in functional oxide semiconductors. Among these dopants, Ga-doped ZnO has demonstrated substantial advantages over Al-doped ZnO, including greater resistant to oxidation. Since the covalent bond length of Ga-O ($1.92\;{\AA}$) is nearly equal to that of Zn-O ($1.97\;{\AA}$), high electron mobility and low electrical resistivity are also expected in the Ga-doped ZnO. In this article, we report the successful growth of Ga-doped ZnO nanorods on c-Sapphire substrate without metal catalysts by magnetrons puttering and our investigations of their structural, optical, and field emission properties.

• Steel and Composite Structures
• /
• v.9 no.5
• /
• pp.419-444
• /
• 2009

Flange and web local buckling in beam plastic hinge regions of steel moment frames can prevent beam-column connections from achieving adequate plastic rotations under earthquake-induced forces. Reducing the flange-web slenderness ratios (FSR/WSR) of beams is the most effective way in mitigating local member buckling as stipulated in the latest seismic design specifications. However, existing steel moment frame buildings with beams that lack the adequate slenderness ratios set forth for new buildings are vulnerable to local member buckling and thereby system-wise instability prior to reaching the required plastic rotation capacities specified for new buildings. This paper presents results from a research study investigating the cyclic behavior of steel I-beams modified by a welded haunch at the bottom flange and reinforced with glass fiber reinforced polymers at the plastic hinge region. Cantilever I-sections with a triangular haunch at the bottom flange and flange slenderness ratios higher then those stipulated in current design specifications were analyzed under reversed cyclic loading. Beam sections with different depth/width and flange/web slenderness ratios (FSR/WSR) were considered. The effect of GFRP thickness, width, and length on stabilizing plastic local buckling was investigated. The FEA results revealed that the contribution of GFRP strips to mitigation of local buckling increases with increasing depth/width ratio and decreasing FSR and WSR. Provided that the interfacial shear strength of the steel/GFRP bond surface is at least 15 MPa, GFRP reinforcement can enable deep beams with FSR of 8-9 and WSR below 55 to maintain plastic rotations in the order of 0.02 radians without experiencing any local buckling.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.3
• /
• pp.169-174
• /
• 2006

The aim of this work was to prepare tenoxicam-ethanolamine salt with improved physicochemical properties for transdermal application. Tenoxicam-ethanolamine salt was prepared in methylene chloride and its physicochemical properties were investigated by DSC and FT-lR. The broad peak of tenoxicam around 3600-3200 $cm^-1$ was shifted to lower wavenumber and more broadened. The characteristic endothermic melting peak of tenoxicam appeared at $223^{\circ}C$. The melting peak of tenoxicam-ethanolamine salt was shifted to $159^{\circ}C$. In contrast to relatively small difference in the partition coefficients of tenoxicam and the tenoxicam-ethanolamine salt, large difference in aqueous solubility was observed. $Crovol^{\circledR}$ PK4O (PEG-12 palm kernel glycerides) provided the highest skin flux for both compounds. The order of the enhancing effect of the various vehicles tested was similar for tenoxicam and tenoxicam-ethanolamine salt, which indicated that their enhancing mechanism for tenoxicam and tenoxicam-ethanolamine salt is similar. Tenoxicam-ethanolamine salt had a higher skin flux than tenoxicam by 1.2- to 31.7-fold, depending on the vehicles used. It is suggested that the vehicles with medium HLB value, 1 double bond, and lower ethylene oxide chain length have a better ability to modify the permeability of the stratum corneum and to promote the effective penetration of tenoxicam and tenoxicam-ethanolamine salt.

• ETRI Journal
• /
• v.39 no.6
• /
• pp.866-873
• /
• 2017

We propose a multilayered-substrate-based power semiconductor discrete device package for a low switching loss and high heat dissipation. To verify the proposed package, cost-effective, low-temperature co-fired ceramic, multilayered substrates are used. A bare die is attached to an embedded cavity of the multilayered substrate. Because the height of the pad on the top plane of the die and the signal line on the substrate are the same, the length of the bond wires can be shortened. A large number of thermal vias with a high thermal conductivity are embedded in the multilayered substrate to increase the heat dissipation rate of the package. The packaged silicon carbide Schottky barrier diode satisfies the reliability testing of a high-temperature storage life and temperature humidity bias. At $175^{\circ}C$, the forward current is 7 A at a forward voltage of 1.13 V, and the reverse leakage current is below 100 lA up to a reverse voltage of 980 V. The measured maximum reverse current ($I_{RM}$), reverse recovery time ($T_{rr}$), and reverse recovery charge ($Q_{rr}$) are 2.4 A, 16.6 ns, and 19.92 nC, respectively, at a reverse voltage of 300 V and di/dt equal to $300A/{\mu}s$.