• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.569-594
• /
• 2014

Damage detection methods based on modal analysis have been widely studied in recent years. However the calculation of mode shapes in real structures can be time consuming and often requires dedicated software programmes. In the present paper the combined application of proper orthogonal decomposition and gapped smoothing method to structural damage detection is presented. The first is used to calculate the dynamic shapes of a damaged structural element using only the time response of the system while the second is used to derive a reference baseline to which compare the data coming from the damaged structure. Experimental verification is provided for a beam case while numerical analyses are conducted on plates. The introduction of a stiffener on a plate is investigated and a method to distinguish its influence from that of a defect is presented. Results highlight that the derivatives of the proper orthogonal modes are more effective damage indices than the modes themselves and that they can be used in damage detection when only data from the damaged structure are available. Furthermore the stiffened plate case shows how the simple use of the curvature is not sufficient when analysing complex components. The combined application of the two techniques provides a possible improvement in damage detection of typical aeronautical structures.

• Journal of Korea Multimedia Society
• /
• v.22 no.9
• /
• pp.1069-1079
• /
• 2019

In this study, we developed a $PM_{10}$ forecasting model using DNN and Membership Function, and improved the forecasting performance. The model predicts the $PM_{10}$ concentrations of the next 3 days in the Seoul area by using the weather and air quality observation data and forecast data. The best model(RM14)'s accuracy (82%, 76%, 69%) and false alarm rate(FAR:14%,33%,44%) are good. Probability of detection (POD: 79%, 50%, 53%), however, are not good performance. These are due to the lack of training data for high concentration $PM_{10}$ compared to low concentration. In addition, the model dose not reflect seasonal factors closely related to the generation of high concentration $PM_{10}$. To improve this, we propose Julian date membership function as inputs of the $PM_{10}$ forecasting model. The function express a given date in 12 factors to reflect seasonal characteristics closely related to high concentration $PM_{10}$. As a result, the accuracy (79%, 70%, 66%) and FAR (24%, 48%, 46%) are slightly reduced in performance, but the POD (79%, 75%, 71%) are up to 25% improved compared with those of the RM14 model. Hence, this shows that the proposed Julian forecast model is effective for high concentration $PM_{10}$ forecasts.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.3
• /
• pp.51-57
• /
• 1979

In order to screen the shade tolerance soybean lines, several important agronomic characters were studied after shade treatment at various growth stages. A severe influence of light reduction on agronomic characters found during the late flowering to pod filling period, and the response to shading was significantly different among the lines tested. Examining of pods number per plant after shade treatment during pod filling stage would be most effective method in the screening for shade tolerance soybean lines.

• Korean Journal of Agricultural Science
• /
• v.19 no.2
• /
• pp.161-169
• /
• 1992

Studies were conducted to examine the effects of single or combined treatment of uniconazole [(E)-1-(4-chlorophenyl)-4, 4-dimethyl 2(1, 2,-4-triazol-1-yl)-1-penten-3-ol)] and silver thiosulfate (STS) on reducing ozone injury to snap beans (Phaseolus vulgaris L. 'Strike'). Two weeks after seeding, plants were given a soil drench of uniconazole(XE-1019) solution at concentrations of 0.001, 0.005 and 0.025 mg/pot, and then two days prior to ozone fumigation, 0.3 and 0.6 mM STS containing 0.01% Tween-20 were also sprayed. Uniconazole was effective in providing protection against ozone injury through increase activities of free radical scavengers such as superoxide dismutase (SOD) and peroxidase (POD) as well as the increase of chlorophyll content and stomatal resistance resulted from plant growth retardation. The phytoprotective effects of STS seemed to be related to its properly of blocking the ethylene action and increasing activities of SOD and POD. Even at low concentrations, a combined treatment with uniconazole drench, STS spray significantly reduced ozone injury compared to single application.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.15 no.3
• /
• pp.141-146
• /
• 2015

Background: An understanding of the features of postoperative pain is essential for optimal analgesic dosing strategies. Using a visual analogue scale (VAS) score and patient controlled analgesia (PCA) infusion pattern analysis, an anesthesiologist can estimate when and how severely patients suffer from pain. Several reports have been published about circadian changes in the pain threshold. Postoperative pain was analyzed retrospectively in 250 patients who underwent orthognathic surgery. Methods: A total of 250 patients were allocated into two groups according to the time of recovery from anesthesia. Patients in the early group (group E) recovered from anesthesia before 06:00 p.m. Patients in the late group (group L) recovered from anesthesia after 06:00 p.m. All patients received intravenous patient controlled analgesia (IV PCA) at the end of the operation. The VAS score of pain intensity was measured. Self-administration of bolus analgesic from the IV PCA device was also analyzed according to actual time and elapsed time. Results: VAS scores showed no difference between the two groups except 36 hours after recovery from anesthesia. On POD1, there were two peaks for self-administration of bolus analgesics in group L and one peak in the morning for group E. Two peaks each in the morning and in the afternoon were shown in both groups on POD2. Conclusions: Diurnal variance in pain should be considered for effective dosing strategies.

• Journal of Biosystems Engineering
• /
• v.34 no.1
• /
• pp.21-29
• /
• 2009

A rapeseed reaping equipment attachable to a conventional combine was developed in order to harvest rapeseed for bio-diesel materials. This study was carried out to measure the harvest feasibility of a prototype combine in rapeseed fields. Grain, stem and pod flow rate, grain qualities (whole kernel, damaged kernel, unhulled kernel, material-other-than-grain) and grain loss rates (header, threshing, separation) were investigated in each field test. As the result of the fold test, the average grain flow rates of SUNMANG and MS varieties showed 1,430 kg/h and 2,038 kg/h, respectively. The average stem and pod flow rates showed 3,443 kg/h and 6,596 kg/h, respectively. In each working speed, the average whole kernel rate and the material-other-than-grain showed 99.9% and below 0.08%, respectively. In the average grain loss, the rates showed 5.66% in case of SUNMANG and 5.94% in MS. Header loss was higher than other parts for SUNMANG. However, threshing loss was relatively higher than other parts for MS. Header loss rate due to side cutter knifes, however, was not so high when compared with a grain loss due to the cutter bar. Effective field capacity and field efficiency of the prototype combine showed 0.389 ha/h and 44%, respectively. Comparison of customary combine with the prototype combine through field test demonstrated that the header loss was reduced by 69.3% when the prototype combine was used.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.283-292
• /
• 2011

This paper proposed a new multi-level inverter topology based on a H-bridge with two switches and two diodes connected to the DC-link. The output voltage of the proposed topology is quite closer to a sinusoidal waveform compared with a typical single phase inverter. The proposed multi-level inverter is applicable to a power conditioning system for renewable energy sources, and it can be also used as a building block of a cascaded multi-level inverter for a high voltage application. In case of conventional H-bridge type or NPC type multi-level inverter, 8 controllable switches are used to obtain a 5 level output voltage, but the proposed multi-level inverter requires only 6 controllable switches. Thus the circuit configuration is quite simple, reliable and cost-effective implementation is possible. The efficiency can be improved owing to the reduction of the switching loss. A new PWM method based on POD modulation is suggested which requires only one carrier signal. The switching sequence to make the capacitor voltage balanced is also considered. The feasibility is studied through simulation and experiment.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.3
• /
• pp.59-70
• /
• 2023

In order to predict low-level wind shear at Incheon International Airport (RKSI), a Low-Level Wind Shear prediction system (KMAP-LLWS) along the runway take-off and landing route at RKSI was established using Korea Meteorological Administration Post-Processing (KMAP). For the performance evaluation, the case of low-level wind shear cases calculated from Aircraft Meteorological Data Relay (AMDAR) from July 2021 to June 2022 was used. As a result of verification using the performance evaluation index, POD, FAR, CSI, and TSS were 0.5, 0.85, 0.13, and 0.34, respectively, and the prediction performance was improved by POD, CSI, and TSS compared to the Low-Level Wind Shear prediction system (LDPS-LLWS) calculated using the Korea Meteorological Administration's Local Data Assimilation and Prediction System (LDAPS). This means that the use of high-resolution numerical models improves the predictability of wind changes. In addition, to improve the high FAR of KMAP-LLWS, the threshold for low-level wind shear strength was adjusted. As a result, the most effective low-level wind shear threshold at 8.5 knot/100 ft was derived. This study suggests that it is possible to predict and respond to low-level wind shear at RKSI. In addition, it will be possible to predict low-level wind shear at other airports without wind shear observation equipment by applying the KMAP-LLWS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.2
• /
• pp.140-145
• /
• 2007

This study was carried out to develop effective test method by soybean stink bug and to screen resistant genetic resources against soybean stink bug. The damage pod rate by stink bug showed 40% of most soybean varieties and was selected about 10% low of 10 varieties by 298 variety and degree in soybean at first year Stink bug damage rate research for 102 varieties that stink bug damage rate lowed at first year showed 10% low of 12 varieties and from 20% to 30% of the other varieties. So testing material is "Ilpumgeumjeongkong" to develop for effective test method soybean stink bug and result for stink bug damage rate research of according to growth stage showed rapidly high more full seed than full pod. Full seed stage (R6) was highest to 35.5% for stink bug damage rate. Result of resistant genetic resources selection according to stink bug damage pod rate was lowed of best to 10.3% for "Peking, Sorogkong, Hwangsaegjunjeari and Sobaeknamulkong" in the order. Also, stink bug damage seed rate was similar too. So "Peking, Sorogkong, Hwangsaegjunjeari and Sobaeknamulkong" were thought resistant variety against stink bug. Additional study carried out with "Peking and Sorogkong" so that concretely investigate about stink bug's refuse reaction. This result showed 10.0% for Peking and 14.2% for Sorogkong at R6 stage. But, damage pod rate was rapidly lowed.

• Journal of Korean Port Research
• /
• v.14 no.1
• /
• pp.13-26
• /
• 2000

In this paper, we compare and analyze the current state of the productivity of the stevedoring work among several container terminals in 1999. Based on these results of analysis, we firstly classify several factors which impede the efficient operations of container terminal as follows ; late arrival of container beyond cargo closing time(CCT), change of port of destination, change of vessel, and return cargo. Such factors are major cause for the cargo rehandling on terminals, thus deteriorate the overall performance of transfer crane during the stevedoring work. In order to improve the productivity of container terminal, we suggest that it is necessary for establishing and operating the efficient logistics management system. Especially, we emphasize the importance of information exchange on the scheduled cargoes among the relevant parties such as shippers, shipping companies, and terminal operators, which is the most effective way to alleviate the cargo rehandling.