• 에너지공학
• /
• 제29권3호
• /
• pp.42-49
• /
• 2020

Precipitated Calcium Carbonate (PCC) can be utilized in energy-effective paper production. Limestone is a raw material for synthesizing PCC. Since the PCC production yield depends on the physicochemical properties of the limestone, a basic investigation of the raw limestone is required. This study provides a brief review of the origin of limestone, limestone distribution characteristics, and limestone deposits in Korea and Vietnam. Most limestones in Korea were formed in the Paleozoic era. On the other hand, limestones in Vietnam have various ages from the Precambrian to the Triassic. Limestone is the most largely produced mineral in Korea, but Vietnam has 5 times more amount of limestone reserves than Korea.

• Membrane and Water Treatment
• /
• 제5권1호
• /
• pp.15-29
• /
• 2014

Reverse Osmosis (RO) desalination has gained wide and increasing acceptance around the world as a straightforward undertaking to alleviate the alarming water crisis. An enhanced monitoring of the quality of the water feeding in seawater RO (SWRO) plant through the application of an effective pretreatment option is one of the keys to the success of RO technology in desalination plants. Over the past 10 years, advances in ultrafiltration (UF) membrane technologies in application for water and wastewater treatment have prompted an impetus for using membrane pretreatment in seawater desalination plants. By integrating SWRO plant with UF pretreatment, the rate of membrane fouling can be significantly reduced and thus extend the life of RO membrane. With the growing importance and significant advances attained in UF pretreatment, this review presents an overview of UF pretreatment in SWRO plants. The advantages offered by UF as an alternative of pretreatment option are compared to the existing conventionally used technologies. The current progress made in the integration of SWRO with UF pretreatment is also highlighted. Finally, the recent advances pursued in UF technology is reviewed in order to provide an insight and hence path the way for the future development of this technology.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권7호
• /
• pp.3594-3607
• /
• 2017

The traditional feature extraction methods such as principal component analysis (PCA) cannot obtain the local structure of the samples, and locally linear embedding (LLE) cannot obtain the global structure of the samples. However, a common drawback of existing PCA and LLE algorithm is that they cannot deal well with the sparse problem of the samples. Therefore, by integrating the globality of PCA and the locality of LLE with a sparse constraint, we developed an improved and unsupervised difference algorithm called Sparse Difference Embedding (SDE), for dimensionality reduction of high-dimensional data in small sample size problems. Significantly differing from the existing PCA and LLE algorithms, SDE seeks to find a set of perfect projections that can not only impact the locality of intraclass and maximize the globality of interclass, but can also simultaneously use the Lasso regression to obtain a sparse transformation matrix. This characteristic makes SDE more intuitive and more powerful than PCA and LLE. At last, the proposed algorithm was estimated through experiments using the Yale and AR face image databases and the USPS handwriting digital databases. The experimental results show that SDE outperforms PCA LLE and UDP attributed to its sparse discriminating characteristics, which also indicates that the SDE is an effective method for face recognition.

• Smart Structures and Systems
• /
• 제13권6호
• /
• pp.1065-1094
• /
• 2014

Civil engineers always face the challenge of uncertainty in planning, building, and maintaining infrastructure. These works rely heavily on a variety of surveying and monitoring techniques. Unmanned aerial vehicles (UAVs) are an effective approach to obtain information from an additional view, and potentially bring significant benefits to civil engineering. This paper gives an overview of the state of UAV developments and their possible applications in civil engineering. The paper begins with an introduction to UAV hardware, software, and control methodologies. It also reviews the latest developments in technologies related to UAVs, such as control theories, navigation methods, and image processing. Finally, the paper concludes with a summary of the potential applications of UAV to seismic risk assessment, transportation, disaster response, construction management, surveying and mapping, and flood monitoring and assessment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권3호
• /
• pp.576-599
• /
• 2013

Protocol reverse engineering is useful for many security applications, including intelligent fuzzing, intrusion detection and fingerprint generation. Since manual reverse engineering is a time-consuming and tedious process, a number of automatic techniques have been proposed. However, the accuracy of these techniques is limited due to the complexity of binary instructions, and the derived formats have missed constraints that are critical for security applications. In this paper, we propose a new approach for protocol format extraction. Our approach reasons about only the evaluation behavior of a program on the input message from concolic execution, and enables field identification and constraint inference with high accuracy. Moreover, it performs binary analysis with low complexity by reducing modern instruction sets to BIL, a small, well-specified and architecture-independent language. We have implemented our approach into a system called Icefex and evaluated it over real-world implementations of DNS, eDonkey, FTP, HTTP and McAfee ePO protocols. Experimental results show that our approach is more accurate and effective at extracting protocol formats than other approaches.

• International Journal of Automotive Technology
• /
• 제5권1호
• /
• pp.9-16
• /
• 2004

An experimental study was carried out to characterize the spray atomization process of micro-machined port fuel injectors with a piezoelectric atomization device, which can generate pressure pulsations through vibration of a piezoelectric transducer. In this study, several types of micro-machined arrays such as 30∼200-microns of hole arrays were tested. Both a dual-stream and a central-port injectors with micro-machined arrays were tested and compared with normal port fuel injectors. The spray visualization was conducted to characterize overall spray structure and phase Doppler particle analyzer (PDPA) system was used to quantify the droplet size and velocity. In addition, the pressure history was recorded by using digitized signal from pressure transducer. The results showed that modulation is effective to the spray atomization for tested injectors and atomization performance depends on injector design factors, orifice sizes, and frequency and power of the modulator. A number of resonance frequencies of the modulator was modified by injector parameters and temperature. In addition, our results suggested that design of sufficient space among holes is critical to avoid droplet coalescence in the multi-hole micro-machined injectors.

• 대한원격탐사학회지
• /
• 제15권4호
• /
• pp.307-319
• /
• 1999

The aim of this study is to assess the OSMI (Ocean Scanning Multi-spectral Imager), whose central bands are 443nm, 490nm, 510nm, 555nm, 670nm, and 865nm, for agricultural applications. Radiance measurements, used to determine per cent reflectance of canopies and soils, were acquired with spectro-radiometers (Li-1800;330∼1,100nm, GER-SFOV;350∼2,500nm, and MSR-7000; 300∼2,500nm) in situ for crops and indoors for soils. OSMI equivalent bands and their ratio values were prepared(20nm interval for bands 1∼5; 40nm interval for band 6) by averaging spectral reflectance values to the real OSMI bands and analyzed as to crop growth parameters, leaf area index (LAI), total dry matter, and growth index in crops and physiochemical properties in soils. Spectral variations for each growth stage in rice and for crop discrimination in upland crops were significant statistically. In soils, clay and water content, CEC (Cation Exchange Capacity), free iron oxide, and some cation content were correlated with the OSMI equivalent bands. The result of this study shows OSMI wave bands would be promising for agricultural application in terms of spectral information and resolution.

• Journal of Plant Biology
• /
• 제13권3호
• /
• pp.1-16
• /
• 1970

Field studies were conducted with kusabue variety and factorial design of 12 treatments composed of 3 levels, 10 kg, 15 kg and 20 kg of N per 10 a , and 4 levels of 80, 100, 120, and 140 hills per $3.3m^2$ plot in reclaimed slaty area having an average of 0.48% salt concentration. The law of spacing effect was observed in the increase of the number of stems at any application levels of N, and the increased N application exceeding 15 kg N per 10 a did not increase the number of stems in maximum tillering stages. The light recieving efficiency of plant population was greatly reduced by close planting when compared with the effect of increased N applications in heading stage. The spacing effect on the C/F ratio was not noted but was reduced markedly by the increased N applications, accordingly the spacing effect on rough rice yields to the LAI was less than by the increase N application. Closer spacing increased the number of panicle, and non-effective stems, decreased the number of grains per panicle and panicle weight. The increased N applications also increased the number of panicle, reduced the weight of 1,000 grains and the ratio of matured grains. It was recommended to plant 100 hills per $3.3m^2$ with the application of 15 kg N per 10 a in the reclaimed salty area of Korea.

• Steel and Composite Structures
• /
• 제42권1호
• /
• pp.75-90
• /
• 2022

The pointwise equilibrium polynomial (PEP) element considering local second-order effect has been widely used in direct analysis of many practical engineering structures. However, it was derived according to Euler-Bernoulli beam theory and therefore it cannot consider shear deformation, which may lead to inaccurate prediction for deep beams. In this paper, a novel beam-column element based on Timoshenko beam theory is proposed to overcome the drawback of PEP element. A fifth-order polynomial is adopted for the lateral deflection of the proposed element, while a quadric shear strain field based on equilibrium equation is assumed for transverse shear deformation. Further, an additional quadric function is adopted in this new element to account for member initial geometrical imperfection. In conjunction with a reliable and effective three-dimensional (3D) co-rotational technique, the proposed element can consider both member initial imperfection and transverse shear deformation for second-order direct analysis of frame structures. Some benchmark problems are provided to demonstrate the accuracy and high performance of the proposed element. The significant adverse influence on structural behaviors due to shear deformation and initial imperfection is also discussed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.78-78
• /
• 2020

The Se San and Srepok river basins (2S) are the two major tributaries of the Mekong River, both of which originate in the territory of Viet Nam and flow to Cambodia to meet at Stung treng with the Sekong river (originating in Lao PDR) to form the 3S river basin before joining the Mekong mainstream. In the territory of Viet Nam, the 2S river basins are located in the Central Highlands including 5 provinces, arranged by geographical location from north to south namely Kon Tum, Gia Lai, Dak Lak, Dak Nong and Lam Dong. This is a region with a very important strategic position in terms of economy, politics and defense for the whole country with many potential advantages for economic development. However, the limited and vulnerable basin water resources are under the pressure of socio-economic development in line with increasing water demands for various sectors. In order to overcome the water management challenges, a long-term water resources planning has conducted to support the 2S River Basin Committee (RBC) in effective planning and operation as part of the WB Mekong-Integrated Water Resources Management (IWRM) Project. This paper introduces the outline and progress of the river basin planning using analytical DSS toolkits to analyze, evaluate and formulate the planning options.