• Journal of Korean Society of Forest Science
• /
• 제10권1호
• /
• pp.7-16
• /
• 1970

There are 19 species of bamboo in Korea, among which few are of commercial value. The Phyllostachys has wide range of utilization, for sea weed production, industrial production of various bamboo wares, etc. The total export from Chenla-Namdo to some more than ten countries was recorded 204,000,000 won worth in 1969. As civilization develops so does the techniques of bamboo works, and they in turn accelerate the demand for bamboo wood of better quality. In the light of this trend, the author attempted to make bamboo plants to develope a quadragular culm with elaborate design as disired instead of the original round one, with the expectation that it might be widely welcomed by hand workers, interior decorators. Here are some facts found out in this experiment: 1). The greater the diameter of the shoot at the eye level was, the better result was brought, and as shown in Fig. 5 the rate of success was 72% with the shoots of 7.5 cm thick. 2). The shoots of 30 cm in length showed 100% of success, developing into a desired quadrangular culms without fail(See Fig. 6). 3). The intensity of wood fiber increased as time lapsed, without receiving any influence by the weather (See Fig. 7, 8). 4). During the growing, the culm proved to be flexible enough to bend up to 90 degree (See Fig. 9). 5). In an attempt to promote the value of bamboo by decoration, the author tried to impress rectangular indents on the culm. The indention using a qudangular board 1cm smaller in width than the shoot diameter gave 100% success (See Fig. 10). 6). Design experiment was also successful both in coloration and impressing and the resulting designs delicately depended on the kinds of chemicals used and their combination (Table 2) (See Fig. 12, 13, 14). With the above mentioned findings, the author concludes that the mass production of quadrangular bamboo culm is quite a promissing as an new industry to develope bamboo works to a more valuable one. This research was carried out with the research fund provided by the Ministry of Education in 1969.

• Journal of Fashion Business
• /
• 제6권2호
• /
• pp.1-16
• /
• 2002

The need for ready-to-wear clothing increases as the problem comes to arise from the fit of custommade clothing due to the characteristics of middle-aged women's somatotype. At this point of time, a study on the realities of production of custom-made clothing in middle-aged women's clothing business firms is of very greatly significance. Therefore, this study was intended to identify the problem and improvements through the survey research of production of custom-made clothing in middle-aged women's clothing business firms and further present the plan for development of custom-made clothing business. The questionnaire was framed based on the contents extracted from the preliminary questionnaire research for the pattern section chief of each business firm. Collected data were statistically processed using the SPSS 10.0 Windows program. As a result, the following findings were obtained: 1. The target age of the middle-aged women's clothing business firms ranged from more than 45 years to less than 50 years of age. Clothing business firms much made inroads into the ready-to-wear clothing market largely in the 1980s and the 1990s. Their active entry into the custom-made clothing market occurred in the 1970s and the 1980s. 2. In terms of the clothing production method of middle-aged women's clothing firms, some private boutique and designer brand clothing firms entered the clothing market with a focus on custom-made clothing in the beginning of its organization and introduced the production method of ready-to-wear clothing in accordance with changes in production methods and consumers' needs and wants. National brand clothing firms manufactured clothing with a focus on ready-to-wear clothing from the beginning of its organization, but at last they manufactured both partial custom-made and whole custom-made as the problem arose from ready-to-wear clothing. Seeing that their clothing production showed the ratio readyto-wear to custom-made clothing of 2.58:1. And it was found that the manufacture of ready-to-wear and custom-made clothing took into consideration the great difference in the pattern, size and design plan. The research of the clothing production process showed that whole custom-made and partial custommade were distinguished according to whether or not the sample was presented. 3. The ready-to-wear pattern of middle-aged women's clothing firms were used with a focus on the 'patternmaker-developed pattern' and company-developed pattern'. Most clothing businesses produced clothing in 4 to 5 basic sizes, which is found to be insufficient to complement the physical characteristics of middle-aged women with many specific somatotypes. In the pattern of custom-made clothing, the 'pattern of ready-to-wear were applied' or the 'customized pattern was developed'. Actual measurements were most used as the size of custom-made, and accordingly it is predicted that the level of satisfaction is higher with the fit of custom-made clothing than that of ready-to-wear. The selling place and the head office showed the similar percent as the place for measuring the size of custom-made clothing. Size measurers were mostly the shop master. And it was found that most clothing business firms had a problem when the measured size was applied to the pattern. Accordingly, it is necessary to provide education on size measurement for shop masters. 4. It was found that in the middle-aged women's clothing firms, the pattern correction of the length of sleeve, jacket and slacks occupied the highest percent. Accordingly, it is necessary to provide for the size system to complement the accurate somatotype characteristics of middle-aged women. 5. In custom-made clothing customer management, most firms engaged in customer somatotype management through size management. They provided customers with commodity information by informing them of the sales and event period and practiced human management for customers by maintaining the get-together and friendly relationship. 6. Middle-aged women's clothing businesses responded that it would be necessary to improve the fit of custom-made clothing and complement their pursuit for individuality as the plan to improve its quality. In consequence, it suggests that middle-aged women's clothing businesses should provide middle-aged women with the clothing of better-suited size and refined design. Middle-aged women's clothing businesses responded that it was the most urgent task to form the custom-made clothing manufacturing team as the plan to expand the custom-made clothing market, which is identified as their emphasis on the systematized production of custom-made clothing.

• Journal of the Korean Institute of Landscape Architecture
• /
• 제44권6호
• /
• pp.40-50
• /
• 2016

The objective of this study is to suggest basic data for establishing future urban agriculture vitalization policies, by analyzing the preference of urban agriculture types in accordance with lifestyle as the standard of living for urban residents is improved. A survey was conducted targeting residents of nine autonomous regions that have established grounds for supporting the urban agriculture vitalization by enacting an urban agriculture ordinance, among 25 autonomous regions of Seoul. It aimed to verify a causal relationship between lifestyle and preferred activity of urban agriculture. In the results of the study first, a 'Health pursuit-type' was significant within the 'urban type' urban agriculture. These urban residents, pursuing safe food and health, actively participated in urban agriculture educational programs, and also preferred urban agricultural activities such as planting plants, landscape crops for the improvement of natural scenery in the downtown, and also participating in urban agriculture fairs. Second, 'Leisure activity-type' was significant with the 'House advantage type' urban agriculture. Urban residents mostly emphasizing hobby and leisure activities preferred the 'House advantage type' urban agricultural activities such as tending a vegetable garden in indoor life or using the veranda space of an apartment. Third, 'Health pursuit-type' was significant with the 'Schooling type' urban agriculture and 'Farm and Park type' urban agriculture. Urban residents pursuing health preferred tending an educational-type vegetable garden and educational farm connected to schools, running private farms outside of the downtown, and actively participating in urban agriculture park. Fourth, 'The neighborhood type' was significant with the 'Schooling type' urban agriculture. 'The neighborhood type' urban residents preferred actively participating in diverse urban agriculture education activities. The significance of this study is to examine the tendency and preferred activities of end users of urban agriculture by suggesting the necessity of viewing urban agriculture from the aspect of a consumer, and then examining the influential relationship between lifestyle and preference of urban agriculture-types.

• Korea Journal of Hospital Management
• /
• 제7권1호
• /
• pp.41-63
• /
• 2002

The purpose of this study is to analyze the interrelation of influential factors in organizational conflict and organizational commitment. The data for this study were collected through a self-administered survey with a structured Questionnaire to 1,167 subjects from several nursing staff members, administration staff members and medical technicians of six hospitals. In this analysis frequency test, t-test, ANOVA, hierarchical multiple regression and structural equation model were used. The main findings of this study are as follows. 1. Factors which influence organizational conflict were analyzed. The type of occupation and the year of service were socio-demographic variables which influenced organizational conflict positively. Adjusted R square was 0.03. Perceptions on organizational structure and organizational culture were analyzed with two- level variables that were added. The findings were as follows. Adjusted R square increased to 0.25. The year of service, internal process culture and rational goal culture were positive variables. The design of organizational structure, human relations culture and open system culture were negative variables. 2. Variables which influence organizational commitment were analyzed. Age and the year of service were positive variables, while academic background based on high school education was a negative variable. Adjusted R square was 0.16. Perceptions on organizational structure and organizational culture were analyzed with two-level variables that were added. The findings were as follows. The characteristics of organizational structure, human relations culture and organizational culture were positive variables. Adjusted R square increased to 0.55. The variables of organizational conflict were added in 3 steps. Findings were as follows. The variables of hierarchical conflict showed negative influence and were included in two-level influential variables. Adjusted R square increased to 0.56. 3. Structural equation model was analyzed in order to examine the relation between organizational structure and the variables of organizational culture, organizational conflict and organizational commitment. Thirteen path coefficients out of seventeen path coefficients were significant. Age had negative influence on organizational conflict and positive influence on organizational commitment. The year of service had positive influence on organizational conflict and organizational commitment. The design of organizational structure, human relations culture and open system culture had negative influence on organizational. conflict. They had positive influence on organizational commitment. Internal process culture and rational goal culture had positive influence on organizational conflict. Organizational conflict had negative influence on organizational commitment. The squared multiple correlation of this model was 25.1% in organizational conflict and 52.7% in organizational commitment. The conclusion of this study is as follows. Factors in organizational structure and organizational culture, rather than socio-demographic factors, had a stronger influence on the organizational conflict and organizational commitment of hospitals. In order to decrease organizational conflict, to increase organizational commitment and to maximize the effectiveness of hospital management, it is necessary to understand the overall relation between organizational structure, organizational culture, organizational conflict and organizational commitment, with the effort of improving personalized factors and individual factors of organization management.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• 제27권7호
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Archives of design research
• /
• 제19권2호
• /
• pp.73-80
• /
• 2006

The main purpose of this study is to help develop the productional system of the three dimensional digital animation domestically. Many 30 digital animation projects are being developed and finished with foreign computer graphics technology. However, the 3D animation market in Korea is not as good as the ones in other countries. One of the most significant problems is the lack of a program of study in Korea concerning productional systems used to create 3D animation. We previously imported an advanced productional system from the U.S., which was adaptable to big projects, and consequently, expanded the international digital animation market. Now, we need to develop a new production system which is fully adaptable to the Korean market. A non-sequential system of 3D digital animation tailored for small projects is more adaptable to domestic industry than the sequential system known as the 'Pipeline system.' A non-sequential system is good for small productions that are trying to create animation on a limited budget. The workers in this system can learn to make animation fast and effectively. They can also learn how to discuss with the others in order to avoid duplication of action. In contrast, in the Pipeline System, many workers repeat confirmation steps during the process for the same animations. The benefit of the non-sequential system is that the worker's interest and education can speed up production, because he/she can quickly learn every step of the animation process instead of just doing a particular job which does not allow him/her to observe the other steps involved. The 'animatic' step is the most important in the non-sequential system. The final animation is produced from the animatic. It is developed from scratch through to the final product but only after the agreement of all the workers, including a director.

• Journal of Preventive Medicine and Public Health
• /
• 제16권1호
• /
• pp.163-192
• /
• 1983

In order to facilitate the Korean government's efforts in integrating family planning and maternal & child health at the primary health care level (or township level), the Soon Chun Hyang College of Medicine, with the financial and technical assistance of WHO, has under-taken a service research project. The project has employed a quasi-experimental study design introducing interventions tat provide crucial factors lacking in the ongoing government programs such as midwives and qualified referral physicians. The study is being conducted in three locations, one control area and two study areas. Before introducing trained Nurse/Midewives into the study areas, a baseline prevalence survey was undertaken from 15 July 1981 to 10 August 1981 in selelcted townships of Seosan County. In this sample survey of bath the study and control areas, 2,484 eligible women (97% reponse rate) were interviewed to obtain benchmark data on basic evaluation indicators related to family planning and maternal and child health. The salients results were summarized as follows.: 1. CONTACT RATES WITH HEALTH WORKERS; During the year preceding the survey, 12% of women were visited by government health workers. The primary reason for such visits by health workers was family planning (45% of the visits). About 34% of the women visited the health centers during the year. The primary reason for visiting health centers was immunizations for their children (45% of the visits). 3. FAMILY PLANNING USE RATE; The baseline data showed little difference between women in the study area and the control area on contraceptive use. Approximately 59% were currently using some methods. However, among those current users, almost half were practicing less effective methods of birth control such as rhythm or withdrawal. Among other methods, the tubectomy was the most popular (16%), while use of the IUD, oral pill and condom together reached only 14%. 3. PRENATAL CARE RATE; About 75% of the women reported no prenatal care for their last births (the youngest child of each women), Additionally, among women received prenatal care, over half had only one visit. 4. ATTENDANCE AT DELIVERY; Most of the women surveyed (over 80%) were attended by a non-medical person during their last delivery. These figures are somewhat comparable to the national figure of 84% for remote areas. 5. POSTNATAL CARE; The proportion of women reporting postnatal care was only 4.5%, and postnatal care was not received by the majority of women surveyed. 6. CHILD HEALTH CARE: In contrast to the low rate of maternity care for women themselves, most women reported obtaining immunization care for their children. About 75% of the women obtained Polio and/or DPT, 58% BCG, and 44% Measles vaccine for their children. However, in terms of illness care, while 35% of the women stated that their youngest child had been sick during the month preceding the survey, only 28% of these women took their child to the clinic for treatment. 7. COMPLICATIONS OF PREGNANCY AND DELIVERY AND ABNORMALITIES IN THE NEWBORN; Among all last deliveries, 18% of the women had pregnancy complications and 9% of the women had complications during delivery About 5% of the women reported abnormality in their most recent newborn. 8. REPRODUCTION EFFICIENCY; PERINATAL MORTALITY AND INFANT MORTALITY Based on data from the pregnancy history in this survey, reproduction efficiency was estimated. Out of the 11,154 pregnancies reported by all women surveyed, foetal loss was 21% (almost 16% were induced abortions) and infant deaths before reaching one year old were 3.1%. The reproduction efficiency was, therefore, reduced to 76%. In terms of perinatal and infant mortality rates, the former was 40.2 per 1,000 total births and the latter was 39.3 per 1,000 live births. Both rates described J shaped relationships with age of mothers and parity, and they were also correlated with birth interval and mother's education. In summary, this baseline survey data indicated a need for (1) improving contraceptive practices with more effective methods to prevent unwanted pregnancies and (2) providing better services for maternal and child care to protect wanted pregancies. In the Korean rural setting. the author believes that the latter is more important as the value of each child has increased as a result of the family planning campaign for the past two decades. This calls for more effective integration of Family Planning and MCH programmes to meet the needs of the family in each stage of the child bearing and rearing period with deploying more qualified personnel than the current government program personnel.

• Korean Journal of Heritage: History & Science
• /
• 제56권2호
• /
• pp.172-203
• /
• 2023

<Cheongdamdo>(true-view landscape painting) was identified in this study to be a folding screen painting painted by Jeong Seon(a.k.a. Gyeomjae, 1676~1759) in the 32nd year of King Yeongjo(1756) while exploring the Cheongdam area located in Mt. Bukhansan near Seoul. Cheongdam Byeol-eop(Korean villa), consisting of Waunru Pavilion and Nongwolru Pavilion, was a cultural and artistic base at that time, where Nakron(Confucian political party) education took place and the Baegak Poetry Society met. <Cheongdamdo> is a painting that recalls a period of autumn rainfall in 1756 when Jeong Seon arrived in the Cheongdam valley with his disciple Kim Hee-sung(a.k.a. Bulyeomjae, 1723~1769) and met Hong Sang-han(1701~1769). It focuses on the valley flowing from Insubong peak to the village entrance. The title has a dual meaning, emphasizing "Cheongdam", a landscape feature that originated from the name of the area, while also referring to the whole scenery of the Cheongdam area. The technique of drastically brushing down(刷擦) wet pimajoon(hanging linen), the expression of soft horizontal points(米點), and the use of fine brush strokes reveal Jeong Seon's mature age. In particular, considering the contrast between the rock peak and the earthy mountain and symmetry of the numbers, the attempt to harmonize yin and yang sees it regarded as a unique Jingyeong painting(眞境術) that Jeong Seon, who was proficient in 『The Book of Changes』, presented at the final stage of his excursion. 「Cheongdamdongbugi」(Personal Anthology) of Eo Yu-bong(1673~1744) was referenced when Jeong Seon sought to understand and express the true scenery of Cheongdam and the physical properties of the main landscape features in the villa garden. The characteristics of this garden, which Jeong Seon clearly differentiated from the field, suppressed the view of water with transformed and exaggerated rocks(水口막이), elaborately creating a rain forest to cover the villa(裨補林), and adding new elements to help other landscape objects function. In addition, two trees were tilted to effectively close the garden like a gate, and an artificial mountain belt(造山帶), the boundary between the outer garden and the inner garden, was built solidly like a long fence connecting an interior azure dragon(內靑龍) and interior white tiger(內白虎). This is the Bibo-Yeomseung painting(裨補厭勝術) that Jeong Seon used to turn the poor location of the Cheongdam Byeol-eop into an auspicious site(明堂). It is interpreted as being devised to be a pungsu(feng shui) trick, and considered an iconographic embodiment of ideal traditional landscape architecture that was difficult to achieve in reality but which was possible through painting.

• Journal of Korean Dental Hygiene Science
• /
• 제7권1호
• /
• pp.69-81
• /
• 2024

Background: This study aimed to investigate the association between physical activity and periodontitis based on depression status in a representative sample of Korean adults. Methods: A total of 12,689 subjects who participated in the 7th Korea National Health and Nutrition Examination Survey (2016-2018) were examined. Depression was defined as a PHQ-9 score ≥ 10. Periodontal status was assessed using the community periodontal index, with periodontitis defined as a code ≥ 3. Physical activity categories were divided into a physical activity group and a non-physical activity group, considering the number of days and minutes spent on moderate and vigorous activities. Moderate activity was defined as causing slight breathlessness or a slightly elevated heart rate, while vigorous activity was defined as causing significant breathlessness or a rapid heart rate. Multivariable logistic regression analyses were adjusted for sociodemographic variables (age, sex, education level, and household income), oral and general health behaviors (use of floss and interdental proximal brush, current smoking), and systemic health status (diabetes and hypertension). All analyses utilized a complex sampling design, and subgroup analysis was performed to estimate associations stratified by depression (PHQ-9 ≤ 9 and ≥ 10). Results: Multivariable regression analysis revealed that among participants with depression, those who did not engage in physical activity were 2.65 times more likely to have periodontitis (odds ratio = 2.65, 95% confidence interval = 1.17-6.01). Conclusion: The study findings suggest that individuals who participate in any form of physical activity may be significantly less likely to develop periodontitis, particularly within the group experiencing depression.

• Journal of Global Scholars of Marketing Science
• /
• 제20권1호
• /
• pp.59-69
• /
• 2010

Green or an environmental consciousness has been a major issue for businesses and government offices, as well as consumers, worldwide. In response to this movement, the Korean government announced, in the early 2000s, the era of "Green Growth" as a way to encourage green-related business activities. The Korean fashion industry, in various levels of involvement, presents diverse eco-friendly products as a part of the green movement. These apparel products include organic products and recycled clothing. For these companies to be successful, they need information about who are the consumers who consider green issues (e.g., environmental sustainability) as part of their personal values when making a decision for product purchase, use, and disposal. These consumers can be considered as eco-sumers. Previous studies have examined consumers' purchase intention for or with eco-friendly products. In addition, studies have examined influential factors used to identify the eco-sumers or green consumers. However, limited attention was paid to eco-sumers' disposal or recycling behavior of clothes in comparison with their green product purchases. Clothing disposal behaviors are ways that consumer can get rid of unused clothing and in clue temporarily lending the item or permanently eliminating the item by "handing down" (e.g., giving it to a younger sibling), donating, exchanging, selling, or simply throwing it away. Accordingly, examining purchasing behaviors of eco-friendly fashion items in conjunction with clothing disposal behaviors should improve understanding of a consumer's clothing consumption behavior from the environmental perspective. The purpose of this exploratory study is to provide descriptive information about Korean eco-sumers who have ecologically-favorable lifestyles and behaviors when buying and disposing of clothes. The objectives of this study are to (a) categorize Koreans on the basis of clothing disposal behaviors; (b) investigate the differences in demographics, lifestyles, and clothing consumption values among segments; and (c) compare the purchase intention of eco-friendly fashion items and influential factors among segments. A self-administered questionnaire was developed based on previous studies. The questionnaire included 10 items of clothing disposal behavior, 22 items of LOHAS (Lifestyles of Health and Sustainability) characteristics, and 19 items of consumption values, measured by five-point Likert-type scales. In addition, the purchase intention of two eco-friendly fashion items and 11 attributes of each item were measured by seven-point Likert type scales. Two polyester fleece pullovers, made from fabric created from recycled bottles with the PET identification code, were selected from one Korean brand and one US imported brand among outdoor sportswear brands. A brief description of each product with a color picture was provided in the survey. Demographic variables (i.e., gender, age, marital status, education level, income, occupation) were also included. The data were collected through a professional web survey agency during May 2009. A total of 600 final usable questionnaires were analyzed. The age of respondents ranged from 20 to 49 years old with a mean age of 34 years. Fifty percent of the respondents were males and about 58% were married, and 62% reported having earned university degrees. Principal components factor analysis with varimax rotation was used to identify the underlying dimensions of the clothing disposal behavior scale, and three factors were generated (i.e., reselling behavior, donating behavior, non-recycling behavior). To categorize the respondents on the basis of clothing disposal behaviors, k-mean cluster analysis was used, and three segments were obtained. These consumer segments were labeled as 'Resale Group', 'Donation Group', and 'Non-Recycling Group.' The classification results indicated approximately 98 percent of the original cases were correctly classified. With respect to demographic characteristics among the three segments, significant differences were found in gender, marital status, occupation, and age. LOHAS characteristics were reduced into the following five factors: self-satisfaction, family orientation, health concern, environmental concern, and voluntary service. Significant differences were found in the LOHAS factors among the three clusters. Resale Group and Donation Group showed a similar predisposition to LOHAS issues while the Non-Recycling Group presented the lowest mean scores on the LOHAS factors compared to the other segments. The Resale and Donation Groups described themselves as enjoying or being satisfied with their lives and spending spare-time with family. In addition, these two groups cared about health and organic foods, and tried to conserve energy and resources. Principal components factor analysis generated clothing consumption values into the following three factors: personal values, social value, and practical value. The ANOVA test with the factors showed differences primarily between the Resale Group and the other two groups. The Resale Group was more concerned about personal value and social value than the other segments. In contrast, the Non-Recycling Group presented the higher level of social value than did Donation Group. In a comparison of the intention to purchase eco-friendly products, the Resale Group showed the highest mean score on intent to purchase Product A. On the other hand, the Donation Group presented the highest intention to purchase for Product B among segments. In addition, the mean scores indicated that the Korean product (Product B) was more preferable for purchase than the U.S. product (Product A). Stepwise regression analysis was used to identify the influence of product attributes on the purchase intention of eco product. With respect to Product A, design, price and contribution to environmental preservation were significant to predict purchase intention for the Resale Group, while price and compatibility with my image factors were significant for the Donation Group. For the Non-Recycling Group, design, price compatibility with the factors of my image, participation to eco campaign, and contribution to environmental preservation were significant. Price appropriateness was significant for each of the three clusters. With respect to Product B, design, price and compatibility with my image factors were important, but different attributes were associated significantly with purchase intention for each of the three groups. The influence of LOHAS characteristics and clothing consumption values on intention to purchase Products A and B were also examined. The LOHAS factor of health concern and the personal value factor were significant in the relationships with the purchase intention; however, the explanatory powers were low in the three segments. Findings showed that each group as classified by clothing disposal behaviors showed differences in the attributes of a product, personal values, and the LOHAS characteristics that influenced their purchase intention of eco-friendly products. Findings would enable organizations to understand eco-friendly behavior and to design appropriate strategic decisions to appeal eco-sumers.