• Korean Journal of Ecology and Environment
• /
• v.40 no.1
• /
• pp.1-13
• /
• 2007

The use of aquatic species in ecotoxicity research is well established in developed countries. However, there are limitations of using the species that are not native to Korea, and the toxicity data produced by domestic test species are significantly needed to reflect the domestic situation. The purpose of this study was to investigate the domestic species that can be applicable for the aquatic toxicity assessment in Korea. Aquatic toxicity data were collected in the framework of the project 'Development of integrated methodology for evaluation of water environment' to obtain a range of test species used for aquatic toxicity assessment internationally. The test species collected were evaluated in terms of domestic distribution based on the reliable references and the advices of experts. We figured out the 71 test species native to Korea. They included 7 fish, 26 invertebrates (2 annelids, 2 bryozoa, 13 crustaceans, 3 insects, 4 mollusc, 1 platyhelminth, and 1 protozoan), 26 plants (9 diatoms, 14 green algae, 3 macrophytes), and 12 others (2 amphibians, 3 bacteria, 6 blue-green algae, and 1 fungus). The result of this study should be a very useful information for ecotoxicity assessment in aquatic ecosystem, especially in choosing the test species applicable for the ecotoxicity in Korea hereafter.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.514-522
• /
• 2020

To understand the ecotoxicological differences between representative Skeletonema sp. and Dunaliella tertiolecta, both producers as international standard test species for marine ecotoxicity testing, we compared each standard test method, and comparatively analyzed the suitability of the species for environmental assessment and their sensitivity to various test substances. Although most of the test conditions were the same in each method, there were differences in limitation of pH changing and the initial inoculation density in the validation criteria, which is supposed to originate from the low growth rate of D. tertiolecta. In terms of suitability, both species showed consistency in test performance by repeatedly meeting the validation criteria required by the standard test methods. The salinity ranges available for testing were 20 and 10 psu for Skeletonema sp. and D. tertioelecta, respectively. Finally, regarding sensitivity, the toxicity sensitivity of Skeletonema sp. was relatively higher than that of D. tertiolecta for the reference toxicant, actual polluted water discharged (ballast water), and other chemicals. This implies that using at least two species of microalgae from different classification groups could help increase the reliability and objectivity of test results in the performance of marine ecotoxicity tests using producers.

• Korean Journal of Environmental Biology
• /
• v.34 no.2
• /
• pp.116-123
• /
• 2016

The ecotoxicity tests for metal plating wastewater were conducted using Daphnia magna (D. magna) and Euglena agilis (E. agilis). Evaluation for sources of toxicity was performed by 1) Correlation analysis between the concentration of individual metals in the metal plating wastewater and the toxic effects on D. magna, 2) Toxicant identification evaluation methods including graduated pH method, EDTA procedure and sodium thiosulfate procedure, 3) Comparison of toxic effect value ($EC_{50}$ or $LC_{50}$) of individual metal on D. magna and it's concentration in the metal plating wastewater. To evaluate the possibility of E. agilis, a Korean domestic organism, as a test model organism for metal plating waste water, E. agilis toxicity test was also assessed using on-line euglena ecotoxicity system (E-Tox system). Based on toxicant characterization test using D. magna, it was expected that SS, oxidants and heavy metals are responsible for toxicity of metal plating waste water. Especially Cu, Hg, and Ag were the major cationic metals that caused toxicity. E. agilis is less sensitive than D. magna based on the $EC_{50}$ value however it shows prompt response to toxic test substances. E. agilis shows even a significant effect on the cell swimming velocity within 2 min to toxic metal plating wastewater. Our study demonstrates that E. agilis test can be a putative ecotoxicity test for assessing the quality of metal plating waste water.

• Korean Journal of Environmental Biology
• /
• v.34 no.2
• /
• pp.124-131
• /
• 2016

The toxic responses of flagellate Euglena agilis Carter to 8 heavy metals (Ag, Cd, Cr (VI), Cu, Hg, Ni, Pb, Zn) were measured using E. agilis system (E-Tox), an automated biomonitoring system. The E-Tox measures cell movement parameters, such as velocity, motility, and forms of the cells, as biological endpoints. $EC_{50}$ values from the E. agilis biomonitoring test were compared with the literature data from the tests with Daphnia magna, Vibrio fischeri and Euglena gracilis. Measurement of the E. agilis movement behavior and D. magna acute toxicity test were also conducted for the wastewater samples. E. agilis is less sensitive than D. magna but is comparable to or more sensitive than V. fischeri and E. gracilis for the heavy metals tested in this study. E. agilis shows prompt changes of these parameters for the toxic metal plating wastewater. Major advantages of the E-tox are automatic, easy to handle and fast ecotoxicity monitoring system compared to other biological test systems. These results imply that E. agilis biomonitoring test using E-Tox can be a putative ecotoxicity test as a good early warning tool for the monitoring of toxic wastewater.

• Korean Journal of Environmental Biology
• /
• v.35 no.4
• /
• pp.662-669
• /
• 2017

This study evaluated the ecotoxicological properties of livestock waste water treated by a LID (Low Impact Development) system, using a mixture of bio-reeds and bio-ceramics as suitable bed media for a subsequent treatment process of a livestock wastewater treatment plant. The relationship between the pollutant reduction rate and the ecotoxicity was analyzed with the effluents from the inlet pilot plant, with vegetated swale and wetlands and the batch type of an infiltration trench. Each pilot plant consisted of a bio process using bio-reeds and bio-ceramics as bed media, as well as a general process using general reeds and a bed as a control group. The results indicated that, after applying the HRT 24 hour LID method, the ecotoxicity was considerably lowered and the batch type pilot plant was shown to be effective for toxicity reduction. The LID method is expected to be effective for water quality management, considering ecotoxicity by not only as a nonpoint source pollution abatement facility but also, as a subsequent treatment process linked with a livestock manure purification facility. It is necessary to take the LID technic optimization study further to apply it as a subsequent process for livestock wastewater treatment.

• Environmental Analysis Health and Toxicology
• /
• v.25 no.1
• /
• pp.19-26
• /
• 2010

Discharged materials from the point or non-point source are released into the sea, and as the results, marine environment is directly affected. We must estimate the impacts of contaminants to marine pollution rapidly and accurately. Therefore, it is needed on early warning system for appreciating marine environmental impacts, and required a bioassay to evaluate abnormal changes. A bioassay test was developed to examine the effects of heavy metal contaminants on the early life stages of the marine annimals. We have studied the effects of metals on early development of a sea urchin species, Strongylocentrotus intermedius. S. intermedius embryos were tested with six metals (Cu, Ag, Zn, Cd, Cr, Ni) and showed the highest sensitivity to Cu as well as the lowest sensitivity to Cd. The order of biological impact for metals was Cu>Ag>Ni>Zn>Cr>Cd. In accordance with the results, sea urchins embryos can provide biological criteria for seawater quality assessment. The sensitivity of developmental bioassay whith S. intermedius is at intermediate level among marine organisms commonly used in aquatic bioassays. And this sea urchin can be routinely employed as a test organism for ecotoxicity assays.

• Journal of Environmental Health Sciences
• /
• v.33 no.5
• /
• pp.392-396
• /
• 2007

Aquatic ecotoxicity of bisphenol A, a well-known endocrine disrupter in mammals, was studied using laboratory-reared Daphnia magna as a test organism. The static acute 48 h $EC_{50}$ of bisphenol A for daphnid neonates(<24 hold) was 12.9 mg/l and 110 h $LC_{50}$ values of bisphenol A for daphnid embryos of different ages after deposition into the brood chamber increase with ages in the range of 1.55 mg/l-8.91 mg/l. Also, 48 h $EC_{50}s$ generally increase with daphnid's ages in the range of 12.9 mg/l-19.8 mg/l. In the acute toxicity tests using mature daphnids, the lethal response and immobility all showed good concentration-response relationship with exposure concentration and exposure time, showing little difference between lethality and immobility. These results clarify that acute toxicity tests, using daphnid and its embryo, could also be useful tools easily available for the assessment of ecotoxicity of various harmful chemicals.

• Journal of Environmental Science International
• /
• v.16 no.1
• /
• pp.55-63
• /
• 2007

There are concerns that chemical residues could harm the consumer on the environment, although 50 to 80% of the crops would be destroyed by pests and others without agrochemicals. Environmental fate and ecotoxicity studies are usually carried out to assess the impact on the human and the environment. A comparision of the Daphnia magnia and Simocephalus mixtus toxicity was performed to study the relative sensitivities and discrimination abilities to agriculture chemicals. The species of Simocephalus mixtus was more sensitive to agriculture chemicals than Daphnia magnia. Simocephalus mixtus was approved to be a water flea in determining insecticide and pesticide toxicity by heart-beat rate in a consistency and repeatability. The order of acute toxicity to water flea Daphnia magnia for ecotoxicity test was carbaryl>benomyl>amtirole with both Daphnia magnia and Simocephalus mixtus. The heartbeat pattern after the exposure to agrochemicals was different from that of exposure to heavy metals. Agrochemical leathal concentration test with heartbeat rate measurement was found to be more appropriate than inhibition concentration test with respect to toxicological endpoint.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.517-523
• /
• 2006

The sustainable development is a key issue in the whole field of economy, culture and society, which can be accomplished by the improvement of environment. Recently, life cycle assessment(LCA) has been applied to reduce environmental impacts preliminarily by evaluating the environmental performance of a product through its life cycle. In this study, life cycle assessment was performed to analyze quantitatively the environmental impact on the interior panel of electric motor unit(EMU). As a result, the interior panel with aluminum showed the most global warming(GW), while that with phenol and plastic showed high fresh water aquatic ecotoxicity(FAET) and marine water aquatic ecotoxicity(MAET), respectively. Global warming was occurred mainly due to the emission of $CO_2$ by energy consumption. FAET and MAET were caused by the pollutants released from acid-washing and paints coating process. Therefore, an environmental-friendly EMU can be designed considering the environmental impacts of interior panel.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.524-531
• /
• 2006

Environmental problem is one of important global issues. Transportations are main pollutant emission sources. Although railroad is stilt an environmental-friendly transportation, its environmental impact has been increased continuously. Especially, because a large amount of environmental impact is released from vehicles and facilities, it is necessary to assess and to reduce their environmental impact. Life cycle assessment (LCA) is a representative method which can evaluate environment impact through the whole life cycle of a product or a process. In this study, the environmental impact of seat in the electric motor unit (EMU) was analyzed quantitatively with its material using lift cycle assessment (LCA). As a result, the characteristics of environmental impact were investigated differently with the material of seat. Among ten impact categories, the seat with aluminum and FRP showed the highest ozone depletion (OD). On the other hand, in the seat with stainless steel and plastic, fresh water aquatic ecotoxicity (FAET) and marine water aquatic ecotoxicity (MAET) were high relatively. Therefore, the parts of EMU must be selected considering the characteristics of environmental impact in future.