• New & Renewable Energy
• /
• v.4 no.2
• /
• pp.52-60
• /
• 2008

More people have become interested in hybrid vehicles - which have been heralded as environmentally friendly automobiles - recently as the opening of domestic hybrid vehicle market draws near. Since gasoline, diesel and LPG hybrid vehicles will be produced, a need exists to conduct economic feasibility study of each vehicle type. This research analyzed projected benefits of these hybrid vehicles based on the 1600cc model. There are two categories of benefits: 1) reduced fuel costs for the owners of the vehicles; and 2) reduced environmental pollution cost. We conducted a sensitivity analysis and estimated the domestic consumer fuel costs based on the international oil prices of 100USD, 150USD, and 200USD per barrel. The analysis showed savings of 2 to 4 million Won in fuel cost and 1 to 2 million Won in environmental pollution cost; therefore, the hybrid vehicles are not economically feasible if they are between 3 to 5 million Won more expensive than the conventional internal combustion engine vehicles.

• The Journal of Fisheries Business Administration
• /
• v.44 no.3
• /
• pp.103-109
• /
• 2013

This paper analyzed that the economic effectiveness of the artificial fish reef project in the Tae-an Marine Ranching. Benefit-cost(B/C) model used to indicate the effects of economic valuation. B/C model is based on the sub-models which are Benefit Cost Ratio(BCR), Net Present Value(NPV) and Internal Ration of Return(IRR). First, the Sum of Incremental Benefit and Cost for total vessel by year in Artificial Fish Reef Area(AFRA) estimated 2,381 million won. And then, using 5.5% discounting rates and the survey data, the sub-models showed economically feasible in the all of analysis and analyzed the results as follows. BCR is 2.66, NPV is 28,014million won, and IRR is 22.78%. In conclusion, these results indicated that the artificial fish reef project in Tae-an Marine Ranching would be increase the income of fishermen as well as fish biomass.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.45-49
• /
• 2001

Many cities and provinces are rapidly depleting landfill spaces. As the result, some municities have adopted to incinerate their municipal solid waste(MSW). The motive behind the choice is that incineration significantly reduces the volume of solid waste in need of disposal, destroys the harmful organic compounds that are present in MSW, and provides an attractive source of alternative energy. Conclusively, the generation of MSW ash is expected to increse in the furture. However, disposing the MSW ash in landfills may not always be an environmentally or an economically feasible solution. This paper addresses the various issues associated with MSW ash and its possible use in construction applications.

• Ocean and Polar Research
• /
• v.39 no.3
• /
• pp.213-219
• /
• 2017

In this study, we analyzed the economic feasibility of the swimming crab (Portunus trituberculatus) fry releasing program in the West Sea of Korea. The catch rate of released fry in 2010, measured by genetic markers, was applied to the economic surplus method to estimate benefits. As a result of our analysis, the B/C ratio, as an indicator of economic evaluation, was determined to be 2.168, which means that the releasing program was economically feasible. And it was shown that the benefits to consumers is six times greater than the benefits to producers, confirming the necessity of the releasing program as a public work.

• Korean Journal of Organic Agriculture
• /
• v.16 no.2
• /
• pp.151-171
• /
• 2008

The objective of this paper is to evaluate the feasibility of exporting Korean organic agricultural products to Japanese market. To achieve the objective, we explored the marketing trend of organic agricultural products in Japan and surveyed marketing dealers and food processors that deal with organic foods. We also analyzed Korean farmers' intention of acquiring organic Japanese Agricultural Standard(JAS) certificate in order to export organic agricultural products. The results show that mini tomato is economically feasible to acquire organic JAS certificate but other agricultural products need more attentions. The results also suggest that the education of production and safety management using the international standards such as Japanese Agricultural Standard should be strengthened by local government to promote export of organic agricultural products. The paper implies that producers acquiring organic Japanese Agricultural Standard should be systematization to get larger scale and to guarantee the stability in export supply.

• Explosives and Blasting
• /
• v.17 no.3
• /
• pp.13-22
• /
• 1999

It Is indispensible to cause vibration, noise and dust to blasting and breaker operations. Since the control of these factors is supposed to be extremely difficult, the claim of compensation for material and mental damages are getting increased. Economically feasible blasting operation with controlling vibration and noise can be achieved by establishment of science-based plan, accurate operation and responsible inspection, and the application of efficient management system. It must also be remarked that the relevant applied without prejudice by the operator, and the law and regulation should be applied without prejudice by the authority concerned. In addition, the public claim against operators should be investigated in detail and the prosecution should be made under the careful onside-ration of scientific and reasonable conception. Finally, it is strongly suggested that the operations, public and authorities should make great efforts to develop higher technology in order to expand our construction market, to overseas.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.607-612
• /
• 2000

Microprecision agriculture for a fully controlled plant factory is proposed in this paper. Microprecision agriculture can be attained by using plant factories to realize profitable alternative agriculture. A closed, fully controlled, plant-growing factory is far better in terms of minimizing all sorts of waste. The limit and optimum design concept has to be applied to establish an economically feasible, fully controlled, plant-growing factory. To achieve this objective, microprecision technologies have to be developed. Microprecision technologies should be involved in sensing, modeling, controlling, and collecting information for the mechatronics for plant production. Basic technologies for microprecision are already available; they are SPA (speaking plant approach to environmental control), AI (artificial intelligence: expert systems, neural networks, genetic algorithms, photosynthetic algorithms etc.), bioinstrumentation, non-invasive measurement, biomechatronics, and biorobotics. A microprecision irrigation system for plug production is an example of a microprecision technology that has actually been implemented in a plug seedling production factory.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.4
• /
• pp.24-29
• /
• 2011

When an emergency light turns on due to a blackout, the intensity of illumination is drastically changed from hundreds [1x] to 1.0[1x]. This sharp change of illumination intensity not only lowers the darkness adaptation of the eye, it also degrades the obstacle cognitive ability of the evacuees, resulting in secondary critical accidents due to anxiety, and fear. Thus, this study proposed a convertible emergency lighting fixture that controls the rate of speed of light in two stages by time with darkness adaptation of the eye in consideration. In addition, the effect of such emergency light is verified by suggesting an illumination simulation without increasing the number of light or capacity of battery to make it economically feasible.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.36-43
• /
• 2003

In this paper, the warm forging process sequence has been determined to manufacture the warm forged product for the precision bevel gear used as the differential gear unit of a commercial automobile. The preform shape of bevel gear influences the dimensional accuracy and stiffness of final product. So, the design parameters related preform shape such as aspect ratio and chamfer length having an influence the formability of forged product are analyzed. Then the optimal conditions of design parameters have been selected by artificial neural network (ANN). Finally, to verify the optimal preform shape, the experiments of the warm forging of the bevel gear have been executed. The proposed method can give more systematic and economically feasible means for designing preform shape in metal forming process.

• New & Renewable Energy
• /
• v.4 no.1
• /
• pp.37-43
• /
• 2008

As the distributed generation becomes more reliable and economically feasible, it is expected that a higher application of the distributed generation units would be interconnected to the existing grids. This paper describes the results for the mechanical and environmental tests of pretreatment system material. Mechanical Characteristics make differences between parent / weldment, Notch existence / non-existence and air/$H_2O$ conditions. As a result, the life of pipe lines needs to maintain and fit for the operating period. Based on actual situations, the tension test of pipe welding-parts is carried out varying the exposure time of hydrogen sulfide and the fatigue resistance test is also performed inserting a notch into the pipe welding part, being exposed to the hydrogen sulfide environment for 720 hours.