• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.111-124
• /
• 2014

Decentralized water supply systems, treating the water in users'vicinity, cutting down the distribution system, utilizing the alternative water resources(rainwater harvesting, water reclamation and reuse and so on.) and saving energy and other resources, could be categorized into POU(Point-Of-Use), POE(Point-Of-Entry) and community small scale system. From the literature review, we could thought that decentralized water supply system and hybrid system(integrating centralized and decentralized water supply system within urban water management) might have strengthening comparative advantages to centralized system with respect to: (1) water security, (2) sustainability, (3) economical affordability. Even though it is difficult to derive and quantify direct benefit advantages from decentralized and hybrid system in comparison with centralized system, (1) operational cost reduction, (2) assurance for safe and stability water supply and (3) greenhouse gas reduction can be expected from successful establishment of the former.

• KCID journal
• /
• v.17 no.2
• /
• pp.3-16
• /
• 2010

The subject of externality of agricultural water supply has been discussed in the OECD AC ( Organization for Economic Cooperation and Development Agriculture Committee) while argued between monsoon Asian developing countries and the agricultural product export nations (Australia, EU, etc). It argued that a 'positive' approach to multifunctionality views agriculture as an economic activity with multiple, interconnected outputs or effects, and a 'normative' approach interprets multifunctionality in terms of the multiple roles assigned to agriculture. and the agricultural product export nations insisted 'negative' approach to externality of agricultural water supply like causing water pollution. So, in this study, define the externalities (positive, negative and economic, environmental) in terms of the agricultural water supply and calculate benefit and cost each the externalities by cost estimation. As results, BC is calculated to 1.28 which means that it is more economical to agricultural water supply and shows that although the negative exernalities comes out while supply the agricultural water, it still more valuable to supply the agricultural water.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.2
• /
• pp.55-60
• /
• 2002

This paper presents a controller for the multiple DC motors using the CAN(Controller Area Network). The controller has a benefit of reducing the cable connections and making the controller boards compact through the network including expansibility. CAN, among the field buses, is a serial communication methodology which has the physical layer and the data link layer in the ISO's OSI (Open System Interconnect) 7 layered reference model. It provides the user with many powerful features including multi-master functionality and the ability to broadcast / multicast telegrams. When we use a microprocessor chip embedding the CAN function, the system becomes more economical and reliable to react shortly in the data transmission. The controller, we proposed, is composed of two main controllers and a sub controller, which have built with a one-chip microprocessor having CAN function. The sub controller is plugged into the Pentium PC to perform a CAN communication, and connected to the main controllers via the CAN. Main controllers are responsible for controlling two motors respectively. Totally four motors, actuators for the biped robot in our laboratory, are controlled in the experiment. We show that the four motors are controlled properly to actuate the biped robot through the network in real time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.6
• /
• pp.77-86
• /
• 2007

The repair technique utilizing surface impregnant is widely used due to its simple construction procedures and economical benefit. Surface protection through this reparing technique cannot increase the bearing capacity of concrete members much but increase the durability performance and service life efficiently. In this study, fundamental tests such as water suction and permeation are performed for concrete specimens with several organic/inorgarnic impregnant and suitable impregnant is selected on the basis of the results. Finally, durability tests such as carbonation, freezing and thawing, and chloride attack are carried out for the concrete specimens with selected impregnant and it is experimentally verified that they have good resistance to deteriorations.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2326-2328
• /
• 1999

Developments of effective and economic diagnostic apparatus for industrial plastic insulated high voltage power cables are in discontented condition still. Some report told that DC high voltage was damaged plastic insulation of a partially aged power cable to lead breakdown easily. But now, we have no alternative tools of DC diagnostic apparatus, and we try to reduce a possibility of hazard DC diagnosis. DC diagnostic apparatus still have many advantages to field cable engineer like low price, portability easy applications and sufficient data. Main hazard of DC diagnosis is excessive hight of applied voltage Recent developments for DC diagnosis use considerably low voltage. But new test methods need special measuring device and manipulator, like high input impedance voltmeter, low leakage current high voltage switches, etc. So that reason, new DC diagnostic devices are normally very expensive and have low efficiency, economically. We try to design a composite test device for 3$\sim$4 newly developed method, have economical benefit th industrial engineer.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.429-435
• /
• 2010

Although recently revised building code requires 15~20% increased thermal insulation performance for window systems, since the code is focusing on winter heat loss, it is not satisfactory to contribute on reducing rapidly rising cooling load in summer. Window systems have great impact on building heat gain and loss. Therefore technological development for window system specialized in shading solar gain in summer is an urgent matter. This study evaluates the performance of sun shading and thermal insulation for blind integrated window system. Also, computer simulation evaluates the effect of heating and cooling energy consumption reduction for an individual unit(floor area of $85m^2$) of a multi-family housing. Physibel Voltra, a heat transfer analysis software, was used to analyse the effect of energy consumption reduction, and the energy load was converted to the cost to compare the actual effect of economical benefit.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.89-92
• /
• 2008

Lecture room, space for student to study, need to get exactly information and show up what students are required So, problems for illuminated environments are low effect of studying, and that students may get weak-sighted. Research is required to get enough lighting for lecture room which students spend most their time. If we compare lighting system for recent college lecture room with computer simulation, lighting system at the lecture room with down light will be improve intensity of illumination. Therefore we can get economical benefit and save energy.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.1
• /
• pp.171-178
• /
• 1999

Despite of decrease in shear and moment strengths, most steel structural designers use web openings in beams because of economical benefit and requirement. The purpose of this study is to suggest the method of reinforcement of H-shape steel beams with a rectangular web opening. If shear predominates over bending, it is necessary to consider all possible combinations of shear force and bending moment acting at the opening. In this paper, the ultimate strength and behavior of perforated beams have been investigated according to parameters (ratio of M/V, opening width within opening height ratio D/h, various reinforcing types A/B/C/D/M/N/W). The results of this study are as follows ; 1. Deformation of H-shape steel beams with a rectangular web opening was greatly affected by not only bending but also shear. 2. SB1-2/3 series have little difference in the reinforced efficiency, but SB1-2E/3E series have difference in the reinforced efficiency according to the reinforcement type. 3. Efficiency of SB1-2E/3E series is determined by reinforcing types, which RB1-2E-B/M/C and RB1-3E-M/D/C specimens have good efficient. Reinforcing type of perforated beams chooses efficient method according to ratio of M/V and D/h.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.6
• /
• pp.560-568
• /
• 2005

The cost accounting of electricity and heat produced from an energy system is important in evaluating the economical efficiency and deciding the reasonable sale price. The OECOPC method, suggested by the author, was applied to a 650 MW combined cycle cogeneration system having 4 operating modes, and each unit cost of electricity and heat products was calculated. In case that a fuel cost is ${\\}400/kg$ and there are no direct and indirect cost, they were calculated as follows; electricity cost of ${\\}23,700/GJ$ at gas-turbine mode, electricity cost of ${\\}15,890/GJ$ at combined cycle mode, electricity cost of ${\\}14,146/GJ$ and heat cost of ${\\}6,466/GJ$ at cogeneration mode, and electricity cost of ${\\}14,387/GJ$ and heat cost of ${\\}4,421/GJ$ at combined cycle cogeneration mode. Further, these unit costs are applied to account benefit on this system. Since the suggested OECOPC method can be applied to any energy system, it is expected to contribute to cost accounting of various energy systems.

• Oral Biology Research
• /
• v.42 no.4
• /
• pp.235-240
• /
• 2018

Standard oral and maxillofacial three-dimensional model was developed with patients' medical data while virtual reality (VR) simulator was developed in conjunction with head mount display (HMD) and Haptic device. The objective of this study was to evaluate the preclinical use of a VR training simulator in tooth preparation practice. Eighty-nine dental students were trained how to operate the simulator. The participants were then given sufficient time on the simulator to practice dental preparation. The students experience and opinion was then taken in through filling of questionnaires. On average content received 1.8 points, anatomy had 2.5 points, 2.6 points for the applicability, and 2.0 for the usability. As for the detailed items scores, queries about the possible development of the simulator and the interest of the learning process through the simulator were the highest at 3.1 and 3.0 points, respectively. Question about the benefit of the HMD and the haptic device during the practice had 1.5 and 1.6 points, respectively. The average total score was 2.2 points. VR tooth preparation simulator in the field of clinical dental education has powerful potential in regard to realistic models, environments, vision, posture, and economical efficiency.