• Economic and Environmental Geology
• /
• v.45 no.4
• /
• pp.351-363
• /
• 2012

In order to develop the evaluation techniques for the potential sulfide ore reserves, the relationships between the modal vol.%, grain sizes and textural characteristics of the constituent minerals (e.g., sulfides, oxides and skarn minerals) and the Spectral Induced Polarization (SIP) phase differences are examined for the nine rock cores collected from the Gagok Pb-Zn skarn deposit. The Gagok Pb-Zn skarn deposit occurs mainly along the intrusive contact between the Cretaceous granitic rocks and Cambrian Myobong slate and Pungchon limestone. The nine rock cores have been grouped into three showing distinctive SIP phase differences: the highest (Group I), intermediate (Group II) and lowest (Group III). In relation with the modal vol.% of minerals, Group I is characterized by higher pyrrhotite (25-38 vol.%) and amphibole (40-55 vol.%); Group II by intermediate pyrrhotite (7-13 vol.%) and higher garnet (44-68 vol.%); and lower pyrrhotite (1-7 vol.%) and higher pyroxene (24-66 vol.%) stand for Group III. Furthermore, the grains of all the major constituent minerals become smaller from Group I (<5 mm) through Group II (<2.5 mm) to Group III (<1.6 mm). In particular, the pyrrhotite contents and their grain sizes show logarithmic correlation with the SIP phase differences, Although we present here the results solely from nine samples, the systematic interrelations especially for pyrrhotite indicate the potential ability of SIP measurements as a new mine-evaluation technique for the sulfide ore reservoir.

• Korean Journal of Social Welfare
• /
• v.61 no.3
• /
• pp.29-54
• /
• 2009

This study is intended to figure out determinants affecting the economic preparations for old age of pastors from major four protestant associations having a church ministerial pension system: the General Assembly of Presbyterian Church in Korea (GAPCK), the Presbyterian Church of Korea (PCK), the Presbyterian Church in the Republic of Korea (PROK), and the Korean Methodist Church (KMC). Thereby, it conducted a survey to 452 pastors from the four religious associations in Korea. The followings sum up the results of this research. First, it was shown that the conventional idea that there is no need for pastors to prepare for their old age or their preparations for old age imply disbelief had been diminished. Second, there were few pastors who had made economic preparations for their old age privately. Third, associations adopting a compulsory church ministerial pension system were PCK, PROK, and KMC indicating a high occupation of more than 75% whereas GAPCK with an optional system showed a very low percentage of 11.5%. Fourth, with regard to the national pension system, the associations except for PROK (61.8%) had more non-enrolled pastors (53.3%), and they responded economic difficulty as the biggest reason for the unenrollment. Fourth, determinants affecting their economic preparations for old age were academic career, total income, church independency, church reserving, and national pension enrollment. Fifth, among the pastors from the four associations, the ones of PROK prepared for their old age best in consideration of GAPCK. According to the results of this paper, the most critical determinant affecting pastors' economic preparations for old age was total income. Pastors with higher income can make church ministerial pension, national pension, and private preparations while the ones with lower income cannot afford for public as well as private preparations; that is, there exists a polarization phenomenon in pastors' economic preparations for old age. Therefore, it is necessary to make devices to narrow the income gap between pastors in religious associations. Second, even in the associations having a compulsory church ministerial pension system, many pastors were not insured, so it is needed to reform or improve the pension system. Third, it is also required to better the national pension system and change the recognition on it.

• Journal of the Korean association of regional geographers
• /
• v.20 no.1
• /
• pp.49-69
• /
• 2014

The theory of creative city can be seen as one that reflects a relationship between recent change of economic environment and socio-spatial reconstruction in the so-called 'cultural turn' to deindustrialization. This paper considers approaching methods to knowledge-based economy or cultural economy as a context of development of theory of creative city, and suggests types of conceptualization of creative city. Then it reviews creative perspectives which can be found in recent domestic and oversea research trends on creative city, especially relating its nature with neoliberalism. Finally this paper discusses critically the concept of creative class as a social constitution of creativity or creative economy, and that of creative city as its spatial constitution. The concept of creative class can be criticized in terms of ambiguity of the concept of class, class-biased and economy-privileged idea, market valorization of culture, individualization against community, normalization of flexible labor market, and uncertainty of economic success of creative city. The concept of creative city can be criticized in terms of limitation of interests to city, ignorance of national and global dimensions, decontextual normative vision, legitimation of neoliberal city, lack of proof of causality between creative class and economic success, polarization of within and between cities.

• Journal of the Economic Geographical Society of Korea
• /
• v.6 no.2
• /
• pp.443-470
• /
• 2003

This study is to consider economic, political, socio-cultural and environmental characteristics of the new urbanization process and its spatial structures and urban policy of Seoul in the 1990s. Some experimental findings which have been identified throughout this study can be summarized as follows. First of all, Seoul, the largest city in S.Korea has experienced a restructuring process of economy, which has been promoted by the development of producer services as well as knowledge- based or high tech industries. Secondly, the autonomy of Seoul has increased after the introduction of local self-government, with relatively higher self-management of local finance than other cities, strengthening the tendency of enterpreneurialism, empowering civil movements, and increasing the political participation of women. Thirdly, in the socio-cultural aspect, the material wants to gain a certain identity through consumption, using urban environments culturally, varying consuming attitudes and ways of leisure times in relation with the rapid development of transportation and information communication. Fourthly, in the environmental aspect, Seoul has tried to introduce the concept of sustainable development in terms of increasing wants on the quality of life, and to develop a pro-environmental eco-city with environmental rehabilitation, constructing green space and eco-park. Finally, in the spatial dimension, Seoul has shown a structuration of multi-centers, with highly spectacular urban landscapes and seemingly authentic urban planning. These results make us confirm that Seoul has been in the process of new urbanization which can be distinguished from the previous one.

• Journal of Technology Innovation
• /
• v.28 no.4
• /
• pp.151-163
• /
• 2020

The routinized tasks in the post-COVID era are to be replaced by digital technologies, while there is a high possibility that digital transformation technologies and non-routinized tasks have strong complementarity. In particular, looking at the job composition within Korea's industries, the intensities of routinized works appear to be continuously rising. It suggests that the potential side effects on the labor market caused by the acceleration of digital transformation in the post-COVID era will be greater within Korean innovation system. With this background, this study aims to provide a conceptual framework for dealing with potential crises such as, job polarization and widening gaps between workers in terms of economic earnings, based on an in-depth understanding of the inherent properties of digital transformation that will lead to structural changes in our economic and social system. In particular, focusing on the interaction between digital transformation technology and learning in the post-COVID era, this study attempts to redefine the role of the innovation policy for making a successful transition to a new equilibrium state. In addition, this study examines the institutional conditions of the Korean innovation system which affect the creative learning activities of economic actors to draw policy implications for establishing future-oriented innovation policy. Based on these approaches, this study highlights the importance of coevolution between the skills demand and skills supply to spur inclusiveness of Korean innovation system in the post-COVID era.

• Korean Journal of Culture and Social Issue
• /
• v.18 no.1
• /
• pp.111-125
• /
• 2012

The total fertility rate of our nation has been in the world's lowest level with constant falling since it reached an all-time low in 1983. The increase in economic participation of women, difficulties to balance work and family life, and traditional gender role and family norms in our society have been blamed for causing low birth rates. In addition, the current economic recession and increased polarization of wealth make it more difficult for working families to balance work and family life, resulting in lowering fertility rates. The Korean government has recently prepared the second five-year basic plan(2011-2015) to deal with low fertility and population ageing. The basic plan aims at providing support for working families in balancing work and family life and helping people ease the burden of marriage, childbirth, and raising their children. The work-family balance policies based on gender equality will do much to increase fertility rates in the future. In this context, this study examined current status and problems of balancing work and family life in our society, the Korean government and corporate policies for work-family balance, and the effects of policies on childbirth. Suggestions for future directions are presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.459-463
• /
• 2017

Hot dip galvanizing in the steel plant is one of the most widely used methods for preventing the corrosion of steel materials including structures, steel sheets, and materials for industrial facilities. While hot dip galvanizing has the advantage of stability and economic feasibility, it has difficulty in repairing equipment and maintaining the facilities due to high-temperature oxidation caused by Zn Fume where molten zinc used in the open spaces. Currently, SM45C (carbon steel plate for mechanical structure, KS standard) is used for the equipment. If a part of the equipment is resistant to high temperature and Zn fume, it is expected to improve equipment life and performance. In this study, the manufactured Ni alloy was tested for its corrosion resistance against Zn fume when it was used in the hot dip galvanizing equipment in the steel plant. Two kinds of materials currently used in the equipment, new Ni alloy and Inconel(typical corrosion-resistant Ni alloy), were selected as the reference groups. Two kinds of molten metal were used to confirm the corrosion of each alloy according to the molten metal. Zn fume was generated by bubbling Ar gas from molten Zn in a furnace($500{\sim}700^{\circ}C$) and the samples were analyzed after 30 days. After 30 days, the specimens were taken out, the oxide layer on the surface was confirmed with an optical microscope and SEM, and the corrosion was confirmed using a potentiodynamic polarization test. Corrosion depends on the type of molten metal.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.209-213
• /
• 2012

Recently, the fuel using in the diesel engines of marine ships has been changed to a low quality of heavy oil because of the steady increase in the price of oil. Therefore, the wear and corrosion in all parts of the engine such as the cylinder liner, piston crown, and spindle and seat ring of exhaust valves has correspondingly increased. The repair welding of a piston crown is a unique method for prolonging its lifetime from an economic point of view. In this case, filler metals with a high corrosion and wear resistance are mainly being used for repair welding. However, often at a job site on a ship, a piston crown is actually welded with mild filler metals. Therefore, in this study, mild filler metals such as CSF350H, E8000B2, and 435 were welded to SS401 steel as the base metal, and the corrosion properties of the weld metals with and without post weld heat treatment were investigated using some electrochemical methods in a 0.1% $H_2SO_4$ solution. The weld metal welded with CSF350H filler metal exhibited the best corrosion resistance among these filler metals, irrespective of the heat treatment. However, the weld metal zones of the E8000B2 and 435 filler metals exhibited better and worse corrosion resistance with the heat treatment, respectively. As a result, it is suggested that in the case of repair welding with CSF350H and 435 filler metals, no heat treatment is advisable, while heat treatment is desirable if E8000B2filler metal is used with repair welding.

• Journal of the Korea society of information convergence
• /
• v.7 no.2
• /
• pp.41-48
• /
• 2014

Capitalism of altitude in modern society has brought a brilliant development of human civilization. But there is a side effect of capitalism. It is just such as alienation of labor, polarization. The need to consider the worker's equal rights to share profits of private companies in the first Korean Constitution of 1948 is to mitigate the adverse effects of this capitalism. It is considered that the present government aims at "economic democracy" slogan and also be matched. The worker's equal rights to share profits of private companies means the distribution rights of workers to receive excess profits of the company. The review of these worker's equal rights to share profits of private companies is thought very meaningful.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.183-194
• /
• 2016

Rural house came into the rapid change through the process of modernization and Saemaul movement in the past. This change continue to the current era, there is a such exotic forms and indiscriminate development of new house and Saemaul housing and existing conventional farmhouse in rural area. Such a phenomenon, ultimately creating disharmony in traditional environment of rural. In this respect, reflecting the location characteristics of the region which is based on the regional characteristics and unique model of rural housing, it is absolutely required for the development of rural housing customized to fit the diversity of modern. With that background, the purpose of the research is to try and find out the changes in rural houses and the transforming characteristics. To achieve this research purpose, this research selected a specialized magazine for architecture. Then, it identified contents which has specific keyword. lastly, it analyze type and contents of house in rural area from selected article. This process make up the rural housing for effective utilization. The result showed that the type of economic activity and residents information directly show the character of the members who located in the new homes after retuning to farming. The polarization of structure was clearly visible by the building time. And, propensity to western-style of major components was very high such as shape and form of housing. However, it was found to prefer to reflect traditional aesthetics in the components of the housing partially. Therefore, more research is needed to reflect of the results of a survey. Also, analyzing the characteristic of rural house's element and suggesting ways to take advantage in order to present suitable element of modern rural house.