• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.156-163
• /
• 2008

Process change and modification, which are caused by process failure, equipment life cycle and economic environment, have been generated in the chemical plants. And the MOC (management of change) base on the reasonable process safety technology such as change judgment, hazard identification by accurate technical references and risk assessment. But it is difficult to carry out the MOC because of lack of experience, shortage of knowledge and none of process safety specialists. In this study, the MOC system which could make enhancement of safety by finding and complementing weakness of MOC in chemical facilities was developed. This developed MOC system based on QRA was recommended the obvious standard for decision-making process, MOC procedure based on risk assessment and risk estimation of the process modification. The study based on the above way sought the enhancement of safety by performing Risk Based MOC for chemical plants.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.459-465
• /
• 2007

This study was conducted to calculate the LCC of a apartment complex with a type of heating system, district heating and cogeneration system. For the purpose of analyzing LCC according to size of apartment complex, 500, 1,500 and 4,000 houses of model apartment selected. This research performs design of heating system and the life cycle cost analysis including an initial cost, energy cost, maintenance and operation cost, replacement cost and renovation cost during the project period(15years). According to the calculated results, 1) Initial cost of cogeneration system with 500, 1500 and 4000 houses is higher than district heating system each of 20%, 13%, 12%. 2) In case of cogeneration system, the payback period by electric generation is 5.21, 4.92 and 4.47 years and saving cost was calculated 29 billion won, 94 billion won and 262 billion won after payback period. 3) Cogeneration system LCC was 1.12, 1.07 and 1.06 times larger than district system with the size of apartment complex. According to the case of this study district heating system is more efficient than cogeneration system in terms of the reduction of LCC. 4) Gas Engine Co-generation System is more efficient than other systems because it can collect progressive part from electric charge progressive stage system. However, the efficiency is decreasing because of raising of fuel bills(LNG) and lowering of power rate for house use. Especially the engine is foreign-made so the cost of maintenance and repair is high and the technical expert is short. 5) District heating is also affected by fuel bills so we should improve energy efficiency through recovering of waste heat(incineration heat, etc.). Also, we should supply district cooling on the pattern of heat using of let the temperature high in winter and low in summer.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.10
• /
• pp.544-551
• /
• 2015

This study was conducted to determine the LCC of apartment complexes with district heating and a cogeneration system. For the purpose of analyzing LCC according to the size of the apartment complex, 500, 1,500, and 4,000-unit model apartments were selected. Analysis was performed on the design of the heating system and the life cycle cost including total construction cost, maintenance and operation cost for the duration of the project period (15 years). According to the calculated results, 1) The initial cost of the cogeneration system for 500, 1,500, and 4,000-unit apartments is higher than that of the district heating system by 20%, 13%, and 12%, respectively. 2) In the case of the cogeneration system, the payback period by electric generation was found to be 5.21, 4.92 and 4.47 years, and saving cost was calculated to be 29 billion won, 94 billion won and 262 billion won after the payback period for 500, 1,500, and 4,000-unit apartments, respectively. 3) The LCC values of the cogeneration system were 1.12, 1.07 and 1.06 times larger than those of the district system according to the size of the apartment complex. In this study, the district heating system was found to be more efficient than the cogeneration system in terms of LCC reduction. 4) District heating is affected by fuel bills, so energy efficiency should be improved through recovering waste heat (incineration heat, etc.). Also, district cooling should be provided according to heat use to keep the temperature high in winter and low in summer.

• Journal of the military operations research society of Korea
• /
• v.35 no.2
• /
• pp.15-31
• /
• 2009

This paper examines several inefficient problems generated from a management process of defense acquisition system, and suggests several alternatives to remedy the current acquisition-related problems. This might help MND to reform the current DAPA's acquisition system. The offered elements are to, first, redefine function of mid-term plan & budget allocation between MND and DAPA, second, devise economic acquisition management and force development to build integrated management system of requirement-acquisition-operation & maintenance, third, build Workforce Management Act(WMA) and Professional Education System(PES) for strengthening expertise and institutionalizing manpower rotation of requirements & acquisition-related fields, fourth, implement weapon systems' Total Life Cycle Systems Management(TLCSM) and improve developmental & operational test and evaluation. These are essential elements in minimizing confusion & conflict emanating from surrounding acquisition program among MND-DAPA-Each Services.

• Journal of KIBIM
• /
• v.5 no.4
• /
• pp.53-62
• /
• 2015

Korea has been at the forefront of green growth initiatives. In 2008, the government declared the new vision toward 'low-carbon society and green growth'. The government subsidies and Feed-in Tariff (FIT) increased domestic usage of solar power by supplying photovoltaic housing and photovoltaic generation systems. Since 2000, solar power industry has been the world's fastest growing source with the annual growth rate of 52.5%. Especially, BIPV(Building Integrated Photovoltaic) systems are capturing a growing portion of the renewable energy market due to several reasons. BIPV consists of photovoltaic cells and modules integrated into the building envelope such as a roof or facades. By avoiding the cost of conventional materials, the incremental cost of photovoltaics is reduced and its life-cycle cost is improved. When it comes to atypical building, numerous problems occur because PV modules are flat, stationary, and have its orientation determined by building surface. However, previous studies mainly focused on improving installations of solar PV technologies on ground and rooftop photovoltaic array and developing prediction model to estimate the amount of produced electricity. Consequently, this paper discusses the problem during a planning and design stage of BIPV systems and suggests the method to select optimal design of the systems by applying the national strategy and economic policies. Furthermore, the paper aims to develop BIM tool based on the engineering knowledge from experts in order for non-specialists to design photovoltaic generation systems easily.

• Journal of the Korean Home Economics Association
• /
• v.31 no.1
• /
• pp.97-120
• /
• 1993

This study is designed to understand marital relationships of the rural couples in Korea. The primary purposes of this study are to examine the relationship between marital satisfaction and role evaluation of the spouse and to construct a path model in which shows the relationships among background variables, role evaluation of the spouse and marital satisfaction. Structured guestionnaires from 435 couples with school-age children and teenagers living in rural area are analyzed in this study. The major findings are as follows : 1. Factor analysis of the role evaluation of the spouse results I 4 factors for both husbands and wives; emotional support-sexual role child socialization-economic role, kinship role and housekeeping role. 2. The most important factor influencing the marital satisfaction is the role evaluation of the spouse o emotional support-sexual relation. While the number of children, and role evaluations of the spouse influence directly on the marital satisfaction of the wives, age, level of education, level of income and husband's occupation influence indirectly through role evaluations of the spouse on that of wives. 3. For husbands, family life cycle and their occupation influence indirectly on the marital satisfaction of the husbands and the marital satisfaction of them is also mediated by role evaluations of the wieves. Level of income of the family not only influences directly on marital satisfaction but influences on it indirectly. 4. Marital satisfaction is mediated by role evaluations of the spouse. The role evaluation of the spouse on emotional support-sexual relation has the most powerful effect on the marital satisfaction for both wives and husbands. About 60 percent of the variance in the marital satisfaction of rural couples can be explained by the role evaluation of the spouse. therefore, the result of the result of the study indicates that the role evaluation of the spouse on emotional support-sexual relation plays a significant part in determining the marital satisfaction of rural couples.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.105-114
• /
• 2006

Together with the trend of enhancement in domestic industrial development and economic progress due to import and export, the demand for construction of the roads, bridges, especially port facilities, and several coastal protection and ocean structures is increasing rapidly. MOMAF of Korean Government is driving construction of 9 new ports and renovation of the existing fishery ports. Among these structures most of bridge base, wharves, dolphins, quays, and jetties are being newly built of steel or concrete pile. As the base, supporting bulkheads, and piles are underwater after construction, it is difficult to figure out the status of structures and not enough to get maintenance and strengthen the structures. Every year, moreover, these works suck the government budget due to higher incomplete maintenance expense for protection from corrosions of structures and increased underwater construction period. for the purpose of cutting down the government budget, it is necessary to extend the life cycle of the existing structures. We developed a new method for maintenance of submerged structures near the waterline by allowing dry work environment with the floating caisson. The method shows easy to move around the working area and handle. It also showed not only a significant reduction of maintenance expenses and time for anti-corrosion work but also better protection. This will be a milestone to reduce the maintenance and construction expenses for the shore and water structures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7893-7901
• /
• 2015

It is important to the periodic collection and analysis of the maintenance and management information of bridges for a more safe and efficient management of the bridges. To enhance the reliability and ease of acquisition of the bridge inspection information that is the basis for a strategy for safe and economic management using the bridge management system (BMS), this study develops a smart phone application for bridge inspection and ensures the actual applicability of the application. The developed application that is linked with the BMS for life-cycle management of bridges is possible to real-time query, modify and transmit of the maintenance-related information, and the application is able to greatly relieve the time and cost for the bridge inspection through the automatic creation of site inspection reports. The proposed method using the application is directly or indirectly expected to be very high effects of value improvement, such as ease of use, improved accuracy, sustainability of information, and future utilization, compared to conventional inspection method.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.4
• /
• pp.453-458
• /
• 2011

BACKGROUND: Coleosporium plectranthi, an obligate parasite, which is responsible for the rust disease of Perilla frutescens, a plant in Korea, commonly known as Perilla. All rusts are obligate parasites, meaning that they require a living host to complete their life cycle. They generally do not kill the host plant but can severely reduce growth and yield. Food and feed spoilage fungi cause great economic losses worldwide. It is estimated that between 5 and 10% of the world food production is wasted due to fungal deterioration. Rust disease of Perilla is highly frequent and is widely spread in Korea. The present study was designed to investigate a novel media for the urediniospore germination in vitro and anti-rust activity as well as GC-MS analysis of oak pyroligneous liquor. METHOD AND RESULTS: Urediniospores were collected from the infected leaf of Perilla. Spore suspension was made and the suspension was inoculated in the 2% water agar media with proper humidity, then they were incubated at $26^{\circ}C$ for 56 hrs. The GC-MS analysis of the oak pyroligneous liquor was also done to check the chemical composition. GC-MS analysis of the wood vinegar was found 15 compounds, among them o-mthoxyphenol (25.93%), 2,6-dimethoxyphenol (16.06%), 4-methylenecyclohexanone (10.69%), 2,3-dihydroxytoluene (7.84%), levoglucosane (6.14%) and propanoic acid (5.32%) were the major components. Different concentration of the oak pyroligneous liquor was used, and spore inhibition was recorded on the basis of spore counting. The best results were noted at the concentration of 50% solution where 31.8% spores were inhibited. CONCLUSION: On the basis of the chemical composition of the oak pyroligneous liquor and the activity recorded we can use it as an anti-rust agent.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.5
• /
• pp.1205-1219
• /
• 2019

As the ability to use data becomes competitive power in the data-driven economy, the effort to create economic value by using personal data is emphasized as much as to protect personal data. EU's PSD2(the second Payment Service directive) became the initiative of the Open Banking trends all over the world, as it is the Mydata policy which protects the data subject's right by empowering the subject to control over the personal data with the right to data portability and promotes personal data usages and transfer. Korean government is now fast adopting EU's PSD2 in financial sector, but there is growing concerns in personal data abuse and misuse, and data breach. This study analyzes domestic financial Mydata policy in comparison with EU's PSD2 and focus on Personal information life-cycle risks of financial Mydata policy. Some suggestions on how to promote personal information and privacy in domestic financial Mydata Policy will be given.