• The Korean Journal of Petroleum Geology
• /
• v.12 no.1
• /
• pp.27-33
• /
• 2006

The possibility of oil reserve has been conformed because the oil has been produced by 450 barrel per day in the West Korea Bay basin of the North Korea. There is also possibility of giant oil reserve since it is geographically close to one of the biggest oil fields of Bohai Basin, China. Based on the on-going oil exploration and the present condition of investment, the areas of ongoing oil exploration are three: West Korea Bay B&C prospect explored by Swedish Taurus, the north of West Korea Bay and Anju basin explored by Canadian SOCO, and East Korea Bay explored by Australian Beach Petroleum. However, there is little or no possibility of oil reserve in the rest sea areas of three. Even though oil reserves were discovered in the some parts of land areas such as Kilju and Myungcheon, it was presumed to have no economical efficiency. Geology in West Korea Bay off the North Korea is similar to that in Bohai Bay off China. The basement consists of thick carbonate rock of the Late Proterozoic and Early Paleozoic overlain by Mesozoic ($6,000{\sim}10,000\;m$) and Cenozoic ($4,000{\sim}5,000\;m$) units. Source rocks are Jurassic black shale (3,000 m or more), Cretaceous black shale ($1,000{\sim}2,000\;m$), and pre-Mesozoic carbonates (several thousand meters). Reservoir rocks are Mesozoic-Cenozoic sandstone with high porosity and pre-Mesozoic fractured carbonate rocks. Petroleum raps are of the anticline, fault sealed, buried hill, and stratigraphic types. It absolutely needs to take up a positive attitude, the activation of ocean science and technology exchange, and the joint research and development of modern MT (Marine Technology) considering the state of establishing new international ocean order forcing on building up 200 nautical mile EEZ (exclusive economic zone) among coastal nations. Both South and North Koreas should extend the ocean jurisdiction and contiguity, and MT development dealing with the same sea areas. It is more urgent problem to find a way to have the North Korea participated in, and then to develop ocean management and ocean industry individually.

• Journal of Science Education
• /
• v.34 no.2
• /
• pp.291-305
• /
• 2010

The aim of this study was to survey the perceptions of the elementary school teachers on the smallscale chemistry(SSC) following its training session. The teachers participating in the survey were 266 teachers in the Gyeongnam province. They were given a questionnaire that focused on the nine areas of the SSC: Needs for the teacher training and its application, its benefits, issues of safety and danger as well as treatment of environmental pollution, its economic efficiency and the development of investigative skills. The designed questionnaire was checked by an authority, and the responses to each question were tallied and analyzed. The results are as follows. The biggest problems of the traditional experimental methods as rated by the teachers were, in the order of importance, the preparation time, the legal liability of teachers for the safety and accidents, financial issues, disposal of the experimental wastes and the lack of relevant data. Since most of the teachers had not experienced the SSC lab programs in the field, they responded positively to the questions of need for its introduction and training. The implementation of the experimental SSC lab programs should proceed in the following order: introduction into the textbook, teacher training program, after-school education and the invitation of instructors. The most useful materials for the SSC program were CDs, videos, books and various printed materials, in that order. The responses regarding benefits of the SSC program included its simplicity, convenience, time savings, diversity, qualitative and quantitative aspects, integration into the regular class and use of toys. In particular, the teachers mentioned the increased safety due to the small amount of experimental reagents needed and the durability of plastic instruments. The familarity from the use of everyday tools as well as easy access to and the low-cost of the instruments were other important benefits. The teachers in general rated the educational content of the program highly, but many also found it to be average. Some pointed out the lack of sufficient discussion due to the individual or pair groupings as a potential shortcoming. The potential for development of problem solving ability and improvement of skills was rated positively. The number of teacher who rated the development of creativity positively was just over the half. As for the area of improving investigative skills, many found its assessment difficult and confusing because of the lack of its systemic definition and categorization. Based on the findings of this study, I would like to recommend the application and a wider dissemination of the small-scale chemistry lab program into the elementary school science curriculum.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.1
• /
• pp.65-72
• /
• 2008

The purpose of the HLW deep geological disposal is to isolate and to delay the radioactive material release to human beings and the environment for a long time so that the toxicity does not affect to the environment. The main requirements for the HLW repository design is to keep the buffer temperature below $100\;^{\circ}C$ in order to maintain its integrity. So the cooling time of spent fuels discharged from the nuclear power plant is the key consideration factors for efficiency and economic feasibility of the repository. The disposal tunnel/disposal hole spacing, the disposal area and thermal capacity required for the deep geological repository layout which satisfies the temperature requirement of the disposal system is analyzed to set the optimized spent fuels cooling time. To do this, based on the reference disposal concept, thermal stability analyses of the disposal system have been performed and the derived results have been compared by setting the spent fuels cooling time and the disposal tunnel/disposal hole spacing in various ways. From these results, desirable spent fuels cooling time in view of disposal area is derived. The results shows that the time reaching the maximum temperature within the design limit of the temperature in the disposal site is likely shortened as the cooling time of spent fuels becomes short. Also it seems that the temperature-rising and-dropping patterns in the disposal site are of smoothly varying form as the cooling time of spent fuels becomes long. In addition, it is revealed that a desirable cooling time of spent fuels is approximately 40-50 years when spent fuels are supposedly disposed in the deep geological disposal site with its structural scale under consideration in this study.

• Ecology and Resilient Infrastructure
• /
• v.2 no.4
• /
• pp.265-273
• /
• 2015

It is the better to take preventative measures against the natural intrusion in advance from invasive alien species that reduce biodiversity and cause economic loss to humans. If the prevention of intrusion and spread fails, we need to make active control and eradication. This study aims to introduce nutria (Myocastor coypus) control cases performed in the United Kingdom and the United States and to provide information for the contribution of nutria management measure improvements. The nutria eradication campaign in the United Kingdom was developed as a long-term plan based on sufficient understanding on the management target and objective and suitable support. Sufficient information on nutria was accumulated and the management strategy was flexibly modified according to the changes in management that were proactively reflected in the field. Regarding the eradication project at Chesapeake Bay in the United States, based on long-term ecological information, more advanced capture technology than in the United Kingdom were introduced and the eradication plan, strategy and implementation were configured by analyzing the strengths and weaknesses of the eradication campaign in the United Kingdom. The successful cases in the United Kingdom and the United State provide an information on how to improv the nutria management measure. For the eradication of nutria, it is necessary to reach a consensus between stakeholders and to form a consultative group between related organizations for periodic communication. Opinions on the field must be actively accepted in the consultation process for strategy and policy decision, and the eradication plan needs to be developed based on a management index. The eradication plan is required to be managed, evaluated and adjusted in a systematic way. Scientific management must be introduced and the management performance must be evaluated objectively so that a practical plan can be flexibly adjusted. It is also required to secure a long-term budget support and a stable organization and to input a concentrated budget at the proper period when there is high efficiency of eradication.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.1
• /
• pp.2162-2176
• /
• 1971

From the ancient times our forefathers settled down in this peninsular and cultivated the hills and waste-lands into fields. Instead of fertilizing the lands they moved to find other fertile lands and lived a feudal life of agriculture and various machines played a main role in the land reclamation. The best method of land clearing, the time and efficiency in the operation and the effect of growing crops should sysematically analized prior to the time of 3rd Five-year Economic Development(1972-1976) in order to cultivated 210,000 ha of waste-land or the modernization of our country. The present study was investigated to find out a new working-system of mechanical land clearing and development of fertile soil. The results are as follows: 1) The land reclamation in natural slope is much more encourageable in land clearing and farming when the slope is below ten grades than bench terrace. 2) Weeds were mixed with soil in the land clearing work in order to supply organic materials and to make soil swollen instead of burning of just removing. 3) The equipments such as bulldozers, harrows, power tillers and so on should be prepared in order to do a systematic work in the land clearing. 4) The work of pulling-up roots is dependent upon the forms of roots spreading under the ground. The work of the pulling-up the straight roots was most difficult. 5) The land clearing work of the wrinkled style blocks was easy in pulling up roots and in the time of first plowing. The harrowing work could also be simply done. 6) The amount of soil carried was $240m^3/10a$, 15.6% increased amount from the standard block, while the required time of clearing work was 2 hours 15 minutes 45 seconds/10a, the one third of time required for the standard block. 7) The time disc harrowing work increased 50%, or 15 minutes/10a compared to the harrowing work required in the cultivated soil. 8) The time of rotary tilling increased 2.4 times or 1 hour 47 minutes 43 seconds/10a compared to the time required in the cultivated soil. 9) The reclamed land should be fertilized according to the soil quality, especially added fertilizer should be more than 1,200kg/10a, limes 20kg/10a. In order to produce added fertilizer grass fields should be needed. 10) The experiment of pasture growing is now progressing and therefore the effect of land clearing and the degree of developed soil will be investigated before long.

• Current Research on Agriculture and Life Sciences
• /
• v.8
• /
• pp.129-138
• /
• 1990

This study investigated the relationship between the cutflow of rural population and agricultural policy by using time series method. For the analytical tools, decomposition time series methods and regression technique were employed in computing seasonal fluctuation and cyclical fluctuation of population migration. Also, this study predicted farmhouse, rural population till the 2000's by means of the mathematical methods. The analytical forms employed in forecasting farmhouse, rural population were Exponential curve, Gompertz curve and Transcendental form. The major findings of this study were identified as follows: 1) Rural population and farmhouse population began to decrease from 1965 and hastily went down since 1975. Rural population which accounted for 36.4 percent, 35.6 percent of national population respectively in 1960 diminished about two times: 17.5 percent, 17.1 percent respectively. 2) The rapid decreasing of the rural population was caused because of the outflow of rural people to the urban regions. Of course, that was also caused from the natural decreases but the main reason was heavily affected more the former than the latter. In the outflowing course shaped from rural to the urban regions, rural people concentrated on such metropolis as Seoul, Pusan, Keanggi. But these trends were diminishing slowly. On the other hand, compared with that of the 1970's the migration to Keanggi was still increasing in the 1980's. That is, people altered the way of migration from the migration to Seoul, Pusan to the migration to the out-skirts of Seoul. 3) The seasonal fluctuation index of population migration has gone down since the June which the request of agricultural labor force increases and has turned to be greatly wanted in the March as result of decomposition time series method. As result of cyclical analysis, the cyclical patterns of migration have greatly 7 cycle. 4) As result of forecasting the rural and farmhouse population, rural and farmhouse population in the 2000 will be about 9,655(thousand/people) and 4,429(thousand/people) respectively. Thus, it is important to analyze the probloms that rural and farmhouse population will decrease or increase by the degree. But fairly defining the agricultural into a industry that supply the food, this problem - how much our nation need the rural and farmhouse population - is greatly significant too. Therefore, the basic problems of the agricultural including the outflows of rural people are the earning differentials between rural and urban regions. And we should regard the problems of the gap of relative incomes between rural and urban regions as the main task of the agricultural policy and treat the agricultural policy in the viewpoint of developing economic equilibrium than efficiency by using actively the natural resources of the rural regions.

• The Journal of Fisheries Business Administration
• /
• v.26 no.2
• /
• pp.53-74
• /
• 1995

The purpose of this paper is to compare China's and Korea's marine fisheries industries in order to present the main features of China's marine fisheries and show the comparative advantages they have in production. The results indicate that China's marine fisheries have the following features. (1) The marine proportion of the fisheries industry economic activity is less than 60%. Fishing is 71.3% of that marine activity. (2) The production trends of marine fisheries history in China can be classified as follows: 1) an early growth period, 2) a deliberation/consolidation period, 3) a second growth period, 4) a third growth period, and 5) a fourth growth period. The growth rate has rapidly increased recently. (3) Fish production is over 70% of marine fishing fisheries, the next major product is crustacea. The production of shellfish occupies over 70% of marine aquaculture, seaweed production however, is only 22% of total marine aquaculture. (4) The licensed area for marine aquaculture in China is 586.3 ha and that area is 5.4 times larger than that of Korea. The allotted area for shellfish aquaculture is 60% of marine aquaculture, production areas of crustaceans occupy 27.3%, fish has 7 1%, and seaweed production only 5.7% of allocated marine aquaculture areas. (5) The proportion of power vessels for marine fisheries of China's total power vessel fleet is around 65%, and the marine fisheries portion of non - powered vessels constitutes only 12%. The highest proportion of power vessels engaged in marine fisheries activities is between 10 tonnes to 100 tonnes. (6) The portion of marine fishery workers of all fishery industry employees is 22%, and 70% of them are full - time workers. Of marine fishery workers, 64% are in the fishing sector, 22%, aquaculture workers, and the number of employees in marine fisheries is increasing every year. The analysis of China's fishery industry in the production competitiveness indicates as follows : (1) The licensed areas in marine aquaculture, number of fishing vessels, number of marine fishing workers in China's fishery industry are much more than those of Korea's. Therefore China is much more competitive than Korea in the quantity of production side. However, licensed areas for seaweed aquaculture are more extensive in Korea than China. In China, the number of power vessels of between 10 tonnes and 100 tonnes, the licensed shellfish aquaculture areas, and the number of fishing workers within the fisheries industry are much more than those of Korea. (2) It is estimated that the licensed areas in marine aquaculture, number of medium sized power vessels, number of marine fishery workers will be increased as the quantity of production factors grow in China. (3) At present, yield per Ha. in marine cultures is very low in China. Therefore it is estimated that aquaculture techniques have only been diffused recently in China. Yield of fish per Ha especially is much lower than that of Korea. So the level of aquaculture techniques seems much lower than that of Korea. (4) China is behind Korea in production technique, however the number of HP per boat in China is lower than that of Korea. Therefore, China is much more competitive than Korea in Costs. (5) Average fish catches per marine fishery worker in China is only 1/3 that of Korea's, and average marine aquaculture production in China is only 1/2 that of Korea. Therefore we can say Korea is more competitive than China in efficiency. The average income of marine fishery workers in China is higher that that of other Chinese industries. However, the competitiveness of the fisheries industry in China will be increased as more capital is invested and advanced techniques are developed.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.1
• /
• pp.4-14
• /
• 2010

Collaboration strategies entail information sharing and other varied forms of cooperation that are mutually beneficial to the company and stakeholder groups. This study addresses the specific types of collaboration used in the fashion industry while also examining strategies that have been most successful for fashion companies and perceived benefits of collaboration from the customer perspective. In the present study we define fashion companies and brands as collaborators and their partners or stakeholders as collaboratees. We define collaboration as a cooperative relationship where more than two companies, brands or individuals provide customers with beneficial outcomes utilizing their own competitive advantages on an equal basis. Collaboration strategies entail information sharing and other varied forms of cooperation that are mutually beneficial to the company and stakeholder groups. Through collaboration, fashion companies have pursued both tangible differentiation, such as design and technology applications, and intangible differentiation such as emotional and psychological benefits to customers. As a result, collaboration within the fashion industry has become an important, value creating concept. This qualitative study utilized case studies and in-depth interview methodologies to examine customers' attitudes concerning collaboration in the fashion industry. A total of 173 collaboration cases were identified in Korean and international markets from 1998 through December 2008, focusing on fashion companies. Cases were collected from documented data including websites and industry data bases and top ranked portal search sites such as: Rankey.com; Naver, Daum, and Nate; and representative fashion information websites, Samsungdesignnet and Firstviewkorea. Cases were collected between November 2008 and February 2009. Cases were selected for the analysis where one or more partners were associated with the production of fashion products (excluding textile production), retail fashion products, or designer services. Additional collaboration case information was obtained from news articles, periodicals, internet portal sites and fashion information sites as conducted in prior studies (Jeong and Kim 2008; Park and Park 2004; Yoon 2005). In total, 173 cases were selected for analysis that clearly exhibited the benefits and outcomes of collaboration efforts and strategies between fashion companies and stakeholders. Findings show that the overall results show that for both partners (collaborator and collaboratee) participating in collaboration, that the major benefits are reduction of costs and risks by sharing resource such as design power, image, costs, technology and targets, and creation of synergy. Regarding types of collaboration outcomes, product/design was most important (55%), followed by promotion (21%), price (20%), and place (4%). This result shows that collaboration plays an important role in giving life to products and designs, particularly in the fashion industry which seeks for creative and newness. To be successful in collaboration efforts, results of the depth interviews in this study confirm that fashion companies should have a clear objective on why they are doing the collaboration. After setting the objective, they should select collaboratees that match their brand image and target market, make quality co-products that have definite concepts and differentiating factors, and also pay attention to increasing brand awareness. Based on depth interviews with customers, customer benefits were categorized into six factors: pursuit for individual character; pursuit for brand; pursuit for scarcity; pursuit for fashion; pursuit for economic efficiency; and pursuit for sociality. Customers also placed more importance on image, reputation, and trust of brands regarding the cases shown in the interviews. They also commented that strong branding should come first before other marketing strategies. However, success factors recognized by experts and customers in this study showed different results by subcategories. Thus, target customers and target market should be studied from various dimensions to develop appropriate strategies for successful collaboration.

• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.22-28
• /
• 2005

The use of blankets to preserve heat in oriental melon cultivation is a common practise without artificial heating and warming systems. Efficiency of blanket decreased with annually usage. This experiment was conducted to investigate the effect of double layer nonwoven fabrics on heat conservation, plant growth, fruit quality and yield of oriental melon in greenhouse. The results were compared among the non-woven fabrics of 9+3, 6+6, 6+3 and 12 ounce from transplanting to April 20, 2001, 2002. Night temperature within tunnel was high at 9+3, 6+6, 6+3 and 12 ounce in order. In plant growth, stem length, leaf numbers and exudate, under double layer nonwoven fabrics were better than single layer blanket of 12 ounce especially, 9+3 double layer blanket was the best. Fruit weight, flesh thickness, soluble solid and marketable yield rate remained same in all treatments. Fermented fruit rate was the highest in 12 ounce as $32.9\%,\;19.6\%\;under\;9+3,\;17.1\%\;under\;6+6,\;16.6\%$ under 6+3 double layer nonwoven fabric, respectively. Compared to 2,260kg yield per 10a of 12 ounce single layer nonwoven fabrics, $7\%$ was increased under 9+3 but $3\%\;and\;13\%$ were decreased under 6+6 and 6+3 double layer nonwoven fabrics, respectively. Compared to income, 4,499-thousand-won per 10a, of 12 ounce single layer blanket, $13\%\;and\;3$ were increased under 9+3 and 6+6 double layer nonwoven fabrics, respectively. Whereas, $10\%$ decreased under 6+3 double layer nonwoven fabrics. From this results it is evident that 9+3 double layer nonwoven fabrics was the best for thermokeeping, fruit quality, and was most economic under non heating system.

• Journal of Life Science
• /
• v.18 no.9
• /
• pp.1186-1193
• /
• 2008

The growth performance of pangasiid catfish (Pangasius hypophthalmus), silver carp (Hypophthalmichthys molitrix) and catla (Catla catla) was evaluated in polyculture at varied combinations and stocking ratios in earthen pond for a period of 16 weeks. Combinations of pangasiid catfish, silver carp and catla with the total density of 30,000 fish per hectare were evaluated. A commercial pelleted feed containing 28% crude protein and 6% lipid was fed only to pangasiid catfish at the rate of 8% of body weight during the first six weeks, 6% during the second six weeks and 4% thereafter twice daily. The growth and feed utilization efficiency of pangasiid catfish were found similar in all treatments. The growth of silver carp was markedly decreased upon the increase of its own stocking density. The highest growth of silver carp achieved in polyculture of pangasiid catfish, silver carp and catla at 2:1:1 ratio where density of silver carp was lowest. The growth of catla was found to be affected by the presence of silver carp. The growth rate of catla markedly declined with the increase of silver carp density. The highest growth of catla obtained in polyculture of pangasiid catfish only with catla stocked at 1:1 ratio. The highest yield and economic return achieved in polyculture of pangasiid catfish, silver carp and catla at the ratio of 2:1:1 due to higher growth of silver carp and higher market value of catla. The water quality conditions in all different treatment ponds were within optimum ranges throughout the culture period and the values did not show any significant variation (p>0.05) among the treatments.