• Korean Journal of Materials Research
• /
• v.33 no.6
• /
• pp.257-264
• /
• 2023

To develop a high capacity lithium secondary battery, a new approach to anode material synthesis is required, capable of producing an anode that exceeds the energy density limit of a carbon-based anode. This research synthesized carbon nano silicon composites as an anode material for a secondary battery using the RF thermal plasma method, which is an ecofriendly dry synthesis method. Prior to material synthesis, a silicon raw material was mixed at 10, 20, 30, 40, and 50 wt% based on the carbon raw material in a powder form, and the temperature change inside the reaction field depending on the applied plasma power was calculated. Information about the materials in the synthesized carbon nano silicon composites were confirmed through XRD analysis, showing carbon (86.7~52.6 %), silicon (7.2~36.2 %), and silicon carbide (6.1~11.2 %). Through FE-SEM analysis, it was confirmed that the silicon bonded to carbon was distributed at sizes of 100 nm or less. The bonding shape of the silicon nano particles bonded to carbon was observed through TEM analysis. The initial electrochemical charging/discharging test for the 40 wt% silicon mixture showed excellent electrical characteristics of 1,517 mAh/g (91.9 %) and an irreversible capacity of 133 mAh/g (8.1 %).

• Korean Journal of Veterinary Service
• /
• v.45 no.2
• /
• pp.117-124
• /
• 2022

In the event of an outbreak of a livestock epidemic, it has been considered that the existing burial-centered carcass disposal method should be improved ecofriendly for prevention of leachate and odors from burial basically in regard of pathogen inactivation. Therefore, the aim of this study is whether it was possible to treat the carcass of cattle and chickens using the chemical carcass treatment method. It was conducted to establish detailed treatment standards for the chemical treatment method of cattle and chicken carcasses based on the results of the proof of the absence of infectious diseases in cattle chickens. After inoculating cattle carcass with 10 pathogens (foot and mouth disease virus, bovine viral diarrhea virus, Mycobacterium bovis, Mycobacterium avium subsp. Paratuberculosis, Brucella abortus, Bacillus anthracis, Clostridium chauvoei, Clostridium perfringens, Escherichia coli, and Salmonella Typhimurium) and chicken carcasses with low pathogenic avian influenza virus, Clostridium perfringens type C, E. coli and Salmonella Typhimurium, these were treated at 90℃ for 5 hours in a potassium hydroxide liquid solution corresponding to 15% of the body weight. This method liquefies all cadaveric components and inactivates all inoculated pathogens by PCR and culture. Based on these results, it was possible to prove that chemical treatment of cattle and chicken carcasses is effective in killing pathogens and is a safe method without the risk of disease transmission. The chemical treatment method of livestock carcasses can be suggested as an alternative to the current domestic burial-centered livestock carcass treatment method, preventing environmental pollution, and contributing to public health.

• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.548-551
• /
• 2014

In order to reduce toxicity on the human body, four new cleaning agents (1-4) containing ester and ether functionalities have been invented. The synthesized cleaning agents's physical properties, biodegradabilities, and $LD_{50}$ values, which were conducted by Korea Testing Certification Institute by using standard method, showed excellent values. A specimen for cleaning ability was prepared by cutting in $60{\times}40mm$ size of stainless steel plate. The surface of the above specimens was treated with four different kinds of contaminants, such as cutting oil, anti-rust oil, drawing oil, and lubricating oil. Contaminated specimens were then immersed in compounds (1-4) for 1 to 5 minutes to dissolve oil in the cleaning agent. The data indicate that all compounds (1-4) exhibit good cleaning ability toward four contaminant oils. It is also confirmed that these compounds can be applicable to various industrial cleaning fields as nontoxic and biodegradable cleaning agents because of their excellent biodegradabilities and $LD_{50}$ values.

• Asia Marketing Journal
• /
• v.15 no.4
• /
• pp.33-49
• /
• 2014

Environmental concern has been an important issue for a few decades, and the extent of consumer demand for eco-friendly consumption has been increased. This study seeks to investigate consumers' willingness to pay (WTP) a premium for eco-friendly cosmetics. This study evaluates how much more a consumer is willing to pay for eco-friendly cosmetics and examines significant factors influencing consumers' WTP for eco-friendly cosmetics. Consumers' WTP is measured using four different ecofriendly cosmetics: low-priced skin care cosmetics, low-priced makeup cosmetics, high-priced skin care cosmetics, and high-priced makeup cosmetics. This study uses the contingent valuation method (CVM) to estimate consumer's WTP for eco-friendly cosmetics. Survey questions were designed using both dichotomous choice and payment card method of CVM. Through face to face interviews and on-line surveys, the data were collected from women between 20 and 49 years old residing in Seoul and Kyeonggi area, Korea, in May 2010. A total of 226 questionnaires (132 from interviews and 94 from on-line) were included for the analytical sample in this study. The data were analyzed using descriptive analysis, T-test and Log-Logit analysis. The findings are as follows: First, the WTP measured by dichotomous choice method was estimated using the Log-Logit analysis. The results showed that the estimated WTP for low-priced skin care cosmetics was 19,152 won, which was 27.7% higher than the reference price, 15,000 won. For low-priced makeup cosmetics, the estimated WTP was 18,524 won, and its green premium was 21.0%. The estimated WTP for high-priced skin care cosmetics was 59,128 won, which was 18.3% higher than the reference price, 50,000 won. For high-priced makeup cosmetics was 57,666 won, and its green premium was 15.3%. Second, the WTP measure by payment card method was estimated using descriptive analysis. The results showed that the respondents were willing to pay 17,955 won for low-priced skin care cosmetics, which was 19.7% higher than the reference price, 15,000 won and 17,595 won for low-priced makeup cosmetics, which was 17.3% higher than the reference price. For high-priced skin care cosmetics, the average WTP was 56,950 won which was 13.9% higher than the reference price, 50,000 won. For high-priced makeup cosmetics, the average WTP was 55,650 won, which was 11.3% higher than the reference price. Overall, the WTP was higher in order of low-priced skin care, low-priced makeup, high-priced skin care, and high-priced makeup. It means that consumers decide degree of premium based on the price and the attributes of eco-friendly products. Third, the findings showed that age, monthly income, and having children or not were statistically significant factors that influenced consumers' willingness to pay for eco-friendly cosmetics. Other explanatory variables such as education, marital status, job, purchase experience of eco-friendly products, and environmental concerns did not show any statistical significance. The major contribution of this study is the investigation of the value of green attributes of the products by using CVM. Unlike most previous researches, this research used two methods of CVM, the dichotomous choice and the payment card, so it enhanced the reliability of research. According to this study, consumers showed price sensitivity when they pay green premium. These findings can be used as useful information to establish marketing strategies for green cosmetics.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.1
• /
• pp.60-67
• /
• 2011

BACKGROUND: Because dried herbal medicines have many active ingredients, it is not easy to determine the residue amount after extraction, partition and clean up of pesticides from them. Especially, liquid-liquid partition method is consuming many times and solvents. Macroporous diatomaceous earth(MDE) column was used to replace the separatory funnel for liquid-liquid extraction with dichloromethane to analyze the endosulfan and its metabolite. METHODS AND RESULTS: The residue analysis method using MDE column instead of liquid-liquid partition for determining insecticide endosulfan and its metabolite in 4 dried herbal medicines was developed by GC/MS. As a result, the recovery rates of the pesticides in 4 herbal medicines were ranged from 80.3 to 93.5% for ${\alpha}$-endosulfan, from 81.0 to 100.3% for ${\beta}$-endosulfan and from 80.6 to 95.6% for endosulfan sulfate, respectively. The coefficients of variation for triplicate were ranged from 1.1 to 3.4%. CONCLUSION: The improved methods are more ecofriendly, safer, faster and less laborious than conventional method by KFDA.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.91-97
• /
• 2023

Electrochemical (EC) CO₂ reduction is a promising method to convert CO₂ into valuable hydrocarbon fuels and chemicals ecofriendly. Here, we report on a facile method to synthesize surface-controlled SnO₂/Cu(OH)₂ nanowires (NWs) and its EC reduction of CO₂ to HCOOH and CO. The SnO₂/Cu(OH)₂ NWs (-16 mA/cm²) showed superior electrochemical performance compared to Cu(OH)2 NWs (-6 mA/cm²) at -1.0 V (vs. RHE). SnO₂/Cu(OH)₂ NWs showed the maximum Faradaic efficiency for conversion to HCOOH (58.01 %) and CO (29.72 %). The optimized catalyst exhibits a high C1 Faradaic efficiency stable electrolysis for 2 h in a KHCO₃ electrolyte. This study facilitates the potential for the EC reduction of CO₂ to chemical fuels.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1497-1502
• /
• 2013

When using hydrogen gas as an ecofriendly energy sources, it is necessary to conduct a safety assessment and ensure thereliability of the hydrogen pressure vessel against hydrogen embrittlement expected in the steel materials. In this study, by applying the in-situ SP test method, the gas hydrogen embrittlement behaviors in SA372 steel, which is commonly used as a pressurized hydrogen gas storage container, were evaluated. To investigate the hydrogen embrittlement behavior, SP tests at different punch velocities were conducted for specimens with differently fabricated surfaces at atmospheric pressure and under high-pressure hydrogen gas conditions. As a result, the SA372 steel showed significant hydrogen embrittlement under pressurized hydrogen gas conditions. The effect of punch velocity on the hydrogen embrittlement appeared clearly; the lower punch velocity case indicated significant hydrogen embrittlement resulting in lower SP energy. The fractographic morphologies observed after SP test also revealed the hydrogen embrittlement behavior corresponding to the punch velocity adopted. Under this pressurized gas hydrogen test condition, the influence of specimen surface condition on the extent of hydrogen embrittlement could not be determined clearly.

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.123-127
• /
• 2015

Wood piles are rarely used in the construction of a greenhouse in Korea, but they are relatively more often used in other countries, such as the Netherlands. There are several advantages associated with wood piles: they are more cost-effective, less time-consuming, and more ecofriendly than the steel pipes (SPs) and pre-stressed highstrength (PHC) piles. However, one of the limiting conditions is that they have to be installed below the groundwater level to prevent decay. Since the groundwater levels are generally high in the reclaimed lands in Korea, wood piles are expected to be used often as reinforcements for foundations of greenhouses in these areas. In this study, we measured the uplift capacities of wood piles through in-situ uplift capacity tests with an aim to provide basic design data for wood pile foundations. In order to test their applicability, we then compared these experimentally measured ultimate uplift capacities with the ones calculated through some of the existing theoretical equations. The wood piles used in the loading tests were made of softwood (pine wood), and the tests were performed using piles with different diameters (∅25cm and ∅30cm) and embedded depths (1m, 3m, and 5m). The test results revealed that the uplift capacity of the wood piles showed a clear linearly increasing tendency in proportion to the embedded depth, with the ultimate uplift capacities for the diameters 25cm and 30cm being 9.38 and 10.56tf, respectively, at the embedded depth of 5m; thus demonstrating uplift capacities of ${\geq}9tf$. The comparison between the actually measured values of the uplift capacity and the ones calculated through equations revealed that the latter, which were obtained using the ${\alpha}$ method, were generally in an approximate agreement with the in-situ measured values.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.83-89
• /
• 2020

For the past few decades, as part of efforts to protect the environment where fossil fuels, which have been a key energy resource for mankind, are becoming increasingly depleted and pollution due to industrial development, ecofriendly secondary batteries, hydrogen generating energy devices, energy storage systems, and many other new energy technologies are being developed. Among them, the lithium-ion battery (LIB) is considered to be a next-generation energy device suitable for application as a large-capacity battery and capable of industrial application due to its high energy density and long lifespan. However, considering the growing battery market such as eco-friendly electric vehicles and drones, it is expected that a large amount of battery waste will spill out from some point due to the end of life. In order to prepare for this situation, development of a process for recovering lithium and various valuable metals from waste batteries is required, and at the same time, a plan to recycle them is socially required. In this study, we introduce a nanoscale pattern transfer printing (NTP) process of Li2CO3, a representative anode material for lithium ion batteries, one of the strategic materials for recycling waste batteries. First, Li2CO3 powder was formed by pressing in a vacuum, and a 3-inch sputter target for very pure Li2CO3 thin film deposition was successfully produced through high-temperature sintering. The target was mounted on a sputtering device, and a well-ordered Li2CO3 line pattern with a width of 250 nm was successfully obtained on the Si substrate using the NTP process. In addition, based on the nTP method, the periodic Li2CO3 line patterns were formed on the surfaces of metal, glass, flexible polymer substrates, and even curved goggles. These results are expected to be applied to the thin films of various functional materials used in battery devices in the future, and is also expected to be particularly helpful in improving the performance of lithium-ion battery devices on various substrates.