• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.35-45
• /
• 2012

Need color separation process to appear number of minimum printing plate waterway maximum printing color at printing process. This time, printing plate is separated three primary colors of C(cyan), M(magenta), Y(yellow). Appear all colors of printing such three primary colors. But, three primary color ink appears 100% dark gray that is not clean as chroma is neared color to 0 because is not pure. As well as, the ink area rate that is whole by over print amount increase of three primary is expanded. As a result, influence in secondary printablity set-off growth by inaccurate color reproduction and ink dry badness, trapping efficiency decline etc.. Apply ink saving method that is replaced as K ink in consisted dark color constituent because three primary colors are over print each other adding one more K(black) plate by method to improve these problem. Therefore, can reduce extension of the total ink area rate, and help in correct color appearance control. As well as, eco-friendly printing process attains improving printablity at the same time curtailment of printing expense by reducing requirement of total ink. Usually, there are UCR(under color removal) and GCR(gray component replacement) to ink saving application method. But, the practical use limit is insufficient state to tribe of technological investigation or field application about these method in domestic printing field. Therefore, in this research, ink saving been bringing by one method of eco-friendly printing confirmed that is applicable in usual domestic printing environment. Also, searched result getting in printablity by ink saving application.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.85-88
• /
• 2012

Lately, the scale of the primary energy consumption in Korea is ranked 10th in the world, and it takes up about 1.9% of the entire energy consumption in the world. And among total energy consumption in Korea, the ratio of the part corresponding to the residence or commercial buildings is about 30.5%. Also, with the increased interest in eco-friendly buildings, the production of eco-friendly building materials consisting of them also increases as well. However, since the process of their production generates much energy consumption, so this is being raised as a social problem. Therefore, this study suggests a method to improve thermal performance by using eco-friendly earth plastering materials and natural materials in order to reduce energy consumption in buildings. The experiment evaluated thermal performance by measuring the external and internal temperature of the curing after the plastering of 1cm in the wooden box of 30cm * 30cm * 30cm. As a result, there was difference in the order of powdered coal, pealite, chaff, and rice straw. Among them, powdered coal indicated excellent thermal performance. This will be the foundational research used to improve interior environment and reduce heating bills.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.118-123
• /
• 2009

The objective of this study is to define the plans of eco-friendly housing and the meaning of architectural imagination, and to classify diverse sources of the origins of architect's imagination to propose a desirable green housing plan. Generally, imagination which means the process of forming in the mind based on one's previous experience had been perceived negatively for a long time, however, today this perception has changed as new valuation that imagination is the only the motive of human being's behavior patterns comes out. Meanwhile, green design means planning the healthy life in the future by finding the way that people and environment can live together. In order to realize green design in our lives, some plans which concern environment, style, and alternative technology of housing. Especially, in interior design, not only by technology skills but also by green visual environment, eco-friendly houses exist. Therefore, this study examines several elements which gives green atmosphere into the house, and understands how architectural imagination comes out in eco-friendly housing design through verify some examples.

• 대한조선학회논문집
• /
• 제60권5호
• /
• pp.358-366
• /
• 2023

Due to the International Maritime Organization's (IMO) environmental regulations on NOx and SOx, LNG-fueled eco-friendly ships are gaining attention worldwide, and various eco-friendly ships are being proposed and demanded for conversion to eco-friendly ships in Korea, as the eco-friendly ship law has recently been enforced. In this study, the initial basic design was performed to convert an existing Marine Gas Oil (MGO) fueled ship into an LNG-DF propulsion ship, targeting medium-sized ship, to select the fuel tank capacity and main dimensions and appropriate fuel ratio between the two fuels. In particular, Sustainable basic design method considering environmental impact were proposed by performing a Life Cycle Assessment (LCA) throughout the design process, and various design options were compared and analyzed to meet different design conditions by applying them.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.187-188
• /
• 2016

The purpose of this study is to develop a method of evaluating eco-efficiency of concrete based on environmental load emission, manufacturing cost, and durability in the concrete production process. Eco-efficiency is an advanced concept used to evaluate eco-friendliness of concrete. This technique intends to produce environment-friendly and highly durable concrete while minimizing environmental load on the ecosystem and manufacturing cost based on the results of service life assessment on concrete. This technique can be utilized to efficiently evaluate sustainability of concrete and find methods to improve it. Furthermore, the vision of this study is to contribute to implementation of environment-friendly concrete and construction industry.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.32-33
• /
• 2015

Depending on the industrialization, construction market has grown buildings are based on concrete will continue to increase. But the problems of environmental pollution come to the fore with the indiscriminate use of concrete and rapid development. In addition, carbon dioxide(CO₂) in the process of producing cement being emitted a large amount of has been caused a serious problem of environmental pollution. This trend is being actively conducted research to reduce the use of cement. In this study, eco-friendly materials, such as flats, Blast-furnace slag by mix and cement review the mechanical characteristics of the mudflats eco-friendly cement mortar to reduce the usability of the review were seen as a green building material.

• 전기학회논문지
• /
• 제66권3호
• /
• pp.551-556
• /
• 2017

The cross-linked polyethylene(XLPE) has been most widely used for the power cable insulating layer because of its outstanding properties such as electrical and mechanical properties. However, XLPE is unrecyclable when disposed after replacement and demolishing because it becomes thermosetting through cross-linked process. Recently, because of growing social awareness of recycling and eco-friendly, there is growing need for the development of recyclable insulating materials that can replace XLPE. Therefore, the purpose of this study is to compare the electrical properties of XLPE and recyclable thermoplastic insulating materials. To this end, we compared and analyzed the electrical properties of XLPE and group N2 through AC breakdown test, accelerated water treeing test and accelerated life test(ALT).

• Steel and Composite Structures
• /
• 제45권6호
• /
• pp.877-894
• /
• 2022

Geopolymer concrete (GPC) has emerged as a feasible choice for construction materials as a result of the environmental issues associated with the production of cement. The findings of this study contribute to the development of machine learning methods for estimating the properties of eco-friendly concrete to help reduce CO₂ emissions in the construction industry. The compressive strength (f_c) of GPC is predicted using artificial intelligence approaches in the present study when ground granulated blast-furnace slag (GGBS) is substituted with natural zeolite (NZ), silica fume (SF), and varying NaOH concentrations. For this purpose, two machine learning methods multi-layer perceptron (MLP) and radial basis function (RBF) were considered and hybridized with arithmetic optimization algorithm (AOA), and grey wolf optimization algorithm (GWO). According to the results, all methods performed very well in predicting the f_c of GPC. The proposed AOA - MLP might be identified as the outperformed framework, although other methodologies (AOA - RBF, GWO - RBF, and GWO - MLP) were also reliable in the fc of GPC forecasting process.

• 복식문화연구
• /
• 제20권1호
• /
• pp.62-71
• /
• 2012

The purpose of this research is to analyze the characteristics of the color combination in Eco fashion design. 532 pictures related to eco was collected through Eco brand web sites from 2008 through 2011. The characteristics for analysis include color combination and tone. The method of research is content and statistical analysis. The result of the research is summed up below. First, achromatic color was most frequently presented in Eco fashion. Also monotone color or single color combination were displayed often. Secondly, many dresses were of single color combination and T-shirt items displayed contrast color combination created by luminosity difference. Third, the outcome of comparing seasons was that both seasons presented single color and contrast color combination. The difference between countries proved slight as single color coloration dominated. This considered the process which was non-chemical manufacture for eco-friendly. For the combination of colors, the same coloration with single colors or contrast coloration due to the differences of brightness were presented quite often, generally, the modern image fashion without fancy factors have shown a lot. These results that minimalism trend was included in eco-friendly image.

• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.322-327
• /
• 2015

Objectives: The major objective of this study is the oral dose toxicity test and skin irritation test of eco-friendly plasticizer using crude glycerol derived from the biodiesel process. Methods: Glyceroldiacetate laurate(GDL) was synthesized from glycerol monolaurat(GML) and acetic acid. The synthesis of the GDL plasticizer was measured with nuclear magnetic resonance spectroscop(NMR) and FT-IR(Fourier Transform Infrared Spectrometer). To provide information on the safety of GDL, we carried out an oral dose toxicity test for GDL in Sprague-Dawley rats. Also, we carried out a skin irritation test for GDL in New Zealand White rabbits. Results: The oral dose toxicity test in Sprague-Dawley rats showed that GDL is a non-toxic material. The result of the skin irritation test on New Zealand White rabbits showed that GDL is non-irritating. Conclusions: From the results of oral dose toxicity test and skin irritation test, we concluded that the developed plasticizer showed excellent eco-friendly property. Based on our results, we confirmed the development of an eco-friendly non-phthalate plasticizer. Applicability for PVC toys and food and drug packaging materials was found.