• 한국염색가공학회지
• /
• 제26권3호
• /
• pp.237-241
• /
• 2014

The aim of this study is to develop an eco-friendly reduction process of indigo as an alternative choice. Hansenula misumaiensis was used and their reducing activity toward synthetic indigo as well as natural indigo was estimated by dyeing test in terms of indigo dye uptake. The changes in K/S value and pH were monitored on the time-based measurements. Also, reduction duration was evaluated. On the basis of the results described in this study, it was confirmed that Hansenula misumaiensis reduced indigo. Reducing power of Hansenula misumaiensis reached to maximum in two days. It can be possible to develop eco-friendly process of indigo reduction using Hansenula misumaiensis by the optimization of strain culture conditions and the optimization of reduction conditions.

• 한국환경과학회지
• /
• 제23권11호
• /
• pp.1909-1918
• /
• 2014

In this experiment no solvent based polyurethane(PU) adhesives were prepared with the polyol, isocyanate, dioctyl phthalate(DOP), 2-hydroxyethylacrylate(2-HEA) and other acrylate monomers. The softenening point of the PU adhesives measured by Ring & Ball method were examined in the present study. And adhesion strength and mechanical properties such as tensile strength and 100% modulus of the PU adhesives were evaluated by Universal Test Machine. The experimental results showed that increase of both DPE-41, benzoylperoxide(BPO) and toluene diisocyanate(TDI) increased softenening point, adhesion strength, tensile strength and 100% modulus. However as DOP content increased sofenening point, adhesion strength decreased and tensile strength, 100% modulus also decreased.

• Composites Research
• /
• 제36권2호
• /
• pp.86-91
• /
• 2023

Thermoplastic polyurethane (TPU) is a material whose mechanical properties change according to the phase separation of its unique internal microstructure and is therefore used in various industries. Use of TPU as composites helps in improving the desirable characteristics and properties in accordance with usage. Eco-friendly fillers one of the fillers are on the rise and those are mostly used for reinforcing role. Suberin, which can be extracted from cork, is the main component of cork. It is known to serve high damping property of elastomer composite. The original chemical structure of Suberin is an aliphatic polyester aggregate. In this research, Suberin is obtained after depolymerization into an oligomer having 2 or 3 ester bonds through alkaline hydrolysis. The extracted suberin was added to the matrix which is thermoplastic polyurethane as an eco-friendly filler for improving vibration damping property. As a result, when 10 wt% of suberin was added into thermoplastic polyurethane the existing trade-off relationship was overcome. And it is attained the elastic modulus and damping factor at room temperature improving 92 and 59%, respectively, compared to the original matrix. Those results are from the interaction between the microstructure of TPU and suberin.

• 한국건설순환자원학회지
• /
• 제17권1호
• /
• pp.28-31
• /
• 2022

• Composites Research
• /
• 제37권2호
• /
• pp.115-125
• /
• 2024

환경에 대한 범세계적인 문제와 관심이 고조되는 가운데 자동차 산업에서도 친환경 소재로의 전환이 가속화되고 있다. 자동차 산업에서 친환경 복합재료는 차량 내부 및 비 구조 부품에 주로 사용된다. 특히 천연섬유 복합재료는 차량의 경량화로 연료 소비와 온실가스 배출을 줄이는데 도움을 주며 재활용이 가능하고 우수한 열적 특성과 내구성을 가지고 있어 자동차 내장 부품에 적합하다. 아울러 생산 비용 절감과 지속 가능성은 천연섬유 복합재료의 주요 장점이다. 친환경 복합재료 시장은 2022년부터 2030년까지 연평균 성장률 15.3%로 864억 3천만 달러 규모로 성장할 것으로 기대되며, 천연섬유 복합재료 시장은 2023년부터 2028년까지 연평균 5.3% 성장해 4억 2,400만 달러에 이를 것으로 예상된다. 본 리뷰 논문에서는 천연섬유 복합재료를 중심으로 차세대 자동차용 친환경 복합재료의 연구 동향과 실제 자동차 산업에서의 적용에 대해 탐구한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.65-65
• /
• 2015

In this talk, I will introduce two topics. The first topic is the polymer light emitting diodes (PLEDs) using graphene oxide quantum dots as emissive center. More specifically, the energy transfer mechanism as well as the origin of white electroluminescence in the PLED were investigated. The second topic is the facile synthesis of eco-friendly III-V colloidal quantum dots and their application to light emitting diodes. Polymer (organic) light emitting diodes (PLEDs) using quantum dots (QDs) as emissive materials have received much attention as promising components for next-generation displays. Despite their outstanding properties, toxic and hazardous nature of QDs is a serious impediment to their use in future eco-friendly opto-electronic device applications. Owing to the desires to develop new types of nanomaterial without health and environmental effects but with strong opto-electrical properties similar to QDs, graphene quantum dots (GQDs) have attracted great interest as promising luminophores. However, the origin of electroluminescence (EL) from GQDs incorporated PLEDs is unclear. Herein, we synthesized graphene oxide quantum dots (GOQDs) using a modified hydrothermal deoxidization method and characterized the PLED performance using GOQDs blended poly(N-vinyl carbazole) (PVK) as emissive layer. Simple device structure was used to reveal the origin of EL by excluding the contribution of and contamination from other layers. The energy transfer and interaction between the PVK host and GOQDs guest were investigated using steady-state PL, time-correlated single photon counting (TCSPC) and density functional theory (DFT) calculations. Experiments revealed that white EL emission from the PLED originated from the hybridized GOQD-PVK complex emission with the contributions from the individual GOQDs and PVK emissions. (Sci Rep., 5, 11032, 2015). New III-V colloidal quantum dots (CQDs) were synthesized using the hot-injection method and the QD-light emitting diodes (QLEDs) using these CQDs as emissive layer were demonstrated for the first time. The band gaps of the III-V CQDs were varied by varying the metal fraction and by particle size control. The X-ray absorption fine structure (XAFS) results show that the crystal states of the III-V CQDs consist of multi-phase states; multi-peak photoluminescence (PL) resulted from these multi-phase states. Inverted structured QLED shows green EL emission and a maximum luminance of ~45 cd/m2. This result shows that III-V CQDs can be a good substitute for conventional cadmium-containing CQDs in various opto-electronic applications, e.g., eco-friendly displays. (Un-published results).

• Composites Research
• /
• 제35권6호
• /
• pp.419-424
• /
• 2022

Using non-biodegradable polymers is a severe environmental problem as they are not recyclable and generate a large amount of waste. Biopolymers, such as starch-based composites, have been considered one of the most promising replacement materials. These eco-friendly materials have the advantage of being low-cost, biodegradable, and obtained from renewable sources. However, as starch tends to be brittle and hydrophilic, it can make these materials unusable when exposed to water and limit its processability for further applications. In this work, a biobased modified starch was grafted using two bioderived materials, lauryl methacrylate (LMA) and tetrahydrofurfuryl methacrylate (THFMA), by radical polymerization. A polylactic acid (PLA) composite based on the modified starch (m-St) was fabricated to enhance its toughness. These samples were characterized by Fourier transform infrared, ¹H NMR and ¹³C NMR analysis, optical and scanning electron microscopy. The starch was successfully grafted, thus improving the compatibility with the PLA matrix. The mechanical properties of these films were also studied. Results from mechanical tests showed a slight enhancement of the mechanical performance of these composites when m-St was added to the PLA matrix. Such behavior is related to the improved dispersion of m-St 1:2 on PLA, confirmed by SEM images showing enhanced compatibility between modified starch and PLA matrix. This indicated excellent properties of the produced composite film for further eco-friendly applications.

• 청정기술
• /
• 제29권3호
• /
• pp.172-177
• /
• 2023

Many studies have been conducted on the indiscriminate use of plastic due to the environment problems it has caused all over the world. This problem can be mitigated by using eco-friendly/biodegradable plastics that can be decomposed by microorganisms or enzymes. This study focused on addressing the plastic golf tees that are thrown away at golf courses. In order to replace conventional golf tees (ABS) with a more eco-friendly alternative, this study explored a biodegradable plastic and 3D printing method for producing golf tees. Among the biodegradable plastics, PLA (polylactic acid) was found to be a good candidate as an eco-friendly material because it is biodegradable by microorganisms. Thus, golf tees were prepared by using PLA via 3D printing, and the physical and chemical properties of the tees were evaluated. The amorphous region of PLA was confirmed through XRD. Also, FT-IR showed the unique peak of PLA without impurities. It was confirmed through an optical microscope that the specific surface area and roughness had increased. This structure plays a role in firmly fixing the golf tee when it is inserted into the ground. In addition, it was possible to improve the compressive load compared to ABS golf tees while also decreasing the compressive stretching.

• Carbon letters
• /
• 제26권
• /
• pp.25-30
• /
• 2018

The dielectric medium used in electrophoretic displays (EPDs) is required to be an environmentally friendly solvent with high density, low viscosity, and a large electric constant. Hydrofluoroether, a highly fluorinated solvent with eco-friendly characteristics, is regarded as a viable alternative medium for EPDs, owing to the similarity of its physical properties to those of the conventional EPD medium. Surface modification of particles is required, however, in order for it to disperse in the charged solvent. Also, positive/negative charges should be present on the particle surface to enable electrophoretic behavior. In this study, carbon black particles wrapped with positively charged nitrogen (N-CBs) were fabricated by a simple hydrothermal process using a poly(diallyldimethylammonium chloride) solution as a black coloring agent for the EPD. The dispersion behavior of N-CBs was investigated in various solvents.

• 유기물자원화
• /
• 제23권1호
• /
• pp.52-62
• /
• 2015

슬러지 응집제로서 폴리머, 제올라이트, 고령토, 황토, 키토산 등의 하수슬러지에 대한 응집효과 및 폴리머와 이들 응집제를 혼합한 물질의 응집효과를 검토하였다. 2,500~50,000 mg/L 농도에서 황토가 고령토, 제올라이트보다 하수슬러지에 대한 응집효율이 높았다. 제올라이트, 고령토, 황토 20,000 mg/L 처리의 응집효과는 폴리머 1,000 mg/L 처리의 응집효과보다 낮게 나타났다. 따라서 제올라이트, 고령토, 황토 단독 처리로는 현행 하수슬러지 탈수 시에 사용 중인 폴리머와 같은 응집효과는 기대하기 어려웠다. 키토산 역시 폴리머와 같은 1,000 mg/L 처리에서 응집효과가 현저하게 낮은 것과 고가의 구입비용을 감안하였을 때 키토산 단독처리는 현실적이지 않은 것으로 나타났다. 하수슬러지에 대한 지렁이처리법 적용에 유리한 응집제 조합은 '폴리머 80mg/L +고령토 또는 황토 500 mg/L + 키토산 10 mg/L' 으로 판단되며, 다음으로 '폴리머 80 mg/L + 고령토 또는 황토 500 mg/L' 조합으로 판단된다.