• Steel and Composite Structures
• /
• v.48 no.1
• /
• pp.89-102
• /
• 2023

This study investigates the eccentric performance of concrete-filled steel tubular (CFST) stub columns strengthened with steel tube and sandwiched concrete (STSC) jackets. It was revealed that the STSC jacketing method effectively weakened the cracking of concrete in CFST columns on the convex side and the crash on the concave side. Substantial increases in the eccentric bearing capacities were demonstrated after strengthening. A numerical study was further conducted. The decrease in diameter-to-thickness ratio and increase in strength of outer tube contributed to increase in peak load of all components, whereas the increase in sandwiched concrete strength resulted in load increase on itself and had negligible effects on other components. The parametric study showed the effect of inner concrete strength on columns' bearing capacity was magnified after strengthening, whereas that of inner tube thickness was reduced. Within the parameters investigated, high-strength concrete and high-strength steel can be applied without the concern of early abrupt failure of inner low-strength concrete or steel tube.

• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.229-240
• /
• 2004

Many experiments have been performed to investigate eccentric shear strength and unbalanced moment-carrying capacity of flat plate-column connections under combined gravity and lateral load. However, each existing experiment used different test setup, and the shear strength of the connection was different depending on the test setup. Current design methods which were based on the experimental results might not accurately explain the shear strength of the flat plate. In a companion study, based on results of nonlinear finite element analyses, an alternative design method for the plate-column connection was developed. However, in this method, eccentric shear strength of the connection which was required for assessing unbalanced moment-carrying capacity was evaluated by an empirical formula. In the present study, a theoratical approach using Rankine's failure criterion was attemped to investigate failure mechanism of the eccentric shear. Based on the results, an improved strength model of the eccentric shear was developed, and it was verified by comparison with the existing experimental results. By means of the strength model, the design method developed in the companion study was re-verified.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.6 no.1
• /
• pp.59-65
• /
• 2012

In this study, muscle fatigue of biceps and triceps during isometric exercise depending on concentric contraction and eccentric contraction was evaluated using EMG. 12 healthy male volunteers was performed concentric exercise and eccentric exercise by maximum flection and extension of elbow joint. Integrated EMG (IEMG) in time domain and mean power frequency (MNF) in frequency domain were calculated. MNF of the biceps and triceps was decreased, whereas IEMG was increased during concentric contraction and eccentric contraction. But muscle fatigue index appeared higher at region of stretched muscle length. in this result, muscle fatigue occurs at both biceps and triceps muscle during concentric and eccentric exercise, and muscle fatigue was affected by muscle contraction and extension.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1749-1755
• /
• 2014

Technique for analyzing a pile installed by vibrohammer was developed and parametric studies were executed in order to evaluate reliability of the developed technique. Comparing the accelerations obtained from parametric studies of varying eccentric moment and frequency, it can be seen that magnitude of maximum acceleration was proportional to the eccentric moment and square of frequency. It can also be seen that amplitude of displacement was roughly proportional to the eccentric moment but has nothing to do with the frequency. It can be said that all of the analysis results reflect characteristics of behavior of a pile in case of free vibration. Comparing the dynamic load transfer curves, maximum dynamic unit toe resistance was constant regardless of the eccentric moment and the frequency and it can be seen that dynamic unit skin friction was affected by the eccentric moment not by frequency. Comparing all of the analysis results, it can be said that the developed technique is reliable.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.2
• /
• pp.65-72
• /
• 2012

In this stury, control performance of tuned mass damper (TMD) with torsional rigidity for an eccentric structure showing torsional responses is investigated. To this end, an eccentric structure subjected to earthquake excitation is used to evaluate the control performance of torsional TMD by varying installed location and torsional rigidity of TMD, To reduce computational time required for repetitive time history analysis of an example structure having non-proportional damping system due to TMD, an equivalent analytical model is used in this study. Torsional properties of TMD usually neglected in typical TMD are verified to be effective in reduction of torsional responses of the eccentric structure. In the case of eccentric structures, it has been seen that the center of a plane of a structure may not be optimal location of TMD.

• Korean Journal of Exercise Nutrition
• /
• v.17 no.2
• /
• pp.25-34
• /
• 2013

This study was conducted to investigate the relationship between ACE gene polymorphism and muscle damage parameters after eccentric exercise. 80 collegiate males were instructed to take an eccentric exercise with the elbow flexor muscle through the modified preacher curl machine for 2 sets of 25 cycles (total 50 cycles). The maximal isometric strength, muscle soreness, creatine kinase (CK), and myoglobin (Mb) were measured before exercise, and 0, 24, 48, 72, and 96 hrs after exercise. The result showed that after the eccentric exercise, the maximal isometric strength significantly decreased by more than 50% (p < 0.001) and the muscle soreness, CK, and Mb significantly increased compared to those before the exercise (p < 0.001). The ACE gene polymorphism of the subjects was classified using real-time polymerase chain reaction (real-time PCR). The result showed that it consisted of 38 cases of type II (46.4%), 33 cases of type ID (43.4%), and 9 cases of type DD (10.2%). The Hardy-Weinberg equilibrium for ACE gene polymorphism was shown to have p = 0.653, which showed that each allele was evenly distributed. Although significant differences in the changes in the maximal isometric strength, muscle soreness, CK, and Mb were found according to time course (p < 0.001), no significant differences in the changes in the maximal isometric strength, muscle soreness, CK, and Mb were found according to ACE gene polymorphism. Furthermore, no significant difference in the changes in the muscle damage parameters was found according to interaction between ACE gene polymorphism and time course (p > 0.05). In conclusion, the level of the muscle damage parameters changed in the injured muscle after eccentric exercise, but these changes in the muscle damage parameters were not affected by ACE gene polymorphism. The result of this study indicates that ACE gene is not a candidate gene that explains muscle damage.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.815-816
• /
• 2013

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.201-202
• /
• 2011

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.341-342
• /
• 2010

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.105-113
• /
• 2018

The proposed model to predict the bridge load carrying capacity uses the impact response spectrum. The spectrum is based on Euler-Bernoulli beam and the center of the bridge width for the moving load location. Therefore, it is necessary to investigate the eccentric moving load effects on the impact factor and response factor. For this, this study considers 10 m width and two-lane simply supported slab bridges and performs the moving load analysis to investigate the variations of peak impact factor and corresponding response factor. The numerical results show that the eccentric load increases both the static and dynamic displacements, but the impact factor is decreased since the incremental amount of static displacement is bigger than that of dynamic displacement. However, the difference of the impact factors between the center and eccentric loadings is small showing less than 0.5%p. In the response factor, the eccentric loading increases both the static and dynamic response factors, compared to the center loading. The difference of the response factor is only 0.18%p. It shows that the eccentric loading has very small effects on the response factor, thus the impact factor response spectrum which is generated based on the center moving load can be used to determine the response factor.