• Journal of radiological science and technology
• /
• v.38 no.4
• /
• pp.355-363
• /
• 2015

Advancement in the medical field provides an opportunity for the development of medical equipment and also enable accurate diagnosis for the inspection and the treatment of diseases. The aging of equipment due to the frequent operation produce uncertainty in the patient exposure dose, so a quality control was implemented by establishing a safety management system on a regular basis. The x-ray tube voltage (kVp), which is directly involved in the patient exposure dose and the life of the equipment, needs periodic performance for the quality control, but it has a limitation due to the time and the cost. In this study, we proposed a new method for measuring the kVp with ease by using the Y and Cu to solve the problem of the time and cost. We also evaluated the usefulness and the effectiveness of the new method and its accuracy through the kVp measurement. After securing the condition, the amount of the tube current and evaluating the usefulness and effectiveness of kVp measured using Y and Cu. The density range used was at 0.5-1.0, kVp was in the range of ${\pm}10%$, then, we recorded the change in concentration as % of Y and Cu. This experiment showed that when Cu and Y was at 75 kVp, concentration was the same, and when the kVp was changed to 65 ~ 85 %, a gradual increase in concentration to 85 ~ 110 % was noted.

• Journal of Veterinary Clinics
• /
• v.26 no.6
• /
• pp.563-567
• /
• 2009

This study compared the instrument performance and tissue healing of a steel scalpel with a $CO_2$ laser in an animal uterine surgery model. Five Landrace and Yorkshire mixed breed pigs were used. Two symmetrical incisions were made in the uterine of each pig. One incision was made on the left side of the uterine horn using a steel scalpel, while the other incision was performed on the right side using a $CO_2$ laser with an 8W output power. Each instrument was evaluated clinically for speed, ease of incision, and extent of bleeding. An ovariohysterectomy was performed at 21 days after the surgical procedure for a histological examination. The scalpel was an easier instrument to use in the confines of the uterine tissue, compared with the laser. However, there is no significant difference between the two groups. The amount of bleeding was less in the laser group but the time of the incisions was shorter with the scalpel. Postoperative uterus adhesion in the $CO_2$ laser incisions was lower than the scalpel incisions. Scalpel incisions showed complete restoration of the epithelium and endometrial gland. On the other hand, the laser incisions showed incomplete restoration of the epithelium and endometrial gland. Although the scalpel produced less damage to the uterine tissue and was easier to handle than the $CO_2$ laser, it did not provide hemostasis that was helpful for use on highly vascular tissue. The $CO_2$ laser provided good hemostasis but delayed wound healing.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.2
• /
• pp.161-166
• /
• 2003

Korean ginseng(Panax gmseng C.A. Meyer) is very difficult to obtain stable production of qualified ginseng roots because of variable stresses in soil environments. In environment stresses, soil condition is the most important factor, among which nutrients, especially inorganic materials such as N, P, K, Ca, Mg, Fe, etc., influence greatly on the ginseng growth. However, present ginseng field soils in Korea contain so much amount of such inorganic materials that a variety of remarkable disorders were noted in many ginseng plantations, resulting in decrease of qualitative ginseng production. Therefore, it is required to search for genetic resources and genes tolerant to salt stress for the development of ginseng cultivars. Selection of stress-tolerant ginseng lines in fields is very difficult because it is almost impossible to control properly the environmental conditions of soil. On the contrary, it can be studied with ease to search for stress-tolerant ginseng lines through in vitro culture because of easy manipulation of stress conditions. Murashige & Skoog(MS) media with 2.5 folds of $KNO_3,\;NH_4NO_3,\;MgSO_4\;7H_2O,\;KH_2PO_4,\;and\;CaCl_2\;2H_2O$ was established for the selection of ginseng lines tolerant to salt stress under the embryo culture.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.2
• /
• pp.3438-3453
• /
• 1974

Unmeasured value of water for human lives is widely approved, but the water as one of natural resources cannot be evaluated with ease since it changes itself ceaselessly by flowing-out or transforming the phase. Major objectives of the study concerned consequently with investigating its potentiality and evaluating its time seriesly availabity in a volumatic unit. And the study was performed to give the accurate original data to the planners concerned. Some developed rational methods of predicting runoff related to hydrological factors as precipitation, were to be discusseed for their theorical background and to be introduced whether they needed some corrections or not, comparing their estimation with actual runoff from synthetic unit-hydrograph methods. To do so, the study was performed to select Kongju Station, located at the watershed of the Keum River, and to collect such hydrological data from 1962 to 1972 as runoff, water level, precipitation, and so on. On the other hand, the hydrological characteristics of runoff were concluded more reasonably in numerical values, with calculating the the ratio of daily runoff to annual discharge of the flow in percentage, as. the distribution ratio of runoff. The results of the study can be summarized as follows; (1) There needed some consideration to apply the Kajiyama's Formula for predicting monthly runoff of rivers in Korea.(2) The rational methods of predicting runoff might be recommended to become less theorical and reliable than the unique analyzation of data concerned in each given water basin. The results from the Keum River prepared above would be available to any programms concerned. (3) The most accurate estimation for runoff could be suggested to synthetic unithydrograph methods calculated from the relation between each storm and runoff. However it was not contained in the study. (4) The relations between rainfall and runoff at KongJu Station were as following table. The table showed some intersting implications about the characteristics of runoff at site, which indicated that the runoff during three months from July to September approached total of 60% of quantity while precipitation concentrated on the other three from June to August. And there were some months which had more amount of runoff than expected values calculated from the precipitation, such as Febrary, March, August, September, Octover, and December, shown in the table. Such implications should be suggested to meet any correction factors in the future formulation concerned with the subjects, if any rational methods would be required.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.398-403
• /
• 2012

Purpose: Mandible resection and discontinuity defect created lead to aesthetic and functional problems. The iliac crest bone graft exhibits relative ease for bone harvesting, possibility of two team approach, ability to close the wound primarily, large amount of corticocancellous bone and relatively few complications. Whereas the use of free vascularized flaps has donor site morbidity and worse-fitting bone contour, the use of nonvascularized iliac bone graft has advantages in the operation time and patients' recovery time. So, nonvascularized iliac bone graft could be an attractive option. Methods: Twenty-one patients (M:F=1:1.1) underwent iliac crest bone harvesting for reconstruction of mandibular discontinuity defect (mean length : $61.6{\pm}17.8$ mm), from May 2005 to October 2011 at the Department of Oral and Maxillofacial Surgery in Kyungpook National University. The average age was $44.1{\pm}16.4$ years and the mean follow up periods was $28.2{\pm}22.7$ months. Bone resorption rate, according to age, sex, primary lesion, location and distance of defect, type of fixation plate, time of graft and pre-operative radiation therapy, were measured in each patient. Results: The mean bone resorption rate was $16.1{\pm}9.0%$. Bone resorption rate was significantly increased in mandibular defect that is over 6 cm in size (P=0.015, P<0.05) and the cases treated pre-operative radiation therapy (P=0.017, P<0.05). All was successfully fixed and maintained for the long-term follow-up. There were a few donor site complications and almost all patients were shown favorable outcome without severe bone resorption in this study. Conclusion: The nonvascularized iliac bone graft seems to be a reasonably reliable treatment option for reconstruction of mandibular discontinuity defects.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.3_4
• /
• pp.390-401
• /
• 2002

This study was to evaluate the fitness and the suitability of size specification of the ready made jacket for women by analysing pattern size and space between skin and clothing using 3D scanner. The results were as follows: 1. Pattern B had the lowest score and the feeling of wearing was significantly different among the given patterns even though all jacket size specification were the same. 2. Ease amount was different between each brand even though the jacket size specification was the same due to the different pattern grading rules. And increasing grading amounts were bigger in horizontal direction rather than in vertical direction. 3. We could obtain accurate a 3 dimensional figure, using 3D scanner which was very useful and more accurate than 2 dimensional data using photography method. 4. Analyzing the average space between skin and clothing of each pattern, there was no significant difference in the average space between skin and clothing among all patterns except waist part of B88 size. And analyzing the average space between skin and clothing of each measured body parts by each size, there existed a significant difference in the interscye, abdomen and hip parts.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.255-264
• /
• 2011

Purpose: To study the effect of hyaluronic acid(HA), which was widely used in artificial tears, multi-purpose solution(MPS), cosmetics, and drug acting on the musculo-skeletal system, in wettability and comfort of contact lens, we compared HA including lens(+HA) with HA excluding lens(-HA) by clinical evaluation. Methods: During four weeks, the selected 28 university student volunteers who did not have any eye disease wore +HA contact lens on their right eyes, and -HA contact lens on their left eyes, and then compared right eyes to left eyes as control. After prescribing by spherical equivalent calculation, over-refraction by auto-refractometer, and contact lens wearing for two weeks and four weeks, tear evaluation, the anterior of eyes examination, fitting convenience evaluation, surface wetting test, surveys were checked up. Results: Compared with the control group (-HA contact lens), +HA contact lens provided better wetting properties. The amount of released tear in -HA contact lens group became less in four weeks than before, but that in +HA contact lens group showed no significant difference from the initial one. In terms of the redness in eye, there was no significant difference between +HA and -HA contact lens groups. Fitting of +HA contact lens on eye was much easier than the control, -HA contact lens. From the results of survey, comfort, wettability, ease of cleaning, and dryness of eye in +HA contact lens group were generally better than those of -HA group, but redness and contact lens handling showed little difference. Conclusions: The addition of HA in soft contact lens(+HA) may enhance the wettability of lens during lens wearing, resulted in the better comfortable wearing of lens eventually.

• Korean Journal of Materials Research
• /
• v.29 no.4
• /
• pp.205-210
• /
• 2019

$Pb(Zr,Ti)O_3$ (PZT) is used for the various piezoelectric devices owing to its high piezoelectric properties. However, lead (Pb), which is contained in PZT, causes various environment contaminations. $(K,Na)NbO_3$ (NKN) is the most well-known candidate for a lead-free composition to replace PZT. A single crystal has excellent piezoelectric-properties and its properties can be changed by changing the orientation direction. It is hard to fabricate a NKN single crystal due to the sodium and potassium. Thus, $(Na,K)NbO_3-Ba(Cu,Nb)O_3$ (NKN-BCuN) is chosen to fabricate the single crystal with relative ease. NKN-BCuN pellets consist of two parts, yellow single crystals and gray poly-crystals that contain copper. The area that has a large amount of copper particles may melt at low temperature but not the other areas. The liquid phase may be responsible for the abnormal grain growth in NKN-BCuN ceramics. The dielectric constant and tan ${\delta}$ are measured to be 684 and 0.036 at 1 kHz in NKN-BCuN, respectively. The coercive field and remnant polarization are 14 kV/cm and $20{\mu}C/cm^2$.

• Korean Journal of Community Nutrition
• /
• v.25 no.6
• /
• pp.464-473
• /
• 2020

Objectives: The purpose of this study was to compare and analyze e-commerce food purchase behavior and the perceptions of adult women according to their household types. Methods: The e-commerce food purchases of 318 adult women were surveyed and analyzed according to their household types (one-person or couple household (OCH); a household with children (HC); a household with parents (HP)). Results: The total amount of food purchases over 6 months through e-commerce according to household types was in the descending order of OCH (60.3%), HC (57%), and HP (55.1%) thus showing a significant difference (P < 0.05) in behavior between household types. The reasons for purchasing food through e-commerce included: a lower price than offline (30.8%), convenient delivery and transportation (30.2%), and food diversity (21.1%). When purchasing food online, the most important factor was price and quality, followed by quick and accurate delivery for OCH, exact information given about the product for HC, and recommendation from other consumers for HP (P < 0.01). The main foods purchased through e-commerce were coffee, tea (42.1%), instant and frozen foods (39.9%), water, beverages, dairy products (37.7%), snacks, bread, rice cakes (31.5%), and functional foods (27.4%). The percentage of respondents who were very satisfied or satisfied with their e-commerce food purchases was HP (84.1%), OCH (69.9%), and HC (65.6%) in that order (P < 0.05), and 96.5% of all subjects stated that they would be willing to purchase food through e-commerce in the future. The advantages of purchasing food through e-commerce were seen to be the highest in order and payment convenience with 4.1 points out of 5, followed by low price (4.0), variety of products (3.9), and ease of food purchase (3.9). Among the disadvantages listed, concerns about product damage and deterioration during delivery and differences between the displayed product and the delivered product were the highest with 3.7 points. Conclusions: The characteristics and perceptions of female consumers according to household types are important factors in enhancing the reach of e-commerce, and in preparing guidelines for food selection through e-commerce.

• Journal of Internet Computing and Services
• /
• v.22 no.3
• /
• pp.75-83
• /
• 2021

With the development of the IT industry and the increase of cultural activities, the demand for works increases, and they can be used easily and conveniently in an online environment. Accordingly, copyright infringement is seriously occurring due to the ease of copying and distribution of works. Some special types of Online Service Providers (OSP) use filtering-based technology to protect copyrights, but they can easily bypass them, and there are limits to blocking all illegal works, making it increasingly difficult to protect copyrights. Recently, most of the distributors of illegal works are a certain minority, and profits are obtained by distributing illegal works through many OSP and majority ID. In this paper, we propose a profiling technique for heavy uploader, which is a major analysis target based on illegal works. Creates a feature containing information on overall illegal works and identifies major heavy uploader. Among these, clustering technology is used to identify heavy uploader that are presumed to be the same person. In addition, heavy uploaders with high priority can be analyzed through illegal work Distributor tracking and behavior analysis. In the future, it is expected that copyright damage will be minimized by identifying and blocking heavy uploader that distribute a large amount of illegal works.