• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1255-1255
• /
• 2022

Recently, research on digital twins to generate digital information and manage construction in real-time using advanced technology is being conducted actively. However, in the construction industry, it is difficult to optimize and apply digital technology in real-time due to the nature of the construction industry in which information is constantly fluctuating. In addition, inaccurate information on the topography of construction projects is a major challenge for earthmoving processes. In order to ultimately improve the cost-effectiveness of construction projects, both construction quality and productivity should be addressed through efficient construction information management in large-scale earthworks projects. Therefore, in this study, a 3D digital map-based AR site management work support system for higher efficiency and accuracy of site management was proposed by using unmanned aerial vehicles (UAV) in wide earthworks construction sites to generate point cloud data, building a 3D digital map through acquisition and analysis of on-site sensor-based information, and performing the visualization with AR at the site By utilizing the 3D digital map-based AR site management work support system proposed in this study, information is able to be provided quickly to field managers to enable an intuitive understanding of field conditions and immediate work processing, thereby reducing field management sluggishness and limitations of traditional information exchange systems. It is expected to contribute to the improvement of productivity by overcoming factors that decrease productivity in the construction industry and the improvement of work efficiency at construction sites.

• 한국지반환경공학회 논문집
• /
• 제22권3호
• /
• pp.45-51
• /
• 2021

고속도로 토공에서 대부분을 차지하는 성토부의 다짐도 평가는 일반적으로 평판재하시험에 의해 이루어진다. 평판재하시험은 전통적인 시험법으로 높은 신뢰성을 가지고 있지만, 반력장비를 공수해야 하고, 시험 시 개소당 약 40분의 시간이 소요됨에 따라 광활한 토공부 전체를 관리하기에는 한계가 발생할 수 있다. 한편, 국토해양부에서는 이를 극복하고자 2010년에 '포장 하부구조 다짐관리 잠정지침'에서 간편한 다짐도 평가방법 기준을 제시한 바 있다. 하지만 10년이 지난 지금까지 고속도로공사 현장에서는 활용하고 있지 못하고 있다. 따라서, 본 연구에서는 잠정지침에서 제시한 시험법 중 충격재하 방식의 LFWD(Light Falling Weight Deflectometer)를 활용한 다짐도 평가방법에 대한 활용성을 검증하고자 하였다. 이를 위하여 현장 토질 성상 및 다짐도별로 평판재하시험 및 LFWD시험을 실시하여 상관관계를 도출하였다. 시험결과, 80% 이하의 상대 다짐도를 가진 지반에서는 시험데이타의 일관성이 없었으나, 그 이상에서 상관도가 증가하는 경향을 가지는 것을 확인할 수 있었다. 향후 충격재하 방식의 시험값의 일관성 확보를 위하여 본 연구 결과를 참고하여 시험방법 또는 시험장비를 개선한다면 토공부 다짐도 관리 사각지대를 해소하는 데에 큰 역할을 할 수 있을 것으로 기대한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.238-242
• /
• 2008

Transitional zones, one of the typical weak area of earthworks, require lasting a maintenance work due to a differential stiffness of substructures. It is very difficult problem that transition zone was perfectively prevented against a differential settlement. The transitional zone will deteriorate at an accelerate rate. This may lead to pumping ballast, swinging or hanging sleepers, permanent rail deformations, worn track components, and loss of surface and gauge. In this study, it is performed that settlement behavior in transitional zone was compared with small model test.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2019년도 춘계종합학술대회
• /
• pp.169-170
• /
• 2019

지구단위계획에 의한 택지개발 등의 현장에서 빈번하게 발생하는 토공은 우기 시에 많은 양의 토사침식이 우려된다. 따라서 현장에서 물관리는 매우 중요하며 이를 간과했을때는 대형 재해로 연결 될 수 있으므로 중요하다. 이들 지역은 대부분 소규모지역이므로 수문해석에 필요한 DSM을 드론사진측량으로 손 쉽게 구축할 수 있으며 이를 이용하여 유역면적의 파악, Flow direction, Flow accumulation을 분석한다면 준공까지 효율적으로 물관리가 가능하다.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1191-1202
• /
• 2013

기존의 토공 자동화 연구들은 주로 GPS와 센서의 응용, 작업환경 모델링, 장비 진로계획, 작업 정보관리, 원격조정 등과 같은 주제에 관심을 두었다. 최근에는 건설자동화 연구분야에서 $CO_2$ 감축이 주요 관심사의 하나로 대두되었다. 토공작업의 경우에는 많은 종류의 건설장비나 로봇들이 관여되므로 건설현장에서 많은 양의 $CO_2$를 배출하는 작업이 되고 있다. 효과적인 토공계획과 건설장비 운영은 생산성 및 안전성을 증가시킬 뿐만 아니라 $CO_2$ 배출량도 줄일 수 있다. 본 연구에서는 3D 토공현장 모델, 2가지 시공법에 의한 3D 토량배분 방법, 토공작업 패키지 구성방법과 같은 그린 토공을 위한 몇 가지 자동화 개념을 제시하고 있다. 엑셀로 작성된 시뮬레이터를 개발을 통하여 주어진 토공작업에 대하여 3D 토량배분 계획을 수립하였고 $CO_2$ 배출량을 추정하였다.

• 한국측량학회지
• /
• 제39권5호
• /
• pp.279-288
• /
• 2021

In the era of the 4th industrial revolution, smart construction, in which new technologies such as UAV (Unmanned Aerial Vehicle) are fused, is attracting attention in the construction field. However, the method of estimating earthwork volume using DEM generated by UAV survey according to practical regulations such as construction design guidelines or standard product counting is not officially recognized and needs to be improved. In this study, different types of UAV were measured and DEM was obtained using this data. The DEM (Digital Elevation Model) thus obtained was analyzed for changes in the amount of earthworks according to the size of the GSD (Ground Sample Distance). In addition, the amount of earthwork by DEM and the amount of earthwork by existing design drawings were compared and analyzed. As a result of the study, it was suggested that images with a GSD of 5cm or less are effective to generate a high-quality DEM. Next, as a result of comparing the earthwork volume calculation method using DEM and the earthwork volume based on the existing 2D design drawings, a difference of about 1% was shown. In addition, when the design earthwork amount calculated by the double-section averaging method was compared with the designed earthwork amount using DEM data by UAV survey, a difference of about 1% was found. Therefore, it is suggested that the method of calculating the amount of earthworks using UAV is an efficient method that can replace the existing method.

• 한국산업보건학회지
• /
• 제33권3호
• /
• pp.317-331
• /
• 2023

Objectives: Construction workers are exposed to various hazardous substances simultaneously. However, little is known about the exposure hazards in construction industry. This study was aimed at identifying the risk of exposure hazards among construction workers. Methods: The expert survey (n=29) was conducted, including construction industry health managers (n=11) and work environment monitoring experts (n=18), on exposure probability, intensity and risk of hazardous substances by construction occupations Results: The exposure hazards of 30 construction occupations were identified and summarized through a literature review and expert survey. The most prevalent hazards were in order of noise, awkward posture, heat/cold, crystalline silica, cement/concrete dust, metal fumes, and volatile organic compounds. The hazards with highest risk score(over seven points) at construction occupations were noise(formwork carpenter, concrete finisher, rebar worker, demolition worker, driller/rock blaster), hazardous rays(welder), heat/cold (earthworks, formwork carpenter, rebar worker, concrete placer, scaffolder), awkward posture(bricklayer, caulker/tile setter, rebar worker) and heavy lifting(bricklayer, rebar worker). Among construction workers, the job types with the highest risk of exposure to carcinogens, and in which occupational cancer has been reported, were in order of stonemason, concrete finisher, rock blaster, welder, insulation installer, painter, scaffolder, plant worker and earthworks in order Conclusions: Systematic research and discussion on occupational disease among construction workers and its various hazardous factors are needed to establish job exposure matrix for facilitating standard for promptly processing the workers' compensation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.35-36
• /
• 2017

The finish works of construction projects comprises approximately 40% of the total construction duration. Thus, the management of finish works have as big as impacts on total project duration as the earthworks, foundation and structure works. Process interference management is considered one of the most important issues dealt during finish works. However, it was investigated that effective management systems have yet not been applied for practical use. Accordingly, this paper suggests a mobile technology based finish works management system that mainly focuses on preventing process interference occurred due to ineffective communication between general and sub-contractors.

• 한국수학사학회지
• /
• 제27권2호
• /
• pp.101-110
• /
• 2014

Joseon is mainly an agricultural country and its main source of national revenue is the farmland tax. Since the beginning of the Joseon dynasty, the assessment and taxation of agricultural land became one of the most important subjects in the national administration. Consequently, the measurement of fields, or the area of various plane figures and curved surfaces is a very much important topic for mathematical officials. Consequently Joseon mathematicians were concerned about the volumes of solids more for those of granaries than those of earthworks. The area and volume together with surveying have been main geometrical subjects in Joseon mathematics as well. In this paper we discuss the history of volumes of solids in Joseon mathematics and the influences of Chinese mathematics on the subject.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.162-163
• /
• 2016

This paper presents a mathematical model for optimizing earthwork allocation plan that minimizes earthwork cost. The model takes into account operational constraints in the real-world earthwork such as material-type (i.e., quality level of material) and quantities excavated from cut-sections, required quality of material and quantities for each embankment layer, top-down cutting and bottom-up filling constraints, and allocation orders. These constraints are successfully handled by assuming the rock-earth material as the three dimensional (3D) blocks. The study is of value to project scheduler because the model identifies the optimal earth allocation plan (i.e., haul direction (cut and fill pairs), quantities of soil, type of material, and order of allocations) expeditiously and is developed as an automated system for usability. It is also relevant to estimator in that it computes more realistic earthworks costs estimation. The economic impact and validity of the mathematical model was confirmed by performing test cases.