• 한국지진공학회논문집
• /
• 제6권4호
• /
• pp.1-6
• /
• 2002

일반설계에서 요구하는 구조물의 안전성은 탄성영역에서 일정수준의 안전계수를 확보하여 만족된다. 그러나 내진설계에서의 안전성은 소성영역에서 구조물의 형상에 따라 특정한 연성파괴메카니즘을 유도하여 확보하도록 요구하고 있다. 그러므로 이러한 안전성은 구조물의 기본설계단계에서 여러 개의 대안을 가지고 비교, 검토를 수행하여 확보되어야 하며 실시설계단계에서 이를 확인하는 작업이 이루어져야 한다. 이 연구에서는 일반도로교량을 대상으로 하여 기본설계와 실시설계에 사용하는 모델을 설정하였으며 양 모델의 동적거동특성인 주기와 모드형상을 비교하고 다중모드스펙트럼해석을 적용하여 파괴메카니즘을 규명하였다. 기본설계와 실시설계에 사용하는 모델로 각각 확인한 파괴메카니즘을 비교하여 기본설계모델의 타당성을 입증하고 실무에 적용할 수 있는 내진해석모델로 제시하였다.

• Coupled systems mechanics
• /
• 제4권1호
• /
• pp.19-36
• /
• 2015

Modelling and analysis of a brick masonry building involves uncertainties like modelling assumptions and properties of local material. Therefore, it is necessary to perform a calibration to evaluate the dynamic properties of the structure. The response of the finite element model is improved by predicting the parameter by performing linear dynamic analysis on experimental data by comparing the acceleration. Further, a nonlinear dynamic analysis was also performed comparing the roof acceleration and damage pattern of the structure obtained analytically with the test findings. The roof accelerations obtained analytically were in good agreement with experimental roof accelerations. The damage patterns observed analytically after every shock were almost similar to that of experimental observations. Damage pattern with amplification in roof acceleration exhibit the potentiality of earthquake resistant measures in brick masonry models.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.341-347
• /
• 2000

Even for the same structure, the analysis results as well as design values might have differences depending on the selected analysis model. Therefore it is desirable to determin model considering the required accuracy of the analysis results, the given time restried economy. " Standard Specification for Roadway Bridges" Division V, Seismic Design prove "Single Mode Spectral Analysis Method" as the basic analysis method for the earthquake design of roadway bridges classified as "regular". In this study a 5 span steel box girl selected which satisfies the regularity and the applicability of the provided analysis simplified model in checked. For the comparision of the analysis results, "Multi-Mode Spect Method" is used with a detailed model.hod" is used with a detailed model.odel.

• 한국지진공학회논문집
• /
• 제3권1호
• /
• pp.1-8
• /
• 1999

본 논문의 목적은 탄소성 지진 응답해석을 수행하여 고층 벽식 아파트의 내진성능을 평가하는 것이다 먼저 구조물을 3차원 입체 모델화 하여 정적 탄소성 해석을 수행하고 층강성 및 항복 충전단력을 평가한 후 그 결과를 이용하여 집준 질량계 모델을 사용한 시간 이력 지진 응답해석을 수행한다 탄소성 이력 모델로는 bi-linear 모델 및 Clough 모델을 입력 지진동파형으로는 4종류의 기록 지진동 띠 Centro 1940 NS, Taft 1952 EW Hachinohe 1968 NSm Kobe 1995 NS를 사용하고 입력 지진동의 강도는 최대 지반속도치 12Kine이 되도록 크기를 조절하여 입력한다 탄소성 지진응답 해석결과 고층 벽식 아파트는 진도 5정도의 지진동 크기에서 전층에소성 변형이 발생하여 취약한 내진성능을 보여준다.

• 터널과지하공간
• /
• 제24권4호
• /
• pp.316-324
• /
• 2014

고준위 방사성 폐기물 처분시스템은 지하 500 m 심도에서 암반에 터널을 뚫어 고준위폐기물 처분용기를 넣고 주위를 완충재로 매우는 형태이다. 많은 통계 자료에 의하면 한반도에서 매년 지진이 증가하는 추세이며, 지진이 발생할 경우 지하에서 발생된 전단력에 의해 처분용기가 손상될 수 있다. 더 나아가 방사성 유해물질이 유출되어 큰 환경 문제가 유발될 수 있다. 이에 본 논문에서는 지진에 대해 안전하게 보호할 수 있는 방법으로 내진형 완충재를 개발하였다. 내진 성능에 영향을 미치는 주요인자를 분석하여 내진형 완충재를 설계하였고, ABAQUS를 이용하여 전단해석모델을 개발하여 내진형 완충재의 성능을 평가하였다.

• 토지주택연구
• /
• 제8권3호
• /
• pp.181-187
• /
• 2017

To proactively respond to internal and external changes such as the recent demographic change and rising demand for diversified housing types, this study investigated the framed-structure free plan public house model proposed by the LH to look at the seismic performance of framed-structure apartment according to damper system use through non-linear analysis. The effectiveness thereof was also examined in terms of performance and economy. As a result, the proposed damper system application method to framed-structure free plan public house model was found to meet the performance requirements of the present earthquake-resistant design (KBC2016) and effective to apply to designs. The max response displacement and max response acceleration were compared based on the nonlinear analysis. As a result, the building with damper system showed better earthquake resistance performance than earthquake-resistant structure thanks to the damper system, although the base shear of earthquake-resistant system was reduced by 20% in design. The damper system is expected to help reduce building damage while ensuring excellent earthquake resistance performance. In addition, the framework quantities of earthquake-resistant structure and structure with damping system were compared. As a result, columns were found to reduce concrete amount by about 3.9% and rebar, by about 7.3%. Walls showed about 12.6% reduction in concrete and about 10.7% in rebar. In terms of cost, framework construction cost including formwork and foundation expenses was expected to drop by about 5~6%.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.249-257
• /
• 1998

Vibration-resistant rubbers, whose elastic and shear behaviors are similar to viscoelastic materials, are used to make bracing dampers to reduce the building vibration. Experimental study is carried out to find the vibration characteristics of the dampers installed in the building model. The natural frequencies and modal damping ratios are obtained from the free vibration test and Fourier analysis. Shaking table test is performed to find the response behavior of the building model under earthquake loading. The present experimental study shows that the bracing dampers have the behavior of viscoelastic dampers, which increase the modal damping ratios and viscoelastic characteristics.

• Structural Engineering and Mechanics
• /
• 제23권2호
• /
• pp.177-193
• /
• 2006

Determining the hysteretic energy demand and dissipation capacity and level of damage of the structure to a predefined earthquake ground motion is a highly non-linear problem and is one of the questions involved in predicting the structure's response for low-performance levels (life safe, near collapse, collapse) in performance-based earthquake resistant design. Neural Network (NN) analysis offers an alternative approach for investigation of non-linear relationships in engineering problems. The results of NN yield a more realistic and accurate prediction. A NN model can help the engineer to predict the seismic performance of the structure and to design the structural elements, even when there is not adequate information at the early stages of the design process. The principal aim of this study is to develop and test multi-layered feedforward NNs trained with the back-propagation algorithm to model the non-linear relationship between the structural and ground motion parameters and the hysteretic energy demand in steel moment resisting frames. The approach adapted in this study was shown to be capable of providing accurate estimates of hysteretic energy demand by using the six design parameters.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.581-591
• /
• 2023

North Anatolian Fault Zone is tectonically active with recent earthquakes (Mw7.6 1999-Kocaeli and Mw7.2 1999-Düzce earthquakes) and it passes through Marmara region, which is highly industrialized, densely populated and economically important part of Turkey. Many power plants, located in Marmara region, are exposed to high seismic hazard. In this study, open source OpenQuake software has been used for the probabilistic earthquake hazard analysis of Marmara region and risk assessment for the specified energy facility. The SHARE project seismic zonation model has been used in the analysis with the regional sources, NGA GMPEs and site model logic trees. The earthquake hazard results have been compared with the former and existing earthquake resistant design regulations in Turkey, TSC 2007 and TBSCD 2018. In the scope of the study, the seismic hazard assessment for a typical natural gas combined cycle power plant located in Marmara region has been achieved. The seismic risk assessment has been accomplished for a typical control building located in the power plant using obtained seismic hazard results. The structural and non-structural fragility functions and a consequence model have been used in the seismic risk assessment. Based on the seismic hazard level with a 2% probability of exceedance in 50 years, considered for especially these type of critical structures, the ratios of structural and non-structural loss to the total building cost were obtained as 8.8% and 45.7%, respectively. The results of the study enable the practical seismic risk assessment of the critical facility located on different regions.

• Earthquakes and Structures
• /
• 제21권5호
• /
• pp.531-549
• /
• 2021

Analytical models were developed and seismic behaviors were analyzed for a three-story stone pagoda at the Cheollyongsa temple site, which was damaged by the Gyeongju earthquake of 2016. Both finite and discrete element modeling were used and the analysis results were compared to the actual earthquake damage. Vulnerable parts of stone pagoda structure were identified and their seismic behaviors via sliding, rocking, and risk analyses were verified. In finite and discrete element analyses, the 3F main body stone was displaced uniaxially by 60 and 80 mm, respectively, similar to the actual displacement of 90 mm resulting from the earthquake. Considering various input conditions such as uniaxial excitation and soil-structure interaction, as well as seismic components and the distance from the epicenter, both models yielded reasonable and applicable results. The Gyeongju earthquake exhibited extreme short-period characteristics; thus, short-period structures such as stone pagodas were seriously damaged. In addition, we found that sliding occurred in the upper parts because the vertical load was low, but rocking predominated in the lower parts because most structural members were slender. The third-floor main body and roof stones were particularly vulnerable because some damage occurred when the sliding and rocking limits were exceeded. Risk analysis revealed that the probability of collapse was minimal at 0.1 g, but exceeded 80% at above 0.3 g. The collapse risks at an earthquake peak ground acceleration of 0.154 g at the immediate occupancy, life safety, and collapse prevention levels were 90%, 52%, and 6% respectively. When the actual damage was compared with the risk analysis, the stone pagoda retained earthquake-resistant performance at the life safety level.