• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.101-104
• /
• 2004

If predicting of compressive strength of construction in construction field at early age is possibile, rational strength management & schedule plan is possible. With method for predicting strength of concrete, many researchers have been making study of maturity method. On the other hand, nowadays rationalization of construction capacity and reduction of a term of works due to improvement of construction capacity and application of a new method of construction is gathering strength with important issue. In accordance with this present condition, construction is being progressed in winter, but proper construction mothed and countermeasure for strength management is not established in case of winter construction. Therefore to investigate application in construction field at winter of strength prediction model that developed at former study, this study aim to measure application of developed strength prediction model through manufacture of mock-up concrete according to kind of strength level at 5$^{\circ}C$.

• International Journal of Concrete Structures and Materials
• /
• 제10권1호
• /
• pp.113-124
• /
• 2016

This paper presents the effect of silica fume and nano silica, used individually and in combination with the set accelerator and/or hydrated lime, on the properties of class F high volume ultra fine fly ash (HV-UFFA) cement composites, replacing 80 % of cement (OPC). Compressive strength test along with thermogravimetric analysis, X-ray diffraction and scanning electron microscopy were undertaken to study the effect of various elements on the physico-chemical behaviour of the blended composites. The results show that silica fume when used in combination with the set accelerator and hydrated lime in HV-UFFA cement mortar, improves its 7 and 28 day strength by 273 and 413 %, respectively, compared to the binary blended cement fly ash mortar. On the contrary, when nano silica is used in combination with set accelerator and hydrated lime in HV-UFFA cement mortar, the disjoining pressure in conjunction with the self-desiccation effect induces high early age micro cracking, resulting in hindering the development of compressive strength. However, when nano silica is used without the additives, it improves the 7 and 28 day strengths of HV-UFFA cement mortar by 918 and 567 %, respectively and the compressive strengths are comparable to that of OPC.

• Advances in concrete construction
• /
• 제6권1호
• /
• pp.69-85
• /
• 2018

In order to provide sufficient stability and resistance against bleeding and segregation during transportation and placing, mineral admixtures are often used in self-compacting concrete mixes (SCC). These fine materials also contribute to reducing the construction cost and the consumption of natural resources. Many studies have confirmed the benefits of these mineral admixtures on properties of SCC in standard curing conditions. However, there are few published reports regarding their effects at elevated curing temperatures. The main objective of this study is to investigate the effect of three different mineral admixtures namely limestone powder (LP), granulated blast furnace slag (GS) and natural pozzolana (PZ) on mechanical properties and porosity of SCC when exposed to different curing temperatures (20, 40, 60 and $80^{\circ}C$). The level of substitution of cement by mineral admixture was fixed at 15%. The results showed that increasing curing temperature causes an improvement in performance at an early age without penalizing its long-term properties. However the temperature of $40^{\circ}C$ is considered the optimal curing temperature to make economical and high performance SCC. On the other hand, GS is the most suitable mineral admixture for SCC under elevated curing temperature.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.66-67
• /
• 2013

Replacing a large amount of ground granulated blast furnace slag is limited because early age strength is low due to latent hydraulic property despite excellence of long-term strength. This study aimed to examine produceableness of high-activated ground granulated blast furnace slag using slag by-product from steel process. As experimental variable, the properties of strength development were analyzed by setting fineness and replacement ratio of slag by-product, curing conditions, and W/B. The results of study showed that high-activated ground granulated blast furnace slag using slag by-product as an activator improve the compressive strength of mortar. It is expected to be used as binder for secondary product of concrete considering curing and mixing conditions because high-activated ground granulated blast furnace slag can be hydrated by itself.

• Structural Engineering and Mechanics
• /
• 제69권1호
• /
• pp.1-10
• /
• 2019

In the construction of flat plate slabs, which are widely used for tall buildings but have relatively low flexural stiffness, serviceability problems such as excessive deflections and cracks are of great concern. To prevent excessive deflections at service load levels, current design codes require the minimum slab thickness, but the requirement could be unconservative because it is independent on loading and elastic modulus of concrete, both of which have significant effects on slab deflections. In the present study, to investigate the effects of the construction load of shored slabs, reduced flexural stiffness and moment distribution of early-age slabs, and creep and shrinkage of concrete on immediate and time-dependent deflections, numerical analysis was performed using the previously developed numerical models. A parametric study was performed for various design and construction conditions of practical ranges, and a new minimum permissible thickness of flat plate slabs was proposed satisfying the serviceability requirement for deflection. The proposed minimum slab thickness was compared with current design code provisions and numerical analysis results, and it agreed well with the numerical analysis results.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.915-918
• /
• 2008

수화열 및 자기수축은 동일한 수화반응에 의해 필연적으로 발생되는 현상으로서 여러 연구자들에의해 수화온도와 자기수축의 깊은 상관성은 언급되어 왔으나, 아직까지 수화온도와 자기수축의 구체적인 관계에 대한 연구보고는 거의 없는 실정이다. 이에 본 연구에서는 시험체의 단면크기를 달리하여 초기 수화발열 및 자기수축의 특성을 구체적으로 분석한 후, 내부 수화온도와 자기수축의 상관성을 검토하였다. 그 결과, 시험체 단면이 증가할수록 전체적인 내부온도와 자기수축은 증가하였으며, 수화발열상승구간 및 자기수축증가구간에서 발생하는 수화온도 상승량 및 상승률, 자기수축 증가량 및 증가율은 증가하였다. 수화발열상승속도 및 자기수축증가속도가 증가할수록 구간에서 발생하는 수화온도상승량과 자기수축증가량은 증가한 반면, 수화온도상승률과 자기수축증가율은 유사하게 나타났으며, 수화발열상승 속도가 증가할수록 자기수축증가구간의 자기수축증가량과 자기수축증가속도는 증가하였다.

• 콘크리트학회지
• /
• 제7권6호
• /
• pp.186-196
• /
• 1995

본 연구에서는 국내에서 생산되는 시멘트의 발열상태에 대한 정량화를 목적으로 A시멘트사에서 생산되는 보통포틀란드시멘트를 그 대상으로 하여 단위시멘트량 및 타설온도를 주요변수로 한 단열온도 상승시험을 실시하여 각 변수가 콘크리트의 단열온도 상승량 및 발열속도에 미치는 영향을 검토하였고, 현재 시방서에 제시되어 있는 단열온도 상승시험 결과에 대하여 재검토를 하였다. 또한 이러한 시험결과가수치해석법에서 어떠한 영향을 미치는 가를 검토하였다. 검토결과 보통포틀란드시멘트에 대해서 시방서에 제시되어 잇는 단열온도상승량은 실제보다 과대평가하고 있으며, 시방서에 제시되어 있는 2-parameter 식 형태는 발열상태를 과대평가하고 있으며 이 식보다는 3- parameter식이 시멘트의 발열상태를 더 잘 근사하고 있음을 알았다. 또한 단열온도상승시험을 통해 얻어진 결과와 시방서에 제시된 값을 사용한 경우를 각각 수치해석법으로 해석한 결과, 온도는 큰 차이가 없었으나 온도응력은 외부구속이 강한 경우에는 약 20%정도가 큰 안전측의 해석결과를 나타내 시공계획 수립시에는 주의하지 않으면 안된다는 것을 알았다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.657-660
• /
• 2008

본 연구에서는 고로슬래그 미분말이 콘크리트의 초기 수화발열 및 자기수축 특성에 미치는 영향을 정량적으로 분석하고자 하였다. 특히 수화열 및 자기수축이 급격하게 증가하는 구간의 데이터에 대한 통계적인 분석을 실시하여 각각의 발현성상을 정량적인 계수로 표현할 뿐만 아니라 그 계수를 활용하여 수화열과 자기수축의 상관관계를 분석하고자 하였다. 그 결과 고로슬래그 미분말을 사용한 콘크리트의 수화온도 및 자기수축이 급속히 증가하는 구간은 OPC에 비해 지연되는 것으로 나타났으며, 각각의 배합별 수화온도 및 자기수축 급속 증가구간에서의 기울기는 매우 유사한 것으로 나타났다. 또한, 고로슬래그 미분말을 사용함으로써 OPC에 비해 수화발열상승속도 및 자기수축증가속도가 저감되었으며 최종적으로 자기수축량도 조절이 가능할 것으로 사료된다.

• 한국도로학회논문집
• /
• 제9권3호
• /
• pp.101-110
• /
• 2007

국내 줄눈콘크리트 포장의 줄눈간격은 6m로 획일적으로 설계 건설되어 왔으며 이에 대한 과학적 근거는 제시된 바 없었다. 현재 진행중인 한국형 포장설계법 개발에서는 국내 지역별 기후조건 등을 고려하여 줄눈간격 변화에 따른 줄눈콘크리트 포장의 장 단기 파손을 역학적-경험적 방법을 토대로 분석하여 줄눈간격을 지역별로 $6{\sim}8m$로 설계할 것을 제시한 바 있다. 본 연구는 한국형 포장설계법에서 제시한 줄눈간격 잠정안에 대한 타당성을 검증하기 위한 연구의 일환이다. 줄눈간격이 증가할 경우 시공초기에 하중전달률의 변화, 무작위균열 등의 발생가능성에 문제점이 없는지를 검증하기 위해서 한국형 포장설계법의 줄눈간격 잠정안에서 줄눈간격이 7m로 제시된 지역에 대해서 7m 줄눈간격으로 시험시공하고 초기거동을 모니터링 하였다. 하중전달률, 무작위균열, 줄눈폭변화 등 모니터 링 결과를 시공조건이 동일한 인접 6m 줄눈간격 비교구간의 초기거동과 비교분석하였다.

• Structural Engineering and Mechanics
• /
• 제50권5호
• /
• pp.635-652
• /
• 2014

Creep and shrinkage behaviour of an ultra lightweight cement composite (ULCC) up to 450 days was evaluated in comparison with those of a normal weight aggregate concrete (NWAC) and a lightweight aggregate concrete (LWAC) with similar 28-day compressive strength. The ULCC is characterized by low density < 1500 $kg/m^3$ and high compressive strength about 60 MPa. Autogenous shrinkage increased rapidly in the ULCC at early-age and almost 95% occurred prior to the start of creep test at 28 days. Hence, majority of shrinkage of the ULCC during creep test was drying shrinkage. Total shrinkage of the ULCC during the 450-day creep test was the lowest compared to the NWAC and LWAC. However, corresponding total creep in the ULCC was the highest with high proportion attributed to basic creep (${\geq}$ ~90%) and limited drying creep. The high creep of the ULCC is likely due to its low elastic modulus. Specific creep of the ULCC was similar to that of the NWAC, but more than 80% higher than the LWAC. Creep coefficient of the ULCC was about 47% lower than that of the NWAC but about 18% higher than that of the LWAC. Among five creep models evaluated which tend to over-estimate the creep coefficient of the ULCC, EC2 model gives acceptable prediction within +25% deviations. The EC2 model may be used as a first approximate for the creep of ULCC in the designs of steel-concrete composites or sandwich structures in the absence of other relevant creep data.