• Preventive Nutrition and Food Science
• /
• v.7 no.1
• /
• pp.37-42
• /
• 2002

Factors affecting the production of bacterial cellulose and organic acids in Kombucha fermentation were investigated. Kombucha was obtained by the fermentation (for 12 days at 3$0^{\circ}C$) of the green/black tea extract, supplemented with 10% white sugar, using an Oriental tea fungus as starter. Hitgher initial pH increased acid production with decreased cellulose production. With a cellulose pellicle or tea fungus broth as a starter, a 1~3 mm thick cellulose layer developed as a top layer every four days, and was removed subsequently while continuing fermentation. Addition of 30 mL tea fungus broth (13%, v/v) in Kombucha fermentation resulted in maximum production of a cellulose pellicle, indicating weak acid production. Yield of cellulose production at an early stage of fermentation was also higher when Kombucha was inoculated with a cellulose pellicle. In fact, addition of 1% (v/v) alcoholic beverage in the Kombucha fermentation activated the cellulose production, coupled with four times higher acid production.

• Advances in environmental research
• /
• v.3 no.1
• /
• pp.1-9
• /
• 2014

Effect of automobile polluted soil with five soil concentration (0 (Control), 25, 50, 75 and 100%) was observed on early seedling growth performance and biomass production of Neem (Azadirachta indica A. Juss). The treatment of 75% automobile polluted soil significantly (p < 0.05) decreased the seedling length (18.60 cm) of A. indica. The automobile polluted soil treatment with the concentration of 50% slightly increased the root length as compared to control. The automobile polluted soil treatment with the concentration of 25, 50, 75 and 100% negatively affected shoot length of A. indica as compared to control. The treatment of all concentration of automobile polluted soil progressively decreased the total leaf area A. indica as compared to control soil treatment. The automobile polluted soils also showed negative effects on biomass production of A. indica. The automobile polluted soil treatment at 25% concentration significantly (p < 0.05) affected shoot, leaves and seedling dry weight of A. indica as compared to control soil treatment. The order of relationship between production of A. indica's seedling dry weight and automobile polluted soil treatment was observed as root > shoot > leaves > total seedling.

• Korean Journal of Organic Agriculture
• /
• v.15 no.4
• /
• pp.399-411
• /
• 2007

Korean organic farming has been well developed over the last two decades. It demonstrates that the number of certificated farm for organic agriculture and products have been drastically increased in recent year. However, the organic farmers have thought that organic farming rely only on organic fertilizer and they don't keep organic farming principle in which organic farmer should enhance biological activity and crop rotation. This study was to compare nutrient input, recommendation, cropping system and organic product circulation between the early $20^{th}$ century and beginning of the $21^{st}$ century. The population of Korea has increased 7.3 times more than that of a century ago but cultivated land has been decreased during 100 years. The rice production in 2002 was 4.2 times higher than that of production in 1912. The input of N, P and K in 1907 on the basis of King's suggestion was 95.6kg/ha, 15.9kg/ha and 3.0kg/ha, respectively. Nitrogen came from excreta (40%), green manure (55%) and compost (5%) in the early 20th century. On the other hand, organic farmer input organic resources such as wood chip (30.1%), compost (27.8%), rice straw (14%) and others (25%) these days. In terms of nutrient balance calculated nutrient and absorption by plants, organic rice farmer apply excessive nitrogen and phosphorus to the soil. They was used to put $7{\sim}10$ times more nitrogen than that of a century ago. Nutrient recommendation was similar in N and P between early 20th century and early $21^{st}$ century. Farmers in both century did not rotate crops in the field. Today, organic farmers engaged in more continuous cultivation than in early 20th century. Farmers in the early $20^{th}$ century produced locally, consumed locally the agricultural products, but organic farmers in the $21^{st}$ century produce the organic product in the local farmland and consumed in the large city and also a lot of foreign organic products have been imported in recent year.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.3
• /
• pp.451-461
• /
• 1993

Four hundred and eighty broiler chicks of both sexes were obtained from commercial hatchery (Hubbard) and raised on floor pens. All chicks were allowed free access to food from 0 to 7 and 20 to 56 days of age. At 7 days of age, all broilers were weighed individually, and divided into five groups as follows: 1. feed ad libitum as the control; 2. allowed free access to food 3 days and starved 1 day ($3{\times}1$); 3. allowed free access to food 2 days and starved 1 day ($2{\times}1$); 4. allowed free access to food 1 day and starved 1 days ($1{\times}1$) and; 5. allowed free access to food 2 days and starved 2 days ($2{\times}2$). Broilers were restricted for 12 days (d 7 through 17) of a 56-day trial. Broilers were fed a commercial starter diet (crude protein 23.8% and ME 3,070 kcal/kg) for 21 days, and commercial finisher diet (crude protein 20% and ME 3,160 kcal/kg) from 22 to 56 days of age. Although there was compensatory growth in some groups, (the $1{\times}1$ female group, and the $3{\times}1$ and $2{\times}1$ male grous), its level was not sufficient to achieve normal body weight at market age. There was sexual dimorphism for accelerated growth as well as differences in the ability to achieve a complete compensation of growth to the weight, feed conversion ratio, and body composition of ad libitum chicks. Early feed restriction could be used to reduce production cost because of the lower fed conversion ratio, mortality rate and the amount of starter diet consumed by broilers. The response of chicks to early feed restriction might depend on the degree of feed restriction, the method of feed restriction, duration of feed restriction, and sexes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.7
• /
• pp.930-938
• /
• 2019

Objective: Estimate genetic parameters, the rate of inbreeding, and the effect of inbreeding on growth and egg production traits of a Thai native chicken breed Lueng Hang Kao Kabinburi housed under intensive management under a tropical climate. Methods: Genetic parameters were estimated for weight measured at four weekly intervals from body weight at day 1 (BW1D) to body weight at 24 weeks (BW24) of age, as well as weight at first egg, age at first egg (AFE), egg weight at first egg, and total number of eggs (EN) produced during the first 17 weeks of lay using restricted maximum likelihood. Inbreeding depression was estimated using a linear regression of individual phenotype on inbreeding coefficient. Results: Direct additive genetic effect was significant for all traits. Maternal genetic effect and permanent environmental hen effects were significant for all early growth traits, expect for BW24. For BW24, maternal genetic effect was also significant. Permanent environmental hen effect was significant for AFE. Direct heritabilities ranged from 0.10 to 0.47 for growth traits and ranged from 0.15 to 0.16 for egg production traits. Early growth traits had high genetic correlations between them. The EN was lowly negatively correlated with other traits. The average rate of inbreeding for the population was 0.09% per year. Overall, the inbreeding had no effect on body weight traits, except for BW1D. An increase in inbreeding coefficient by 1% reduced BWID by 0.09 g (0.29% of the mean). Conclusion: Improvement in body weight gain can be achieved by selecting for early growth traits. Selection for higher body weight traits is expected to increase the weight of first egg. Due to low but unfavorable correlations with body weight traits, selection on EN needs to be combined with other traits via multi-trait index selection to improve body weight and EN simultaneously.

• Journal of Hydrogen and New Energy
• /
• v.16 no.1
• /
• pp.17-24
• /
• 2005

We experimented on growth in light and production of hydrogen and organic matters in dark fermentation by using C. reinhardtii. In the light, growth rate of C. reinhardtii following $CO_2$ fixation was proportional to consumption rate of nitrogen source. And the starch in cell was accumulated more when the period of culture was lengthened more. But the accumulation rate of starch in cell was decreased when the growth rate of cell become dull. In the dark fermentation, the production volume and production rate of hydrogen were the highest value in the mid exponential state among other states. The utilization efficiency of substrate was better in the early exponential state than other states. In production of organic matters, acetic acid didn't change remarkably and ethanol showed the highest value in early exponential state.

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.4
• /
• pp.565-570
• /
• 1989

The influence of age at first calving on the milk production of crossbred dairy cows produced under major dairy cattle crossbreeding projects in Pakistan was studied from the year 1974 to 1980. These animals were bred and raised at the Livestock Production Research Institute, Bahadarnagar (LPRI), Livestock Experiment Station, Karachi (LES) and the University of Agriculture, Faisalabad (UAF). Local Sahiwal (SWL) cattle were crossed with the European breeds, Holstein Friesian (HF) and Jersey (J) at LPRI and UAF. At LES, native Red Sindhi (RS) were crossed with the HF and J breeds. At LES and UAF, the crossbred progeny, thus, produced comprised of halfbreds only while at LPRI 3/4 HF, 3/4 J, 1/4 HF and 1/4 J groups were also available for this study. The average age at first calving was considerably higher among the native breeds. At LES, the RS calved for the first time at an age of approximately 56 months. Corresponding values for SWLs at LPRI and UAF were 44 and 64 months, respectively. The 1/2 HF and 1/2 J crossbreds calved first at the age of approximately 25, 26, 34, 36, 37 and 38 months at LPRI, LES and UAF respectively. For 3/4 HF, 3/4 K, 1/4 HF and 1/4 J groups of LPRI the average age at first calving was 29, 26, 34 and 33 months. Considerable differences in age at first calving between the crossbreds and native breeds were observed. Due to early maturity, the former attained the peak level of milk production in third lactation whereas the latter groups, because of late maturity, reached this level in their fourth lactation. This study suggested that early maturity in Zebu cattle (Box indicus) could be induced through crossbreeding with European cattle (Bos Taurus).

• International journal of advanced smart convergence
• /
• v.9 no.1
• /
• pp.82-89
• /
• 2020

This study is a design study related to the application of 3D printer technology for garment printing. Knitting, which used to be a home industry in the early days, originally comes from hand-knitting. This evolved with various personal devices as a small job for the self-sufficiency of early European housewives. In addition, since the Industrial Revolution, mechanical production entered the mass production mass supply system, and various apparel products were provided to consumers in accordance with mass standardized dimensions. This is similar to the development process in Korea. In addition, it has formed a considerable market with the situation that it can produce and supply apparel products at low labor costs of first-generation Namdaemun and Dongdaemun merchants. As the production shifted to the Southeast Asian region due to the increase in labor costs in the domestically developed social situation, the production of garment products in Korea is now almost 5%. As a result, apparel-related production facilities and related companies are constantly moving to other countries to move production facilities sensitively due to rising labor costs. Recently, smart factory automation has been planned to explore new possibilities. In addition, in recent years, with the evolved appearance of consumers, the appropriate supply of the right amount of production has appeared, and the 3D printer applied to personal garment output has attracted considerable interest in the customized market. Therefore, in order to become a new hope and a small addition to various clothing workers, this study conducted related research on the following 3D printers for clothing output and attempted to proceed with a new design.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.43-48
• /
• 2001

The use of fly ash in cement and concrete industries has many benefits including engineering, economic, and ecological aspects. However, it has a disadvantage of low strength development, especially at early ages. In this study, in order to overcome this problem, the early strength accelerating agent($NA_{2}$ $SO_{4}$) was selected and applied to the production of high strength concrete(HSC) containing fly ash. It was found that the compressive strength of fly ash concrete incorporating TEX>$NA_{2}$ $SO_{4}$ has greater than that of concrete containing fly ash only until 7 days after casting. From the microstructural point of view, ettringite increased and pores decreased in fly ash concrete incorporating TEX>$NA_{2}$ $SO_{4}$ , leading to the development of early age strength. It was also found that the velocity vs. strength relationship of HSC is considerably different from that of low-strength concrete(LSC). Therefore, in order to predict early age strength of HSC, a estimation equation different from that for LSC is needed.

• Animal Bioscience
• /
• v.37 no.8
• /
• pp.1387-1397
• /
• 2024

Objective: The objective of the current study was to find out the independent and interactive effects of prilled fat supplementation with protein on the production performance of early lactating Nili Ravi buffaloes. Methods: Sixteen early lactating buffaloes (36.75±5.79 d in milk; mean±standard error) received 4 treatments in 4×4 Latin-square design according to 2×2 factorial arrangements. The dietary treatments were: i) low protein low fat, ii) low protein high fat, iii) high protein low fat, and iv) high protein high fat. The dietary treatments contained 2 protein (8.7% and 11.7% crude protein) and fat levels (2.6% and 4.6% ether extract) on a dry matter basis. Results: The yields of milk and fat increased with increasing protein and fat independently (p≤0.05). Energy-, protein-, and fat-corrected milk yields also increased with increasing protein and fat independently (p≤0.05). Increasing dietary protein increased the protein yield by 3.75% and lactose yield by 3.15% and increasing dietary fat supplies increased the fat contents by 3.93% (p≤0.05). Milk yield and fat-corrected milk to dry matter intake ratios were increased at high protein and high fat levels (p≤0.05). Milk nitrogen efficiency was unaffected by dietary fat (p>0.10), whereas it decreased with increasing protein supplies (p≤0.05). Plasma urea nitrogen and cholesterol were increased by increasing protein and fat levels, respectively (p≤0.05). The values of predicted methane production reduced with increasing dietary protein and fat. Conclusion: It is concluded that prilled fat and protein supplies increased milk and fat yield along with increased ratios of milk yield and fat-corrected milk yields to dry matter intake. However, no interaction was observed between prilled fat and protein supplementation for production parameters, body weight, body condition score and blood metabolites. Predicted methane production decreased with increasing protein and fat levels.