• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.2
• /
• pp.98-105
• /
• 2020

This experiment was conducted to a comparison of the productivity according to variety and forage quality by plant parts of imported silage corn (Zea mays, L) in Pyeongchang. The corns evaluated in this experiment were 8 varieties (P1184, P1151, P1194, P1543, P1345, P1429, P1443, and P2105) introduced from the United States, Pioneer Hybrid Co. The harvested corn was divided into 5 plant parts (leaf, stem, cob, husk, and grain), and the ratio of each part was calculated using dry weight and the feed value was analyzed. The emergence rate of corn was generally good except for the P1151 and P2105 varieties. The average tasseling date was July 24^th and the silking date was July 27^th, but the P2105 variety was late to July 28^th and August 1^st, and the remaining varieties were similar. P1345 was the highest (289 and 123 cm), and P1151 varieties were the lowest (267 and 101 cm) in the plant and ear height. Disease resistance was low in P1184, P1443 and P1429, and P1197 and P1345 were high. In the case of stover, the dry matter (DM) content was the lowest at 19.6% in the P1151 and the highest at 24.9% in the P1429. DM content of ear was the highest in the P2105 (55.5%), and P1184 (54.2%) and P1345 (54.3%) were also significantly higher (p<0.05). The DM yield of stover of P2105, P1429 and P1194 varieties was significantly higher (p<0.05), and ear yield of P2105, P1345 and P1443 was higher. The proportions of each part of plants (leaf, stem, cob, husk, and grain) divided by 5 was high, with 50-60% of the ear(grain+cob) ratio. The ratio of husk and cob was roughly similar, and the leaf and stem part showed a ratio of about 20%. The crude protein (CP) content was highest in leaf, followed by grain. The CP content of the stem was the lowest, and the husk was not significantly different among the varieties (p>0.05). The acid detergent fiber (ADF) content was similar to the rest parts except grain, but the leaf part tended to be lower, and other parts except the stem and leaf showed no significant difference between varieties (p>0.05). There was no significant difference in NDF (neutral detergent fiber) content in husk, but there was a difference between varieties in other parts (p<0.05). In addition, there was a special difference by plant parts for each variety, P2015 on the stem, P1197 on the leaf, P1151 on the cob, P1197 on the husk, and P1197 on the grains with high NDF content. IVDMD (in vitro dry matter digestibility) was not significantly different between stems and grains, but there was a difference between varieties in cobs and husks. According to the results, DM yield of P2105 variety was the best in the experiment, and the ratio of grain was excellent in P1543 and P1345. In addition, it was found that the feed value was higher in the leaves and grains, and the leaf and stem had higher feed values than husk or cob.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.245-255
• /
• 2002

This thesis deals a method to deliver more realistic sound by cancelling the cross-talk which is inherent to the 5.1 channel speaker system. The acoustical model for cross-talk cancellation is the free field model. This model minimizes distortion of sound. I used the bark scale sound quality compensation which based on psycho-acoustic. For the surround channels, band-limited sound quality compensation is performed in the frequency domain. I also performed the sound quality assessment test on the traditional 2 channel stereo and 5.1 channel system. This test is performed in the test chamber which satisfies the ITU-R specifications. I uses the IACC (Inter-Aural Cross-Correlation) to determine the preferences of the amateur and the golden ear experts to asses the trans-aural filter. According to the result from the proposed method, I got more the 38 dB separation rates with the Dolby standard speaker array. The results on the diffusion by the subjective test with the experts shows 0.4 point increased then before.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.2
• /
• pp.99-108
• /
• 2004

This thesis deals a method to deliver more realistic sound by cancelling the cross-talk which is inherent to the 5.1 channel speaker system. The acoustical model for cross-talk cancellation is the free field model. This model minimizes distortion of sound. I used the bark scale sound quality compensation which based on psycho-acoustic. For the surround channels, band-limited sound quality compensation is performed in the frequency domain. I also performed the sound quality assessment test on the traditional 2 channel stereo and 5.1 channel system. This test is performed in the test chamber which satisfies the ITU-R specifications. I uses the IACC(Inter-Aural Cross-Correlation) to determine the preferences of the amateur and the golden ear experts to asses the trans-aural filter. According to the result from the proposed method, I got more the 38㏈ separation rates with the Dolby standard speaker array. The results on the diffusion by the subjective test with the experts shows 0.4 point increased then before.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.345-352
• /
• 2004

This paper deals a method to deliver more realistic sound by cancelling the cross-talk which is inherent to the 5.1 channel speaker system. The acoustical model for cross-talk cancellation is the free field model. This model minimizes distortion of sound. 1 used the bark scale sound quality compensation which based on psycho-acoustic. For the surround channels, band-limited sound quality compensation is performed in the frequency domain. I also performed the sound qualify assessment test on the traditional 2 channel stereo and 5.1 channel system. This test is performed in the tort chamber which satisfies the ITU-R specifications. 1 uses the IACC(Inter-Aural Cross-Correlation) to determine the preferences of the amateur and the golden ear experts to asses the trans-aural filter. According to the result from the proposed method, I got more the 38dB separation rates with the Dolby standard speaker array. The results on the diffusion by the subjective test with the experts shows 0.4∼0.5 point Increased then before.

• Journal of Nutrition and Health
• /
• v.51 no.6
• /
• pp.538-555
• /
• 2018

Purpose: This study examined the association of the type and frequency of coffee consumption with the health-related quality of life and metabolic bio-markers in adult men and women from the 2013 ~ 2016 Korea National Health and Nutrition Examination Survey (KNHANES). Methods: A total of 11,201 subjects (4,483 men and 6,718 women) were classified according to the type of coffee consumption (non-coffee, black coffee, 3-in-1 coffee) and type and frequency of coffee consumption (non-coffee, ${\leq}2$ times/day of black coffee, > 2 times/day of black coffee, ${\leq}2$ times/day of 3-in-1 coffee, > 2 times/day of 3-in-1 coffee) using food frequency questionnaires. Dietary nutrient intake data were assessed using food frequency questionnaires. The health-related quality of life was measured using the EuroQol-5 dimension (EQ-5D) and EQ-5D index score. Data on metabolic bio-markers were obtained from a health examination. Results: Among men and women, the proportion of subjects with an energy intake below the estimated energy requirement (EER) was lower among the 3-in-1 coffee consumption group, and the proportion of subjects with iron intakes below the estimated average requirements (EAR) was lower among the 3-in-1 coffee consumption group. Women (OR: 0.810, 95% CI: 0.657 ~ 0.998) with the ${\leq}2$ times/day of 3-in-1 coffee had a lower risk of impaired health-related quality of life (lowest 20% level in the EQ-5D score) compared to the non-coffee consumers after a multivariable adjustment. In both men and women, the type and frequency of coffee consumption was not associated with metabolic bio-markers risk after multivariable adjustment. Conclusion: These results suggest that 3-in-1 coffee consumption may be associated with a lower risk of impaired health-related quality of life and may not be associated with the metabolic bio-markers risk in adult men and women.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.4
• /
• pp.253-258
• /
• 2002

NC+4880, a forage com hybrid, is bred by NC+hybrids Co. in US, and Gast 8396 IT is by Garst Seeds Co. We have tested these two cultivars in Suwon and Chonan over three years to test their regional yield trial. Through above experiments, the excellence is testified, in result, they are determined as new recommended cultivars by NACF. The main characteristics of these cultivars are as tallows ; 1. NC+4880 a. The seed coat is yellow, the mean tasseling date is 7th of July and it takes about 74 days from emergence to tasseling date. This hybrid is a day ahead and the culm length is 242 cm, moreless shorter comparing with a check hybrid, Suwon 19. The ear height 117 cm which is short and its stay green is moderate. b. It shows resistance to H maydis, and MBSDV is barely observed and its stay green is moderate. c. The fresh yield, dry matter yield, and TDN yield per a ha are 55.4 tons, 18.3 tons, 12.4 tons, respectively, which are increased by 6%, 7%, and 9%, respectively, comparing with a check hybrid, Suwon 19. The percent ear among total dry matter yield is 50.9%. 2. Garst 8396 IT a. The seed coat is yellow, the mean tasseling date is 9th of July and it takes about 76 days from emergence to tasseling date. This hybrid represent a day delayed compared with a check hybrid, Suwon 19. The Culm length and the ear height are 275 cm, and 138 cm, respectively. b. It resists moderately to H. maydis, and highly resists to lodging in the field conditions. MBSDV is barely observed and its stay green is moderate. c. The fresh yield per a ha is 64.9 tons, dry matter yield, 20.9 tons, and TDN, 13.8 tons, respectively, which are increased by 25%, 23%, and 22% comparing with a check hybrid, Suwon 19. The percent ear among total dry matters is 43.3%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.269-277
• /
• 2019

It is important to determine sowing date as it decisively affects the quality as well as quantity of waxy corn. In the central northern area of Korea, optimum sowing date of waxy corn is May and requires about 20-26 reproductive growth days from silking date to harvest. We determined adaptable sowing date of waxy corn varieties using growing degree days (GDDs), especially in the central northern area. Earlier sowing required many more emergence days owing to the low temperature. All waxy corn varieties required about 16~22 emergence days when sown in April. Otherwise, less than 15 emergence days were needed for sowing from May to August. Sowing dates to maximize ear yield of waxy corns were different depending on the eco-types of corn varieties as well as GDDs during the growth period. Early maturity type Mibaek2' showed the highest ear yield at the May $15^{th}$ sowing date. Middle maturity 'Iimichal' and late maturity 'Chalok4' showed the highest ear yield at the May $25^{th}$ and June $5^{th}$ sowing dates, respectively. GDDs of 26 days after silking was an index to determine the highest yield sowing date of 'Mibaek2'. The total GDDs from sowing to harvest and to silking were other indexes to determine the highest yield sowing date of 'Ilmichal' and 'Chalok4', respectively. Generally, it required about $2,400^{\circ}C$ GDDs from sowing date to maturity and at least 65 days of silking date from sowing to obtain about 1,200kg of ear yield of waxy corn in the central northern area of the Korean peninsula. The results of the study will be helpful for corn farmhouses to determine optimum sowing date of waxy corn in the central northern area of Korea.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.554-558
• /
• 2011

A single cross hybrid, 'Eolrukchal 1', is a bicolor waxy corn (Zea mays L.) developed by the maize breeding team at the National Institute of Crop Science (NICS), RDA in 2007. This hybrid, which has a high eating quality, was produced by crossing two inbred lines, KBW23 and KW33. KBW23 was a seed parent and KW33 was a the pollen parent of 'Eolrukchal 1'. Ear length and diameter of 'Eolrukchal 1' is 18.4 cm and 4.5 cm, respectively. The ratio of kernel set length/ear length is 89%, similar with that of a check hybrid, 'Chalok 1'. It is resistant to Exserohilum turcicum (Northern corn leaf blight) and its lodging resistance is higher than that of 'Chalok 1'. The yield of 'Eolrukchal 1' in fresh ear weight was 9.80 ton/ha and 14% higher than that of 'Chalok 1' in regional yield trials (RYT) from 2005 to 2007. A seed production of this hybrid has been well due to good match during crossing between the seed and the pollen parents. It is adaptable to the whole country except Jeju-do.

• Korean Journal of Community Nutrition
• /
• v.15 no.3
• /
• pp.297-307
• /
• 2010

This study was intended to investigate the relation between nutrient status and food diversity of elementary school students in Daegu-Kyungpook area. The subjects were 164 elementary school students (82 boys, 82 girls) who participated in "Dietary Intake Survey of Infants, Children and Adolescents" conducted by Korea Food & Drug Administration and Korea Health Industry Development Institute. We analyzed the nutritional status for two non-consecutive days by 24 hour recall method. Adequacy of dietary intake was evaluated by the proportion of subjects consuming nutrients less than Estimated Average Requirements (EAR). Food diversity was compared by using Dietary Diversity Score (DDS) and Dietary Variety Score (DVS). Nutrients intake was significantly higher in boys than girls. Subjects who consumed all food groups showed higher intake of energy and other nutrients. Boys maintained better diet quality than girls, measured by Dietary Diversity Score (DDS) as well as Dietary Variety Score (DVS). Based on these results, nutrition education for elementary school students should focus on the importance of consuming all food groups with more attention for girls.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.301-306
• /
• 2002

This paper presents the use of the neural network technology to establish a mathematical model for predicting bead geometry (top-bead width, top-bead height, back-bead width and back-bead height) for multi-pass welding, and understand relationships between process parameters and bead geometry for robotic GMA welding process. Using a series of robotic arc welding, additional multi-pass butt welds were carried out in order to verify the performance of the developed neural network model. The results show that not only the proposed model can predict the bead geometry with reasonable accuracy and guarantee the uniform weld quality, but also the neural network model could be better than the linear and curvilin ear equations developed from Lee [8].