• 한국작물학회지
• /
• 제29권1호
• /
• pp.62-66
• /
• 1984

옥수수 변형단교잡종 채종재배에 있어서 웅주간파 ♂♀ 1 : 2, 2 : 4 등의 파종양식과 재식밀도가 종자친의 생육 및 채종량과 화분친의 웅수특성에 미치는 영향을 구명하고자 1983년 제천옥의 종자친 KS8/B68과 화분친 KS5를 공시하여 시험한 결과를 요약하면 다음과 같다. 1. 개화기 및 간장은 파종양식이나 재식밀도에 크게 영향을 받지 않았고 종자친의 착수고는 파종양식간에는 차이가 없었으나 재식밀도가 증가함에 따라 직선적으로 증가하였다. 2. 종자친의 100주당 수수는 10a당 종자친 3,500본에서는 파종양식간에 비슷하나 5,000본 이상에서는 2 : 4 재배보다 웅주간파나 1 : 2재배에서 많았으며 재식밀도 증가에 따라 파종양식에 관계없이 직선적으로 감소하였다. 수당입수는 파종양식간에는 차이가 없고 파종양식과 재식밀도의 상호작용도 유의하지 않았으나 재식밀도 증가에 따라 작아졌다. 100입중은 25g 내외로 처리간 차이가 없었다. 3. 화분친의 화분이 제한되지 않은 조건에서의 채종량은 웅주간파, 1 : 2재배, 2 : 4재배순으로 많은 경향이였고 10a당 종자 친 3,500본에서 5,000본으로 증가시킴에 따라 크게 증가하나 5,000본에서 6,500본으로 재식밀도 증가에 따른 채종량 증가는 크지 않았다. 4. 화분친의 웅수장과 웅수당 영화수는 1 : 2나 2 :4재배에 비하여 웅주간파 재배에서 작았고 재식밀도 증가에 따라 1 : 2 및 2 : 4재배에서는 크게 감소하였으나 2: 4재배에서는 유의하게 작아지지 않았다. 5. 변형단교잡종의 채종에는 1 : 2나 2 : 4재배의 10a당 종자친 5,000본 재식이 적합할 것으로 생각된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.870-871
• /
• 2009

• 한국한의학연구원논문집
• /
• 제18권3호
• /
• pp.87-93
• /
• 2012

Objectives : The present study is to verify whether the deformation of ear acupuncture needle tips that are currently on the market is caused during the process of initial packaging. Methods : Ear acupuncture needles distributed from three different companies were collected to measure the size of the groove on the transparent plate which is used in for the intial packaging. Then the tolerance range for off-centered tips, which represent the range of the groove size that is safe from damaging the needle tip, was determined based on the vertical length measured from tip to handle. 200 ear acupuncture needles were dipped in alcohol and scanned to confirm the position of the needles. Stereo-microscope was used to observe the needle tips that were located outside the tolerance range. Results : The increased number of ear acupuncture needle tips placed outside the tolerance range were seen from in the order of C company, A company and B company. The increased deformation of the needle tips caused by initial packaging was observed in the order of A company, C company and B company. Conclusion : Only the ear acupuncture needles from B company showed the strong correlation between needle tip deformation and initial packaging. It has been observed that the deformation of the ear acupuncture needles is mainly due to manufacturing process, not the packaging process.

• 한국초지조사료학회지
• /
• 제12권3호
• /
• pp.178-184
• /
• 1992

Five varieties of silage corn were cultivated to compare the growth characteristics and productivity. Corn varieties were Pioneer 3144(P 3144), 3160(P 3160), 3282(P 3282), 3352(P 3352) and Suweon 19 (S 19). The corns were seeded on May 2 and harvested on August 15, and measured the plant height, leaf length, leaf width, stem diameter, and yields of fresh and dry matter. The results obtained were as follows: 1. Plant height of P 3352 and P 3144 grown about 280cm throughout the experimental period was the tallest(P<.Ol), and those of P 3160, P 3282 and Suweon 19 ranged from 246.3 to 256.0 cm. 2. Leaf length is the longest in P 3352 and the shortest in P 3282(97.63cm vs 84.17cm), and there was significant(P<.Ol) difference between corn varieties. 3. Stem diameter was the longest in P 3144 and the shortest(P<.Ol) in P 3352(3.28cm vs 2.66cm). 4. P 3144, P 3282 and P 3352 had the greatest(P<.Ol) fresh matter yields per 10a in leaf, stem, and ear and whole plant, respectively. 5. Dry matter yield of P 3282 was the greatest(P<.Ol) in stem(1,080.6 kg/lOa) and leaf(304.5 kg/lOa), and that of P 3352 was the greatest in ear(864.1 kg/lOa) and whole plant yield(2,021 kg/lOa). 6. Ratios of respective part of corn to total dry matter were ranged from 12.7 to 17.8 76 for leaf, 44.5 to 66.9% for stem and husks, and 16.9 to 42.8 % for ear, and the highest in P 3160, P 3160 and P 3352, respectively. Consequently, P 3352, P 3144 and P 3282 shown high productivity in dry matter yield could be recommended as a reliable corn varieties for silage.

• 한국전산유체공학회지
• /
• 제20권3호
• /
• pp.62-69
• /
• 2015

Pressure change inside cabin as well as in tunnel has been calculated to assess the passenger pressure comfort of high-speed train. $C-STA^{TM}$, a CFD program based on axi-symmetric Navier-Stokes equation and Roe's FDS has been used to simulate the pressure change in tunnel during a high-speed train passing through it. To present the relative motion between the train and the tunnel, a modified patched grid scheme based on the structured grid system has been employed. The simulation program has been validated by comparing the simulation results with field measurements. Extensive parametric study has been conducted for various train speed, tunnel cross-sectional area and tunnel length to the pressure change in cabin. KTX-Sancheon(KTX2) high-speed train has been chosen for simulation and the train speed have been varied from 200 km/h to 375 km/h. The tunnel length has been varied from 300 m to 7.5 km and tunnel area from $50m^2$ to $120m^2$. Total 504 simulations have been conducted varying the parameters. Based on the database produced from the parametric simulations, minimum tunnel cross-sectional area has been surveyed for various train speeds based on Korean regulation on pressure change in cabin.

• 한국초지조사료학회지
• /
• 제8권1호
• /
• pp.47-54
• /
• 1988

The growth characteristics and yield per unit area of two cultivation systems of forage, corn (Zea mays L.) monoculture and corn-cowpea (Vigna sinesis King) inter-cropping were compared and obtained follow results. 1. The two cultivation systems were not significantly different in leaf length, leaf width and length of internode with harvesting time. 2. The weight of stalk and leaves of a plant were decreased with maturity, while weight of ear was markedly increased. The patterns of relative ratio of each components was essentially same in each cultivation system. In corn monocrop., the percentages of stalk, leaf and ear at final harvesting stage were 22.9, 13.7 and 63.4, respectively. 3. Dry matter yield per unit area (33kgIlOa) of intercropped corn at yellow stage was similar to that of monocropped corn ( l,482.8kg/ 10a vs 1 ,SO8.9kg/ 10a). At ripe stage, however, the DM yield of intercrop. was higher than that of monocrop. (1,810.4kg/lOa vs 1,660.4 kg/ 1 Oa). 4. The same pattern was observed in organic matter yield.

• 한국가스학회지
• /
• 제9권3호
• /
• pp.32-37
• /
• 2005

LP가스나 도시가스시설의 저압 호스 체결에서 견고함과 기밀성을 높이기 위해 호스밴드를 사용한다. 본 연구에서는 호스밴드의 성능 파악과 안전한 체결 거리의 제시를 위하여 호스밴드에 대한 내압강도와 당김력을 측정하였다. 호스밴드의 체결력은 스프링밴드 보다는 귀형밴드에서 높게 나타났으며 최적의 호스밴드 체결거리는 호스접속 끝단부로부터 1${\~}$2 mm일 때에 우수한 것으로 파악되었다.

• 한국초지조사료학회지
• /
• 제8권3호
• /
• pp.158-164
• /
• 1988

The growth characteristics and yield per unit area of two cropping systems, corn monoculture and 'wrnsoybean intercropping, were compared and the obtained results were as follows; 1.The two cultivation systems were not significantly different in leaf length, leaf width and length of internode at harvesting time. 2.The weight of stalk and the leaves of a plant were decreased with maturity, while the weight of ear was markedly increased. The patterns of relative ratio of each components were essentialy same in each cultivation systems. In corn monoculture, the percentages of stalk, leaf, and ear at final harvesting stage were 22.9, 13.7, and 63.4 and in corn-soybean intercropping, they were 21.8, 10.9, and 67.3 respectively. 3.Dry matter yield per unit area (kg/lOa) of intercropped corn at yellow stage was similar to that of monocultured corn (1, 483 kg/ 10a vs 1, 509 kg/ 10a). At ripe stage, however, the dry matter yield of intercropped plant was more than that of monocultured (1, 679 vs 1, 660 kg/ 10a). 4.The same pattern was observed in organic matter yield.

• 한국자원식물학회지
• /
• 제19권3호
• /
• pp.397-400
• /
• 2006

The objectives of this experiment was to evaluate the effect of seeding and transplanting date on yield and quality of rapeseed experiment were conducted in the research field of Chungcheongnam Do(Taejun) Agricultural Research and Extension Services with Yudal, one of the rapeseed cultivar of different growth characteristics among the six treatments were examined and recorded. Results showed that yield components such as plant height, length of ear and pod, number of branches and pods and percentage of pod setting and seed set were highest at the plot with direct seeding in Sep. 10. In this treatment yield of seed, 1,000 grains weight and weight of $1{\ell}$ were highest. On the basis of vegetative and yield parameter of direct seeding in Sep. 10 was the best sowing date of rapeseed crop in Chungcheongnam Do region of Korea. Experiments were conducted in the research field of Chungcheongnam Do(Taejun) Agricultural Research and Extension Services with Yudal variety, which showed different growth characteristics. Yield components such as plant height, length of ear and pod, number of branches and pods and percentage of pod setting and seed set were highest at the plot with direct seeding in Sep. 10. Yield of seed, 1,000 grains weight and weight of $1{\ell}$ were highest at the direct seeding in Sep. 10. Judging from the results reported above, seemed to be direct seeding in Sep. 10.

• 한국작물학회지
• /
• 제59권3호
• /
• pp.312-318
• /
• 2014

본 연구는 강원도농업기술원 옥수수연구소에서 종실옥수수 품종개발을 위하여 육성한 156개의 자식계통들에 대하여 총 14개의 질적 및 양적 형질들을 이용하여 형태적 변이연구를 수행하였다. 3개의 질적 형질들의 조사 결과에서 웅수색(QL1)과 자수색(QL2)은 황색을 나타내는 계통(85계통, 84계통)들이 가장 많았고, 초형(QL3)은 대부분의 계통(105 계통)이 반직립형을 나타내었다. 반면에 11개의 양적 형질들에 대한 조사 결과에서 출웅일수(QN1)는 평균 $66.7{\pm}4.2$ 일을, 출사일수(QN2)는 평균 $72.8{\pm}5.8$일을, 간경(QN3)은 $16.2{\pm}2.6mm$를, 간장(QN4)은 평균 $16.2{\pm}2.6mm$를, 착수고(QN5)는 평균 $84.3{\pm}17.3cm$를, 백립중(QN6)은 평균 $24.4{\pm}4.4g$을, 이삭장(QN7)은 평균 $47.0{\pm}17.9cm$를, 착립장(QN8)은 평균 $40.7{\pm}15.7cm$을, 이삭경(QN9)은 평균 $14.2{\pm}4.7cm$를, 종실중(QN10)은 평균 $175.6{\pm}97.6kg$을, 종자의 수분함량은 평균 $10.0{\pm}0.3%$를 각각 나타내었다. 이상의 결과에 의하면 분석에 이용된 자식계통들 중에서 11개의 자식계통(00hf3, 00hf19, 00hf30, 00hf36, 02S8069, 02S8072, 02S8090, 02S8099, 05S10011, 06S8085-6, 07S8011)들은 조사된 5개의 수량 관련 형질들 중에서 3~4개 이상의 형질들에서 비교적 높은 특성을 나타내었다. 한편 주성분 분석결과에서는 분석에 이용된 14개의 질적 및 양적 형질들 중에서 이삭장(QN7), 착립장(QN8), 이삭경(QN9), 종실중(QN10)은 제 1 주성분에서 양의 방향에 크게 기여하였고, 반면에 제 2 주성분에서는 출웅일수(QN1), 출사일수(QN2), 간장(QN4), 착수고(QN5)은 음의 방향에 크게 기여하였다. 따라서 본 연구에서 제 1축 및 제 2축의 주성분에서 양의 방향과 음의 방향에 크게 기여한 형질들은 본 연구에서 분석에 이용한 156개의 종실 옥수수 자식계통들을 식별하는데 유용한 형질들인 것으로 생각되었다. 본 연구에서 156개의 종실옥수수 자식계통들에 대한 형태적 변이 및 주성분 분석의 결과는 앞으로 강원도농업기술원 옥수수연구소에서 종실옥수수 품종개발을 위한 계통 육성 및 교배조합 구성 등에 유용한 정보를 제공할 것으로 기대한다.