• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.995-1007
• /
• 2018

Changes in the physicochemical properties of ready-to-feed liquid infant formula (LIF) stored at different temperatures (10, 20, 30, and $40^{\circ}C$) for 6 mon, focusing on 5-hydroxymethylfurfural (HMF) content, color, pH, fat globule size distribution, and rheological properties were determined. The HMF content increased with storage time, and LIF stored at $40^{\circ}C$ had a higher HMF content than that of LIF stored at $10^{\circ}C$. The lightness ($L^*$) decreased while redness ($a^*$) and yellowness ($b^*$) increased with increasing HMF content. The fat globule size and pH of LIF stored at $10^{\circ}C$ did not change. However, in the case of LIF stored at $30^{\circ}C$ and $40^{\circ}C$, the fat globule size increased and the pH decreased during storage for 6 mon. LIF stored at $40^{\circ}C$ had a higher apparent viscosity (${\eta}_{a,10}$) than that of LIF stored at $10^{\circ}C$, and the shear-thinning behavior of LIF stored at higher temperature was stronger than that of LIF stored at low temperature. The physicochemical changes of LIF during storage were accelerated by Maillard reaction (MR) at higher storage temperatures. Therefore, even if LIF is aseptically manufactured, we recommend that sterilized LIF should be stored at low temperature in order to minimize quality changes during storage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.5
• /
• pp.733-745
• /
• 2001

This review paper discusses the relevance and potential importance of food-feed systems in Asian agricultural systems, and in particular the role and contribution of legumes to these systems. A food-feed system is one that maintains, if not increases, the yield of food crops, sustains soil fertility, and provides dietary nutrients for animals. It involves a cropping pattern within which the feed crop has many beneficial effects without competing for land, soil nutrients and water with the food crops. The agricultural environment is described with reference to the priority agro-ecological zones and prevailing mixed farming systems in Asia. Within these systems, animal production is severely hampered by critical feed shortages which can however, be alleviated by the integration of suitable leguminous forages into the cropping systems. The review also focuses on the role and potential importance of leguminous forages in terms of biodiversity, their uses in farming systems, beneficial effects on animal performance, and draws attention to six case studies in different countries that clearly demonstrate many benefits of developing such food-feed systems. Considerable opportunities exist for widening the use of forage legumes in the development of systems with several complementary advantages (e.g. fenceline, cover crops, fodder banks, forage source and erosion control) to improve the development of sustainable crop-animal systems in Asia.

• Plant Journal
• /
• v.5 no.2
• /
• pp.62-67
• /
• 2009

The capability of design and engineering of global EPC companies has long been equalized through past similar construction experiences. Among various key factors in the success of EPC project, the capability of engineering is considered to be the most important factor since the engineering is preceding activities of EPC contract. The failure of engineering may adversely affect the subsequent procurement & construction activities and in turn may cause cost overrun or schedule delay. Therefore, an EPC company needs to continue to improve the engineering capabilities for the success of project. The engineering capabilities can be further improved if the EPC company should prevent recurrence of similar design faults that were previously committed. This study is intended to present how to make the most of the failure examples from previous projects towards a success of project. Failure is but a stepping stone to success. The EPC company can obtain useful lessons from the analysis of past failure examples.

• Journal of Ecology and Environment
• /
• v.38 no.2
• /
• pp.163-173
• /
• 2015

The occurrence of wild boars (Sus scrofa Linnaeus) and reports of wildlife-vehicle conflicts (i.e., road-kill) involving them have increased in natural forest regions of Korea. In the past few decades, many wildlife passages have been constructed to reduce vehicle collisions involving wildlife species. However, few studies have assessed the habitat suitability of target wildlife species when locating the construction sites of wildlife passages. Target species rarely use wildlife passages if built in an inappropriate location. Therefore, a quantitative habitat model is required to find suitable sites for wildlife passages that can connect the fragmented forest patches of wildlife habitats in Korea. In this study, the wild boar was selected as the target species, and six environmental variables (percentage of Quercus forest, slope aspect, distance to roads, water accessibility, forest stand age and density) were measured. The habitat model for wild boars was developed with a Delphi survey, and habitat suitability maps were delineated for the provinces of Gangwon-do and Jeollanam-do. In this study, 298 and 64 boars were observed in Gangwon-do and Jeollanam-do, respectively. Observations of wild boars derived from the second nationwide natural environmental survey were used to evaluate the habitat model. Habitat suitability maps that superimposed existing road networks suggested that wild boar habitats were severely fragmented in both provinces, particularly in Gangwon-do. To connect the fragmented habitats and prevent wildlife-vehicle collisions, this study proposes 11 and 5 wildlife passage sites in Gangwon-do and Jeollanam-do, respectively.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1320-1325
• /
• 2008

In the manufacture of automobile suspension modules at a company as parts supplier, the design process includes the detail design and the design modification via structural and fatigue durability analyses considering PoF(physics of failure) of their weldments that are repeated more than four times sequentially. The approval of the design and the release of final drawings follows. For the suspension modules, e.g. control arms and cross member, the man-hours per worker required in the process outlined above can reach as high as 1,414hours. Application of the developed integrated design system can reduce the man-hours of 1,004. In comparison with the conventional design process, this integrated design system reduces the required time by about 40%. If expense is taken into account, a savings of approximately $192,000 is estimated, assuming the design process accounts for 1.5% of total sales for the parts supplier

• Korean Journal of Microbiology
• /
• v.14 no.4
• /
• pp.176-185
• /
• 1976

An improved procedure for the rapid purification of glucose-6-phosphate dehydrogenase from extracts of Saccharomyces cerevisiae was developed by using affinity chromatography. Among six affinty media tested, NADP$^{+}$-agarose and Affi-gel Blue were more effective than others (i.e., Affi-gel Red, AMP-agarose, ATP-agarose, and NAD$^{+}$-agarose). Conditions to desorb the enzyme bound to the affinity media were examined to increase the purity as well as yield. The best result was obtained when the column was developed with a linear gradient of KCl (0-1.0M). In case of Affi-gel Blue, introduction of NAD$^{+}$ (15mM) washing step prior to the salt gradient was most effective to remove NAD$^{+}$-binding proteins. For a large scale preparation of G-6-P dehydrogenase higher recovery was obtained by Affi-gel Blue than NADP$^{+}$-agarose, however, the purity of the enzyme was decreased by 10 times if the former was used as the affinity medium. The capacity of Affi-gel Blue for G-6-P dehydrogenase was found to be 5 times higher than that of NADP$^{+}$-agarose. Furthermore Affi-gel Blue could be reused repeatedly and its preparation is relatively easier and less expensive than NADP$^{+}$-agarose.X> +/-agarose.

• Physical Therapy Korea
• /
• v.5 no.1
• /
• pp.63-78
• /
• 1998

The decrease of muscle power and muscle size between twenties and seventies was about 30% and 40% respectively. The loss of muscle mass by aging resulted in the decrease of muscle power. The loss of muscle mass was due to the decrease of number of Type I fiber and Type II fiber and size of each muscle fiber. The aging skeletal muscle didn't show the loss of glycolysis capacity but showed 20% decrease of the oxidative enzymes and muscle vascularization. The vigorous endurance exercise training with graded intensity played a role in the vascular proliferation, increase of activity of oxidative enzymes and improvement of $VO_2$ max. The graded resistance exercise also played a role in the muscle hypertrophy and increase of muscle power, if it performed with adequate intensity and period. The exercise adaptation of aging skeletal muscle prevented it from sarcopenia, provided the activity of daily living with great effect and provided the aging related disease, that is Type II diabetes mellitus, arteriosclerosis, hypertension, osteoporosis and obesity, with great effect.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 1998.11a
• /
• pp.34-36
• /
• 1998

In Korea, the initial installation of GIS requires lots of cost, time, and human efforts, If the accuracy of GIS data does not meet the certain standard for use, the system may not work as expected. So, it needs to be investigated for the accuracy of raw data. However, there is little study for the accuracy of raw data in Korea. Therefore, the purpose of this study is to review the data accuracy of raw data - geologic map, 1:5,000 and 1:25,000 scale topographic map, forest stand map, degree of green naturality(DGN) map, and detailed survey data of DGN map - for fulfilling the expected use in Korea. After this study, some errors in data were surveyed and following conclusions were derived. (1) There is a lack of data, e. g, wildlife habitat map. (2) Some data are misinterpreted depending on the location in the geologic map. (3) Some data are not updated after change of topography in the topographic map. (4) Some data are not edited properly in the forest stand map. (4) DGN classification system does not reflect the characteristic of Korean vegetation community. So, it needs to be refined and restructured.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.3
• /
• pp.260-268
• /
• 2005

This paper proposes an improved investment pnonty decision method of facilities considering the reliability of distribution networks. The proposed method decides an investment order of the facilities combining, by fuzzy rules, the investment priority decision by KEPCO and that by reliability evaluation indices. The reliability evaluation indices are SAIFI (System Average Interruption Frequency Index) and SAIDI (System Average Interruption Duration Index). The reliability analysis method of distribution networks applied in this paper utilizes the analytic method, where the used reliability data is the historical data of KEPCO. Particularly, we assumed that the failure rate increases as the equipment ages. To verify the performance of the proposed method, we applied it with the planned projects to reinforce the weak electrical facilities in KEPCO in 2004. The evaluation result showed that, under a limited budget, the reliability of KEPCO in the Busan region using the proposed method could be enhanced if used rather than the conventional method typically in place. Therefore, the results verify that the proposed method can be efficiently used in the actual priorities method for investing in the electrical facilities.

• Clinical and Experimental Reproductive Medicine
• /
• v.32 no.3
• /
• pp.223-230
• /
• 2005

Objective: This study was performed to evaluate the accuracy of hysterosalpingography (HSG) for evaluating female infertility patients by comparison with hysteroscopic and laparoscopic examination. Methods and Material: Total 219 infertile patients were retrospectively analyzed between January 1, 2002 and December 31, 2003. Ninety seven patients (44.3%) were primary infertility, 122 patients (55.7%) were secondary infertility. We performed hysteroscopic and laparoscopic examination on next cycle when HSG revealed any abnormal finding, and 3~6 cycles later if HSG was normal. Results: The accuracy of HSG was 65.2% compared with hysteroscopic examination (sensitivity 88.4%, specificity 46.4%, false positive rate 53.6%, false negative rate 11.6%). The most common abnormal finding of hysteroscopy was uterine synechia (67.4%) followed by endometrial polyp, uterine anomaly (e.g. uterine septum), endometrial hyperplasia. Compared with laparoscopic examination, the accuracy of HSG was 76.9% (sensitivity 98.9%, specificity 70.6%, +LR 3.36, -LR 0.02). The positive predictive value of normal patent tube was excellent (99.6%) but that of proximal tubal blockage was only 46.7%. The unilateral tubal obstruction of HSG was poor accuracy (+LR 3.85 -LR 0.68) and 70% of those was patent by laparoscopic examination. Laparoscopic examination also revealed that 53% of patients had peritubal adhesion and 37% of patients has additional pelvic findings, especially endometriosis. Among the patients had normal HSG, 53.5% patients with normal ultrasonography was diagnosed endometriosis (25.6% of them had endometriosis stage I-II). Conclusion: Normal HSG shows a high negative predictive value. Nevertheless, the incidence of associated pelvic disease in the normal HSG group is high enough to warrant diagnostic laparoscopy if nonsurgical treatment is unsuccessful. Because HSG has poor accuracy in predicting distal tubal blockage and peritubal adhesion, and poor positive predictive value of proximal tubal blockage, laparoscopic examination could be considered in abnormal HSG group.