• ETRI Journal
• /
• v.32 no.5
• /
• pp.713-721
• /
• 2010

E-textile technology has earned a great deal of interest in many fields; however, existing wearable network protocols are not optimized for use with conductive yarn. In this paper, some of the basic properties of conductive textiles and requirements on wearable personal area networks (PANs) are reviewed. Then, we present a wearable personal network (WPN), which is a four-layered wearable PAN using bus topology. We have designed the WPN to be a lightweight protocol to work with a variety of microcontrollers. The profile layer is provided to make the application development process easy. The data link layer exchanges frames in a master-slave manner in either the reliable or best-effort mode. The lower part of the data link layer and the physical layer of WPN are made of a fabric serial-bus interface which is capable of measuring bus signal properties and adapting to medium variation. After a formal verification of operation and performances of WPN, we implemented WPN communication modules (WCMs) on small flexible printed circuit boards. In order to demonstrate the behavior of our WPN on a textile, we designed a WPN tutorial shirt prototype using implemented WCMs and conductive yarn.

• Fashion & Textile Research Journal
• /
• v.11 no.4
• /
• pp.672-677
• /
• 2009

To reduce the dependence of wool dyeing on the temperature several solvents with different properties and structures were added to the dye bath of C. I. Acid Yellow 42. Nearly the same total solubility parameters(${\delta}_t$) of solvents as those of wool fiber and hydrophobic part of the dyestuff were needed to increase disaggregation of dye molecules, loosening the wool fiber and wickabilty of dyeing solution; besides, the large surface tension(${\gamma}$) value of the solvents and the well balanced values of the three-component Hansen solubility parameters such as dispersion(${\delta}_d$), polar(${\delta}_p$), and hydrogen(${\delta}_h$) bonding parameters were required. Among the added solvents dimethyl phthalate(DMP) and acetophenone(AP) were satisfied with these conditions and worked the most successfully in the low temperature wool dyeing. Their effectiveness proven by the dyeing rate and the activation energy ($E_a$) of the dyeing was in the order of DMP > AP > DBE > CH > M >NONE. In conclusion the total solubility parameters(${\delta}_t$), the three-component Hansen parameters and the surface tension(${\gamma}$) of DMP and AP could be the guidelines to select suitable solvents for low temperature wool dyeing.

• Composites Research
• /
• v.13 no.6
• /
• pp.63-72
• /
• 2000

In this paper, statistical treatments of effective properties for plain weave textile composites were presented. Configurations up to 32 layers with varied stacking phase shifts were considered. Effective properties were calculated by numerical simulation in which uni-axial tensile and shear load were applied at unit cell. Sample analysis was utilized to consider the inherent randomness in the phase shift and the results were treated statistically. It was found that effective properties were dependent on stacking phase shifts for thin plain weave textile composites. The distribution of $E_{xx}$ and $V_{xy}$ were skewed and the range of possible values was relatively large. As the number of layers increased, however, the distribution width became narrower and mean values converged. In contrast, $G_{xy}$ was not affected by phase shifts and thickness changes.

• Textile Coloration and Finishing
• /
• v.9 no.4
• /
• pp.39-46
• /
• 1997

In this study, Two types of polyester fabrics were hydrolysed with NaOH using the CDR m/c of pad-steam type and the Sofleena m/c of liquor-flow type to determine the alkali hydrolysis properties of polyester fabrics. The results were as follows: Under the same conditions, the weight loss of charmeuse was about 0.5% and 2~3% higher than that of pebble with CDR m/c and with Sofleena m/c, respectively. The weft density of pebble decreased about 14picks/inch with CDR m/c and 3picks/inch with Sofleena m/c comparing to the untreated sample at 18% of weight loss, while the weft density of charmeuse decreased about 5picks/inch with CDR m/c and 2picks/inch with Sofleena m/c at 20% of weight toss. K/S value decreased almost identically within about 11% weight loss of pebble and 8% of charmeuse processed with both CDR and Sofleena. However, in the above these weight losses, K/S value of the fabrics processed with Sofleena was higher than that of fabrics processed with CDR. The bending rigidity of warp direction of the fabrics ($2{\times}10^{-2}gf.cm^2 /cm$ higher for charmeuse and ($7{\times}10^{-3}gf.cm^2 /cm$ higher for pebble) processed with CDR m/c was higher than that of the fabrics processed with Sofleena m/c.

• Textile Coloration and Finishing
• /
• v.24 no.2
• /
• pp.113-120
• /
• 2012

Jacquard floor covering could be prepared from low-melting/regular sheath-core hybrid polyester, where the fiber is dyed in yarn state. With regard that the expected high shrinkage of the hybrid polyester in water makes problems in yarn dyeing, low-temperature dyeing properties of the hybrid polyester were studied. The rate of shrinkage of low-melting hybrid polyester exceeds 9% in hot water above $90^{\circ}C$, at such condition, cheese yarn dyeing is very difficult. Although disperse dyes exhaust in a relatively high speed on low-melting hybrid polyester, diffusion of these dyes to the core regular polyester was extremely slow under $90^{\circ}C$. Foron Blue E-BL 150, an anthraquinone E-type disperse dye, showed appreciable diffusion after 48hrs dyeing at $90^{\circ}C$. The fastness to rubbing and drycleaning were improved by one grade after reduction cleaning.

• Journal of Fashion Business
• /
• v.16 no.2
• /
• pp.138-150
• /
• 2012

Nano Inkjet DTP technology, a new technology introduced recently, can be applied to various types of fabric, and pre-treatment process can be omitted, which makes the whole printing process compact. Some important factors for DTP are color difference between the color selected by the designer on PC and the color on the final product and durability of the final fabrics. In this study, the twenty-three trend colors of 2012-2013 F/W suggested by PeclersParis have been picked to be printed on cotton, silk and polyester fabrics, then K/S and ${\Delta}E$ value and color fastness were measured. The results show that dyeability of fabric is varied for each color group, and that also tone of color affect to dyeability when measured for colors in the same group. In general, for all fabric, light fastness, washing fastness and color fastness to sublimation are outstanding. However, because of poor rubbing fastness, additional treatment to fix colorant on fabric is required.

• Fashion & Textile Research Journal
• /
• v.15 no.4
• /
• pp.533-542
• /
• 2013

Fashion products are frequently purchased on impulse and are also one of the most popular product categories sold online. Online environment attributes can facilitate flow experiences that are described as an optimal psychological state reached during an engagement in activities (e.g., games and e-shopping). This study estimated the path model to examine the causal relationships among shopping mall attributes, flow, e-impulse buying, and consumer satisfaction for fashion products. A total of 598 usable questionnaires were obtained from college students who had purchased fashion products through the Internet. Data were analyzed by exploratory factor analysis, confirmatory factor analysis, and path analysis using SPSS 18.0 and AMOS 18.0. The results showed that e-shopping mall attributes (visual attributes and product attributes) significantly influenced e-impulse buying (fashion-oriented impulse buying and promotion-oriented impulse buying) which was mediated by the consumer flow experience and then influenced by consumer satisfaction. In the path model, the flow was stimulated by shopping mall attributes, the e-impulse buying was influenced by flow, and the consumer satisfaction was influenced by e-impulse buying. Flow was the most highly related to the fashion-oriented impulse buying, and followed by the relationship of the flow and promotion-oriented impulse buying in the context of e-shopping for fashion products. A managerial implication was discussed for fashion product e-retailers to develop strategies on visual attributes and product attributes that could stimulate and increase the consumer flow to trigger impulse buying as well as consumer satisfaction.

• Proceedings of the Korean Fiber Society Conference
• /
• 1993.06b
• /
• pp.413-417
• /
• 1993

A study has been conducted on the mechanical properties of two sort of woven silk fabrics, i.e. habutae and dechine, with KES-류 handle measurement system. The mechanical properties are compared with their structural parameters, such as fabric densities, thickness

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.361-363
• /
• 2001

Aromatic pelybenzoxazoles(PBOs) display excellent thermal stability plus good solvent and chemical resistance. Wholly aromatic PBOs, in fact, are soluble only in strong acids(e.g., sulfuric, rmethanesulfonic, triflic, and polyphosphoric acids). However, fully heterocyclized polymers have shown some drawbacks in solubility and processing. This problem of processing is currently being exploited to obtain unusual combinations of physical properties in fibers and films. (omitted)

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.844-852
• /
• 2020

This study is to understand the preferences of pilots, flight engineers and crew who work in the same aircraft but are exposed to different working environments and perform different mission operations in order to develop an ergonomic flight jacket. Based on a preliminary investigation, a survey of 107 pilots and 36 flight engineers and crew was conducted. The results are as follows; Pilots can control the temperature inside the cockpit, so they are less exposed to the cold when working, while flight engineers and crew are exposed to the cold more because they have many external tasks. The reason for the problem of the current flight jacket was a difference in ranking between two groups, but the highest ranking was poor dimensional suitability due to the habit of wearing layers of clothing. As a result of preferred design, there were significant differences between groups in the item of overall style. Pilots preferred a bomber jacket style(P:68.2%, E&C:44.4%), on the other hand, flight engineers and crew preferred a field jacket style(P:26.2%, E&C:55.6%)(p<.01). They preferred a stand collar(P:71.0%, E&C:86.1%), a fastener slider for a front fastening(P:62.6%, E&C:61.1%), fastener tape cuffs(P:54.2%, E&C:47.2%), a jacket with a softshell(P:86.9%, E&C:83.3%), fleece as softshell material(P:88.8%, E&C:69.4%), and fastener sliders as a attaching method(P:69.2%, E&C:61.1%). A hem fastening will be selected differently according to the overall style of outshell. Additionally, they preferred more than 5ea pockets(P:51.4%, E&C:44.4%), fastener sliders as pocket's fastenings(P:48.6%, E&C:61.1%), armpit ventilations(P:62.9%, E&C:58.5%). The results of above will be considered to design an ergonomic flight jacket.