• 패션비즈니스
• /
• 제16권2호
• /
• pp.138-150
• /
• 2012

Nano Inkjet DTP technology, a new technology introduced recently, can be applied to various types of fabric, and pre-treatment process can be omitted, which makes the whole printing process compact. Some important factors for DTP are color difference between the color selected by the designer on PC and the color on the final product and durability of the final fabrics. In this study, the twenty-three trend colors of 2012-2013 F/W suggested by PeclersParis have been picked to be printed on cotton, silk and polyester fabrics, then K/S and ${\Delta}E$ value and color fastness were measured. The results show that dyeability of fabric is varied for each color group, and that also tone of color affect to dyeability when measured for colors in the same group. In general, for all fabric, light fastness, washing fastness and color fastness to sublimation are outstanding. However, because of poor rubbing fastness, additional treatment to fix colorant on fabric is required.

• Journal of Microbiology and Biotechnology
• /
• 제16권1호
• /
• pp.141-144
• /
• 2006

An antibody layer was fabricated to detect Escherichia coli O157:H7. The micropattern of 16-mercaptohexadecanoic acid (16-MHDA) as alkylthiolate was formed on the gold surface by using the PDMS stamp with microcontact printing $({\mu}CP)$ techniques. In order to form antibody patterns on the template, protein G was chemically bound to the 16-MHDA patterns, and antibody was adsorbed on a self-assembled protein G layer. The formation of the 16-MHDA micropattern, self-assembled protein G layer and antibody pattern on Au substrate was confirmed by surface plasmon resonance (SPR) spectroscopy. Finally, the micropatterning method was applied to fabricate the antibody probe for detection of E. coli O157:H7, and monitoring of antigen by using this probe was successfully achieved.

• 펄프종이기술
• /
• 제38권1호통권113호
• /
• pp.27-33
• /
• 2006

Newsprint is quantitatively the most important printing paper. The demands for its printability are continuously increasing. It is well known that the relationship between the physically tested paper properties and newspaper printability is unsatisfactory. In order to improve the printing quality of Korean newsprint, the printability coefficients such as maximum ink requirement(Ymax), print through were investigated. Kinds of newspapers and black printing ink were tested by IGT printability tester. Experiment condition of IGT printability tester was 14 steps between $0.2{\sim}2.8g/m^2$ of ink requirement, printing pressure was 200 N and printing velocity was 1 m/sec. The properties of newspaper samples (basis weight, bulk density, roughness, smoothness, porosity, i. e.) were examined in accordance with KS and TAPPI standard testing methods. The result of this study are respected for usefulness printing quality management of Korean newsprint.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.894-898
• /
• 2009

In a post printing section of roll to roll printing systems, scratch problem is the major defects. The functional qualities such as conductivity, mobility could deteriorate because of the scratch defect. In general, the scratch of the printed pattern on the flexible substrate was induced from a contact between rolls and printed pattern in the post printing section. In this paper, for non-contacting transfer of a moving web, a mathematical tension model has been developed considering strain due to air floatation and the proposed mode has been validated by numerical simulation. Additionally, the correlation between floatation height and speed compensation to control the tension and register are investigated. On the basis of the proposed model, a guide line of speed control in R2R printing system is presented to guarantee the non-contact between rolls and R2R printed pattern on the flexible substrate.

• 전기화학회지
• /
• 제3권4호
• /
• pp.235-240
• /
• 2000

고출력 전기화학 캐패시터를 위한 전극제조공정으로 screen printing과 doctor blade법이 연구되었다. Screen printing에 의해서 제작된 비정질 $MnO_2$전극으로 측정된 CV (cyclic voltammogram)는 이상적인 캐패시터에 가까운 특성을 보여주었다. 50mV/s의 scan rate에서의 CV로부터 계산된 비용량은 $140{\mu}m,\;24{\mu}m,\; 3{\mu}m$의 전극두께에 대해서 각각 5.8F/g과, 81.8F/g, 172.0F/g의 값을 나타내었다. Screen printing전극에서의 $MnO_2$활물질의 이용율을 $100\%$로 하였을 때, paste와 doctor blade법의 이용율은 각각 $3.4\%$와 $47.6\%$이었다. Screen printing은 고출력 응용을 위한 얇은 전극의 코팅 방법으로 우수한 특성을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.731-736
• /
• 2014

An organic junction transistor with a vertical structure based on an active layer of poly(3-hexylthiophene) was fabricated by facile micro-contact printing combined with the Langmuir-Schaefer technique, without conventional e-beam or photo-lithography. Direct printing and subsequent annealing of Au-nanoparticles provided control over the thickness of the Au electrode and hence control of the electrical contact between the Au electrode and the active layer, ohmic or Schottky. The junction showed similar current-voltage characteristics to an NPN-type transistor. Current through the emitter was simply controllable by the base voltage and a high transconductance of ~0.2 mS was obtained. This novel fabrication method can be applied to amplifying or fast switching organic devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1071-1074
• /
• 2008

By carefully selecting the structure of dyes, especially the metal complex dyes, and studying the properties of the prototype display. It was found some dyes electrophoresis and display well. The dyes ink with good stability during electrophoresis when the electrode was protected. while the response time is about 300 ms.

• 한국CDE학회논문집
• /
• 제21권3호
• /
• pp.306-312
• /
• 2016

In general, the shape of a 3D printed object is not to be changed after the generation. Most changes, for example, contraction of a molten polymer after cooling is thought to be undesirable. 4D printing however tries to make benefit of a shape change after the part is generated. The shape change is required to be controllable in response to an external stimuli. These artifacts from 4D printing are called kinetic components which are defined as structures formed by combining inert materials and smart materials that change under certain stimuli. We propose a design software that can systematically calculate inert links with smart joints to follow the shape of the target design.

• 한국HCI학회논문지
• /
• 제11권1호
• /
• pp.47-55
• /
• 2016

삼차원 프린팅(이하 3D프린팅)은 현대인들에게 새로움과 흥미를 줄 뿐 아니라 새로운 산업혁명을 예고할 정도로 각광받는 기술이다. 또한 다양한 3D프린팅 서비스 플랫폼의 출현으로 개인들도 3D프린팅으로 디자인한 제품을 쉽게 소유할 수 있게 되었다. 그러나 3D프린팅이 대중화되는 시대, 3D프린팅으로 누구나 원하는 제품을 디자인해서 만들 수 있는 신제조시대가 오기까지는 아직 고려할 문제들이 많아 보인다. 예를 들어, 과연 현존하는 3D프린팅 서비스들이 기존에 기계나 사람이 제작하던 제품을 3D프린팅으로도 만들 수 있다는 것 이상을 보여줄 수 있는지, 현존하는 대다수의 3D프린팅 서비스 플랫폼들처럼 넓은 범위의 제품군을 판매하는 것이 소비자들에게 어떤 의미를 제공할 것인지 등에 대한 충분한 고려와 연구가 필요하다. 이런 맥락에서 시작한 본 연구는 소비자들로 하여금 제품군의 범위가 넓은 3D프린팅 온라인 서비스 플랫폼과 상대적으로 좁은 서비스를 직접 경험해보게 한 후, 구매희망 사이트, 디자인의 다양성, 디자인 만족도, 지각된 기술력, 지각된 구매만족, 지각된 애프터서비스(A/S)를 비교하고 선택형 질문과 서술형 질문에 응답하게 함으로써 향후 3D프린팅 서비스가 나아가야할 방향이 무엇인지에 대한 통찰을 얻고자 했다. 결과적으로 제품군의 범위가 넓은 서비스(예: Shapeways)에 대한 소비자들의 선호가 좁은 서비스(예: Digital Forming)에 대한 선호보다 전반적으로 강함을 관찰하였고, 디자인의 다양성과 원하는 디자인의 구현 가능성이 3D프린팅 서비스가 고려해야할 가장 중요한 요소임을 확인할 수 있었다. 더하여 향후 경쟁력 있는 3D프린팅 서비스가 되기 위해 다양한 분야의 디자이너풀을 확보를 통한 디자인 컨설팅을 진행, 초보자들도 쉽게 디자인할 수 있는 웹기반 소프트웨어 제공, 온-오프라인 매장 병행운영에 대해 논의하였다.

• 한국염색가공학회지
• /
• 제23권1호
• /
• pp.35-42
• /
• 2011

For high quality DTP products, it is important to optimize the parameters of media, pre- and after-treatment, ink, printer, etc. This study investigated the effect of types of fabrics(media) as a DTP parameters. Especially, the effects of media properties such as yarn twist and knitted fabric structure, on printability and color difference were examined. Two types of cotton yarn twist(830 and 1630 twist/meter) and five knitted structures of media were prepared with a single circular knitting machine. The K/S values of hard-twist samples were higher than those of normal-twist samples in every media structures. It is more effective to use the knitted fabrics of a hard-twist yarn to obtain dark color in the printing above input level value 60 where the printability improvement was most pronounced in case of plain structure. Among the five media structures a plain structure was the highest and that of corduroy was the lowest in terms of K/S values. Also ${\Delta}E$ values and lightness of the hard-twist yarn samples were smaller than that of normal-twist yarn samples when ${\Delta}E$ values were tested by using a standard of a normal twist yarn sample with a plain structure, which was increased in the case of corduroy structure.