• 한국축산식품학회지
• /
• 제39권1호
• /
• pp.23-34
• /
• 2019

Fat reduction in the formulation of cheese emulsion causes problems in its flowability and functional characteristics during spray-dried cheese powder production. In order to eliminate these problems, the potential of using microparticulated whey protein (MWP) in cheese emulsions was examined in this study. Reduced-fat white-brined cheese emulsions (RF) with different dry-matters (DM) (15%, 20%, and 25% excluding emulsifying salt) were produced using various MWP concentrations (0%-20% based on cheese DM of emulsion). Their key characteristics were compared to full-fat cheese emulsion (FF). MWP addition had no influence on prevention of the phase separation observed in the instable group (RF 15). The most notable effect of using MWP was a reduction in apparent viscosity of RF which significantly increased by fat reduction. Moreover, increasing the amount of MWP led to a decrease in the values of consistency index and an increase in the values of flow behavior index. On the other hand, using high amounts of MWP made the emulsion more liquid-like compared to full-fat counterpart. MWP utilization also resulted in similar lightness and yellowness parameters in RF as their full-fat counterparts. MWP in RF increased glossiness and flowability scores, while decreased mouth coating scores in sensory analyses. Fat reduction caused a more compact network, while a porous structure similar to FF was observed with MWP addition to RF. In conclusion, MWP showed a good potential for formulation of reduced-fat cheese emulsions with rheological and sensorial characteristics suitable to be used as the feeding liquid in the spray drying process.

• Tribology and Lubricants
• /
• 제37권5호
• /
• pp.189-194
• /
• 2021

A straightforward, yet effective surface modification method of stainless steel mesh and its interesting anti-wetting characteristics are reported in this study. The stainless steel mesh is electrochemically etched, and the specimen has both micro and nano-scale structures on its surface. This process transforms the two types of mesh specimens known as the regular and dense specimens into hydrophobic specimens without applying any hydrophobic chemical coating process. The fundamental wettability of the modified mesh is analyzed through a dedicatedly designed experiment to investigate the waterproof characteristics, for instance, the penetration threshold. The waterproof characteristics are evaluated in a manner that the modified mesh resists as high as approximately 2.7 times the pressure compared with the bare mesh, i.e., the non-modified mesh. The results show that the penetration threshold depends primarily on the advancing contact angles, and the penetration stop behaviors are affected by the contact angle hysteresis on the surfaces. The findings further confirm that the inexpensive waterproof meshes created using the proposed straightforward electrochemical etching process are effective and can be adapted along with appropriate designs for various practical applications, such as underwater devices, passive valves, and transducers. In general, , additional chemical coatings are applied using hydrophobic materials on the surfaces for the applications that require water-repelling capabilities. Although these chemical coatings can often cause aging, the process proposed in this study is not only cost-effective, but also durable implying that it does not lose its waterproof properties over time.

• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.402-408
• /
• 2013

PURPOSE. The aim of this study was to evaluate the surface properties and in vitro bioactivity to osteoblasts of magnesium and magnesium-hydroxyapatite coated titanium. MATERIALS AND METHODS. Themagnesium (Mg) and magnesium-hydroxyapatite (Mg-HA) coatings on titanium (Ti) substrates were prepared by radio frequency (RF) and direct current (DC) magnetron sputtering.The samples were divided into non-coated smooth Ti (Ti-S group), Mg coatinggroup (Ti-Mg group), and Mg-HA coating group (Ti-MgHA group).The surface properties were evaluated using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The surface roughness was evaluated by atomic force microscopy (AFM). Cell adhesion, cell proliferation and alkaline phosphatase (ALP) activity were evaluated using MC3T3-E1 cells. Reverse transcription polymerase chain reaction (RT-PCR) analysis was performed. RESULTS. Cross-sectional SEM images showed that Mg and Mg-HA depositionson titanium substrates were performed successfully. The surface roughness appeared to be similaramong the three groups. Ti-MgHA and Ti-Mg group had improved cellular responses with regard to the proliferation, alkaline phosphatase (ALP) activity, and bone-associated markers, such as bone sialoprotein (BSP) and osteocalcin (OCN) mRNA compared to those of Ti-S group. However, the differences between Ti-Mg group and Ti-MgHA group were not significant, in spite of the tendency of higher proliferation, ALP activity and BSP expression in Ti-MgHA group. CONCLUSION. Mg and Mg-HAcoatings could stimulate the differentiation into osteoblastic MC3T3-E1 cells, potentially contributing to rapid osseointegration.

• 한국표면공학회지
• /
• 제47권1호
• /
• pp.39-47
• /
• 2014

The peculiar feature of cathodic protection in seawater has the capability to form mineral calcareous deposits such as magnesium and calcium on metal surfaces. It is assumed that $OH^-$ ions are generated close to the metal surface as a result of cathodic protection and generated $OH^-$ ions increases the pH of the metal/seawater interface outlined as the following formulae. (1) $O_2+2H_2O+4e{\rightarrow}4OH^-$, or (2) $2H_2O+2e{\rightarrow}H_2+2OH^-$. And high pH causes precipitation of $Mg(OH)_2$ and $CaCO_3$ in accordance with the following formulae. (1) $Mg^{2+}+2OH^-{\rightarrow}Mg(OH)_2$, (2) $Ca^{2+}+CO{_3}^{2-}{\rightarrow}CaCO_3$. The focus of this study was to increase the amount of $CO{_3}^{2-}$ with the injection of $CO_2$ gas to the solution for accelerating process of the following formulae. (1) $H_2O+CO_2{\rightarrow}H_2CO_3$, (2) $HCO^{3-}{\rightarrow}{H^+}+CO{_3}^{2-}$. Electrodeposit films were formed by an electro-deposition technique on steel substrates in solutions of both natural seawater and natural seawater dissolved $CO_2$ gas with different current densities, over different time periods. The contents of films were investigated by scanning electron microscopy(SEM) and X-ray diffraction(XRD). The adhesion and corrosion resistance of the coating films were evaluated by anodic polarization. From an experimental result, only $CaCO_3$ were found in solution where injected $CO_2$ gas regardless of current density. In case of injecting the $CO_2$ gas, weight gain of electrodeposits films hugely increased and it had appropriate physical properties.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.78-94
• /
• 2005

Purpose. The purpose of this study was to compare the effects of various surface treatments by measuring resonance frequency and histomorphometric analyses. Material and methods. In 5 adult dogs, the mandibular premolar were extracted. Six months later, 30 screw titanium implants (Dentium Co., Seoul, Korea) 6mm in length and 3.4mm in diameter, were placed in the mandibles of 5 dogs. Implants were divided into five groups following to surface treatment methods ; Group 1 is machined controls, Group 2 is sandblasted with large grit and acid-etched (SLA), Group 3 is anodized (Autoelectric Co., Korea, 660Hz, Duty10), Group 4 is hydroxyapatite(HA) coated by ion beam assisted deposition(E-beam), Group 5 is hydroxyapatite(HA) coated with Sol-gel coating process. Resonance frequency was measured implant placement immediately, and 3, 6 weeks and 10 weeks of healing perods. With the animal subject's sacrifice 10 weeks after implantation, implants were removed on bloc and histologic and computer-based histomorphometric analyses were performed. Histomorphometric analysis involved quantification of the entire bone to metal contact around the implants. Statistical analyses were performed using the SPSS for Windows (ver. 9.0 SPSS Inc.) Statistical differences were considered significant at P<0.05. Results. The results were as follows : 1) In five groups, mean value of resonance frequency analysis(RFA) were highest in group 5 (Sol-gel implant) at implantation and those of group 4 (E-beam)was highest at 10 weeks . but there was no correlation between surface treatments and RFA. 2) In all surface treatment groups, the RFA values of implants decreased until 3 weeks and increased to 10 weeks. 3) The percentage of direct bone-to-implant contact (BIC) had statistical significance between five groups in cancellous bone, (P<0.05) the percentage of bone density inside the thread had no statistical significance between five groups. (P>0.05) 4) There was a significant difference between cortical bone and cancellous bone in BIC. (P<0.05) and bone density. (P<0.05) 5) There was a correlation between the RFA value of implants at 10 weeks and BIC in cancellous bone, and between the RFA value of implants at 10 weeks and bone density in cortical bone. (P<0.05). Conclusions. These results indicate that surface treatment does not affect the implant stability in case of good bone quality.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.421-427
• /
• 2009

We successfully fabricated 4.7-inch organic thin film transistors array with $640{\times}480$ pixels on flexible substrate. All the processes were done by photolithography, spin coating and ink-jet printing. The OTFT-Electrophoretic (EP) pixel structure, based on a top gate OTFT, was fabricated. The mobility, ON/OFF ratio, subthreshold swing and threshold voltage of OTFT on flexible substrate are: 0.01 ^2/V-s, 1.3 V/dec, 10E5 and -3.5 V. After laminated the EP media on OTFT array, a panel of 4.7-inch $640{\times}480$ OTFT-EPD was fabricated. All of process temperature in OTFT-EPD is lower than $150^{\circ}C$. The pixel size in our panel is $150{\mu}m{\times}150{\mu}m$, and the aperture ratio is 50 %. The OTFT channel length and width is 20 um and 200um, respectively. We also used OTFT to drive EP media successfully. The operation voltages that are used on the gate bias are -30 V during the row data selection and the gate bias are 0 V during the row data hold time. The data voltages that are used on the source bias are -20 V, 0 V, and 20 V during display media operation.

• 폴리머
• /
• 제33권4호
• /
• pp.347-352
• /
• 2009

전자종이 등 전기영동을 이용한 디스플레이 기술에 사용하기 위한 대전 입자를 유무기 복합 형태로 제조하였다. $TiO_3$와 $Co_3O_4$를 core 입자로 사용하여 Poly(methyl methacrylate)를 분산 중합으로 코팅하였다. 또한, 코팅 고분자에 charge moiety를 부여하여 $TiO_2$ core 입자는 양전하의 복합입자로 $Co_3O_4$ core 입자는 음전하의 복합입자로 제조하였다. 제조된 대전입자는 중합 후 구형의 형태를 갖게 되었음을 전자현미경을 통하여 확인을 하였다. 대전 복합입자를 전기영동에 사용하기 위하여 전기영동 유체와 유사한 밀도를 갖도록 조절하였다. $TiO_2$ 입자의 밀도는 고분자 코팅 전후 4.02 g/$cm^3$에서 1.44 g/$cm^3$로 변화하였고, $Co_3O_4$ 입자의 경우 입자의 밀도가 6.11 g/$cm^3$에서 1.49 g/$cm^3$로 변화하였다. Urea, melamine, formaldehyde를 벽물질로 하여 흑백 입자를 각각 포함하는 microcapsule을 in-situ polymerization 방법으로 제조하였으며, 균일한 크기와 투명한 microcapsule이 제조되었음을 video 현미경을 통하여 확인하였다.

• Applied Biological Chemistry
• /
• 제11권
• /
• pp.77-82
• /
• 1969

1968년 10월 3일에 채취한 홍옥(紅玉)을 시료로 하여 12월 3일 까지 감압도에 따라 저장시험한 결과를 보면 1) 본(本) 시험에서 실험한 감압도에 따른 시험결과는 10cmHg의 저감압이 가장 효과적이었다. 2) 상온의 10cmHg 감압구 (No.2)가 냉장상압(No.5) 보다 우수하였다. 3) 감압저장에 Poly-ethylene film 포장의 겸용은 단기 저장에서는 보다 효과적이었으나 장기 저장에서는 생리장해로 인하여 폐과량 증가하였다. 4) 청과물의 선도(鮮度), 보지제, 증산억제제 및 위조방지제인 O.E.D. coating이 저장효과에 미치는 영향은 극히 미약하였다. 5) Sodium dehydro acetate의 처리는 홍옥의 저장에서는 아무런 효과가 없었다. 6) 전당 및 환원당은 전보(前報) 축(祝)의 저장시험 때와 같이 저장 초기에는 증가하고 일정기간 후는 다 같이 감소하였으며 10cmHg 감압구(No.6)에서 증가 및 감소율이 가장 낮았다. 7) 산 및 Vitamin 도 전보(前報)와 같은 경향이었으며 역시 저감압인 10cmHg 감압구(No.6)에서 감소율이 현저히 낮았다. 지금 까지의 실험 결과로 미루어 볼 때 사과의 저장에는 10cmHg로 감압저장하는 것이 가장 효과적이며 냉장감압 함이 더욱 좋다고 할수 있겠다.

• 한국지반공학회논문집
• /
• 제24권1호
• /
• pp.91-99
• /
• 2008

본 연구에서는 대형 챔버에 낙사법에 의한 고결시료 조성시 모래와 고결유발제인 석고의 재료분리를 방지하기 위한 방법을 검토하고, 콘관입시험, 딜라토미터 시험, 벤더엘리먼트 시험을 수행하여 조성된 시료의 균질성을 평가하였다. 시료 낙사시 발생하는 재료분리를 최소화하기 위해 모래 중량비 0.5%의 물로 모래시료 표면을 습윤시키고, 석고를 모래표면에 골고루 흡착시킨 후 시료를 낙사하였다. 일반적인 세립분 포함 모래시료와 같이 건조상태 모래와 석고의 혼합시료는 석고함유율이 증가할수록 최대/최소 간극비가 감소하였지만, 습윤상태 모래와 석고의 혼합시료는 석고함유율이 적은 초기의 최대/최소 간극비가 증가하는 경향을 보였다. 조성된 시료의 연직방향 론선단저항, 딜라토미터 수평응력지수, 딜라토미터 계수, 재료지수, 그리고 수평방향 전단파속도는 매우 균등하게 측정되었으며, 이로써 시료의 균질성이 매우 양호한 것으로 평가된다.

• Restorative Dentistry and Endodontics
• /
• 제31권2호
• /
• pp.103-112
• /
• 2006

본 실험에서는 자가부식형 접착제와 콤포짓트 레진 사이의 산도의 차이를 완화시킬 수 있는 접착레진을 자가부식형 접착제 위에 추가적으로 도포할 경우, 상아질에 대한 접착력을 개선할 수 있는지를 연구하였다. 자가부식형 접착제로는 실험실에서 직접 제작한 실험용 자가부식형 접착제 (pH: 1.96)와 Adper Prompt (3M ESPE, VSA, pH: 1.0)를 사용하였으며, 중성의 접착레진으로 All-Bond 2의 D/E bonding resin (Bisco Inc., USA, pH: 6.9)을 사용하였다. 두 대조군에서는 두 가지 자가부식형 접착제를 각각 두번씩 도포하였으며, 두 실험군에서는 각 자가부식형 접착제를 한번 도포한 후 그 위에 D/E bonding resin을 추가 도포하였다. Z-250 하이브리드 복합레진을 쌓아올려 모레시계 형태의 시편을 제작하여 미세인장강도를 측정하고 t-test를 이용하여 비교하였다. 파절 양상은 입체현미경과 주사전자현미경을 이용하여 관찰하였다. D/E bonding resin을 추가 도포한 미세 인장접착강도는 유의하게 증가되었고, 접착층과 복합레진 또는 접착층과 상아질 사이의 파절을 보인 시편의 수는 감소하고, 접착층 내의 파절을 보인 시편의 수는 증가되었다. 따라서 자가부식형 접착제와 복합레진의 산도의 차이를 완화할 수 있는 중성의 접착레진을 추가 도포할 경우 미세인장접착강도를 증가시킬 수 있음을 확인하였다.