• Safety and Health at Work
• /
• v.8 no.3
• /
• pp.237-245
• /
• 2017

Background: Solar furnaces are used worldwide to conduct experiments to demonstrate the feasibility of solar-chemical processes with the aid of concentrated sunlight, or to qualify high temperature-resistant components. In recent years, high-flux solar simulators (HFSSs) based on short-arc xenon lamps are more frequently used. The emitted spectrum is very similar to natural sunlight but with dangerous portions of ultraviolet light as well. Due to special benefits of solar simulators the increase of construction activity for HFSS can be observed worldwide. Hence, it is quite important to protect employees against serious injuries caused by ultraviolet radiation (UVR) in a range of 100 nm to 400 nm. Methods: The UV measurements were made at the German Aerospace Center (DLR), Cologne and Paul-Scherrer-Institute (PSI), Switzerland, during normal operations of the HFSS, with a high-precision UV-A/B radiometer using different experiment setups at different power levels. Thus, the measurement results represent UV emissions which are typical when operating a HFSS. Therefore, the biological effects on people exposed to UVR was investigated systematically to identify the existing hazard potential. Results: It should be noted that the permissible workplace exposure limits for UV emissions significantly exceeded after a few seconds. One critical value was strongly exceeded by a factor of 770. Conclusion: The prevention of emissions must first and foremost be carried out by structural measures. Furthermore, unambiguous protocols have to be defined and compliance must be monitored. For short-term activities in the hazard area, measures for the protection of eyes and skin must be taken.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.187-195
• /
• 2015

In this paper, we examined the effect of positive affect and negative affect on the life satisfaction in the workplace. Also, this study focused on an empirical test of the role of work self-efficacy and work meaningfulness in the subjective well-being of office worker. To achieve this purpose, we suggested a research model consisting of factors such as work self-efficacy, work meaningfulness, positive affect, negative affect, life satisfaction. Data was collected using the survey method, and analyzed using structural equation model. According to PLS analysis, first, lower negative affect was associated with higher life satisfaction. Secondly, work meaningfulness was a very important predictor for the subjective well-being of office worker.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.148-155
• /
• 2013

Objectives: This study was performed in order to compare the average levels and similarity of occupational exposure limits in South Korea, the U.S., the E.U., Germany, Japan and Finland. Methods: In this study, occupational exposure limits (OELs) for one hundred and seventy seven hazardous substances which are managed in the workplace by the Occupational Safety and Health Act in South Korea were matched with those of other countries. The units for the exposure limits of the same substance (identical CAS number) were unified and the exposure limits in each country were compared with threshold limit values (TLVs) of the American Conference of Governmental Industrial Hygienists (ACGIH) using a geometric mean method. Geometric similarity was calculated to assess the association by each country. Results: The exposure limits according to ACGIH TLVs in South Korea, the E.U., Germany, Japan, and Finland were 148, 37, 76, 90, and 110, respectively. When using TLVs of ACGIH as a standard, the geometric mean ratios of Germany, Finland, the E.U., South Korea, and Japan were 0.79, 0.80, 0.82, 1.19, and 1.27, respectively. Geometric similarity with TLVs of ACGIH was highest in South Korea (0.75) followed by Japan (0.56), the E.U. (0.52), Finland (0.50), and Germany (0.46). Conclusions: Through the comparison of levels of OELs and similarities among South Korea, the U.S., the E.U., Germany, Japan, and Finland, we could better understand the characteristics of occupational exposure limits by country.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.213-232
• /
• 2009

This document was prepared to review and summarize the analytical methods for airborne and bulk asbestos. Basic principles, shortcomings and advantages for asbestos analytical instruments using phase contrast microscopy(PCM), polarized light microscopy(PLM), X-ray diffractometer (XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) were reviewed. Both PCM and PLM are principal instrument for airborne and bulk asbestos analysis, respectively. If needed, analytical electron microscopy is employed to confirm asbestos identification. PCM is used originally for workplace airborne asbestos fiber and its application has been expanded to measure airborne fiber. Shortcoming of PCM is that it cannot differentiate true asbestos from non asbestos fiber form and its low resolution limit ($0.2{\sim}0.25{\mu}m$). The measurement of airborne asbestos fiber can be performed by EPA's Asbestos Hazard Emergency Response Act (AHERA) method, World Health Organization (WHO) method, International Standard Organization (ISO) 10312 method, Japan's Environmental Asbestos Monitoring method, and Standard method of Indoor Air Quality of Korea. The measurement of airborne asbestos fiber in workplace can be performed by National Institute for Occupational Safety and Health (NIOSH) 7400 method, NIOSH 7402 method, Occupational Safety and Health Administration (OSHA) ID-160 method, UK's Health and Safety Executive(HSE) Methods for the determination of hazardous substances (MDHS) 39/4 method and Korea Occupational Safety and Health Agency (KOSHA) CODE-A-1-2004 method of Korea. To analyze the bulk asbestos, stereo microscope (SM) and PLM is required by EPA -600/R-93/116 method. Most bulk asbestos can be identified by SM and PLM but one limitation of PLM is that it can not see very thin fiber (i.e., < $0.25{\mu}m$). Bulk asbestos analytical methods, including EPA-600/M4-82-020, EPA-600/R-93/116, OSHA ID-191, Laboratory approval program of New York were reviewed. Also, analytical methods for asbestos in soil, dust, water were briefly discussed. Analytical electron microscope, a transmission electron microscope equipped with selected area electron diffraction (SAED) and energy dispersive X-ray analyser(EDXA), has been known to be better to identify asbestiform than scanning electron microscope(SEM). Though there is no standard SEM procedures, SEM is known to be more suitable to analyze long, thin fiber and more cost-effective. Field emission scanning electron microscope (FE-SEM) imaging protocol was developed to identify asbestos fiber. Although many asbestos analytical methods are available, there is no method that can be applied to all type of samples. In order to detect asbestos with confidence, all advantages and disadvantages of each instrument and method for given sample should be considered.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.4
• /
• pp.381-389
• /
• 2009

Confined spaces are inherently dangerous workplace and many fatal and nonfatal accidents have been reported. Even though these accidents occur in various kinds of confined spaces, there has rarely been reported on the health hazard agent, i.e., the types of gases and their concentration ranges. Therefore in this study, we evaluated several toxic and asphyxiating gas concentrations in various confined spaces. We surveyed 57 manholes, 3 sewage treatment plants, 2 yellow radish manufacturing companies and 7 barges to measure the concentrations of oxygen($O_2$), hydrogen sulfide($H_2S$), carbon monoxide(CO), ammonia($NH_3$). Lower Explosion Limits(LEL) and Volatile Organic Compounds (VOCs). Those four types of confined spaces occupies 56% of accidents during last 9 years in Korea. In 57 manholes, the concentration varied according to the types of manholes; rainfall and sewage, and by location; residential and industrial areas. Sewage manhole in industrial area was evaluated as the most hazardous than other types of manhole like rainfall manholes, residential sewage manholes. The highest $H_2S$ concentration and the lowest $O_2$ concentration at sewage manhole in industrial area were 300 ppm, 8.7% respectively. In 3 sewage treatment plants, $H_2S$ and $NH_3$ concentrations were reached up to the 500 ppm and 200 ppm respectively. Two yellow radish manufacturing companies showed the concentrations of 316 ppm, 505.2 ppm, 90 ppm and 15.7% for $H_2S$, CO, VOCs and $O_2$, respectively. Seven barges showed 15.9%~20.9% oxygen concentration. Gas species and concentration ranges varied by the types and location of confined spaces; CO, $H_2S$, $O_2$ could be hazardous in manhole, especially manhole connected to sewage plants. CO, $H_2S$, LEL, $O_2$, $NH_3$ should be controlled in sludge silo and sluge pumping confined spaces in sewage treatment plant. The activity of lifting out radish from the storage tank was evaluated more hazardous rather than the other activities in yellow radish manufacturing industry. The employers must conduct the survey to identify all possible confined spaces in their local workplace prior to performing the tasks. At the national level to reduce the accidents in the confined spaces, we suggest that systemic approach and active education program including possible hazards, standard operation procedures, ventilation plan, and personal protective equipment in confined spaces should be implemented.

• Tuberculosis and Respiratory Diseases
• /
• v.39 no.6
• /
• pp.490-501
• /
• 1992

Background: Isocyanate is the most significant cause of occupational asthma in this country. The mechanism of isocyanate induced bronchoconstriction is unclear. Subjects and Method: To observe its immunologic and clinical findings, we performed methacholine bronchial challenge test (MBCT), toluene diisocyanate (TDI)-bronchoprovocation test (BPT) and RAST to TDI-, diphenylmethane diisocyanate (MDI)-, and hexamethylene diisocyanate (HDI)-human serum albumin (HSA) conjugate in 22 isocyanate-sensitive asthmatic workers. Results: BPT revealed early (11), dual (5), and late only (6) asthmatic responses. Their latent period ranged from 3 to 120 months (mean:45.9 months). Three cases (13.6%)showed a negative response on initial MBCT, but following MBeT performed 24 hours after TDI-BPT revealed the development of airway hyperresponsivenss. Twelve (54.5%) workers had increased specific IgE to TDI-HSA, seven (31.8%) had to MDI-HSA, and nine (40.9%) had to HDI-HSA conjugate. The prevalence of specific IgE was not associated with latent period, type of asthmatic responses, smoking, and atopic status. After 3 months' avoidance from workplace, airway hyperresponsiveness was improved in 10 (38.3%), among 12 followed cases. Conclusion: It is suggested that isocyanate can induce IgE-mediated bronchoconstriction in 59.1% of isocyanate-sensitive asthmatic workers. Isocyanate-induced asthma can occur even though MBeT showed a negative result, and measurement of the changes of airway hyperresponsivenss after isocyanate-BPT could be helpful to diagnose isocyanate-sensitive asthma.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.170-178
• /
• 2000

Most of manufacturers try to produce the most efficient filter for respirators with the lowest breathing resistance. Filter performance depends on low penetration, i.e., high efficiency (%), and low pressure drop ($mmH_2O$). This study was performed to evaluate performance of respirator filters by quality factor ($q_F$) and suggest the direction for improvement of respirator filters of good quality in Korea. Two mechanical filters, S and K made in Korea, three filtering facepieces, S made in China, C made in Korea and M made in USA, which were widely used in the workplace, were selected and tested efficiency and pressure drop in accordance with flow rate, using with Automated Filter Tester Model 8110 (TSI, USA). The best quality factor within the same respirator filter categories was $0.0672cm^{-1}\;H_2O$ for mechanical filter S, $0.0698cm^{-1}\;H_2O$ for filtering facepiece M at flow rate of 32Lpm. Mechanical filter S would be the best suitable during heavy work since qulity factors decrease less sharply than any others as increased flow rates. It was necessary for mechanical filter S to lower pressure drop without increasing efficiency, but mechanical filter K should be increased efficiency and decreased pressure drop. While filtering facepiece M had the best quality performance of three ones, Sand C should get much higher efficiency and lower pressure for better performance.

• Journal of the Korean Society for information Management
• /
• v.29 no.3
• /
• pp.99-122
• /
• 2012

This study analyzed scientists information behaviors when they engage in solving specific research problems in various situations throughout the entire scientific R&D lifecycle process. In-depth interviews with a total of 24 scientists were conducted in their research laboratories, the scientists' everyday workplace and the contexts of scientific research. The theoretical and methodological frameworks employed for this study were Dervin's Sense-making, Savolainen's Everyday Life Information Seeking, and Engestrom's Activity Theory. The findings of this study informed context-specific research and information behaviors of the scientists in the 14 sub stages of the five-stage of R&D lifecycle. Specifically, the study revealed the research objectives and related information behaviors (e.g., information needs, information seeking, information sources and channels, information barriers, etc.) to achieve the objectives at each sub-stage. The study results provided essential information to re-design the information services and strategies that accommodate the scientific R&D lifecycle.

• Tuberculosis and Respiratory Diseases
• /
• v.62 no.3
• /
• pp.223-226
• /
• 2007

Tetrafluoroethylene is a colorless gas that can be used to synthesize a variety of fluoride compounds by polymerization (e.g., Teflon). Fluoride compounds have many applications in industry. There are several reports of inhalation injury from the pyrolytic product of fluoride compounds. When the polymer is heated under the conditions of inadequate ventilation, the fumes can cause polymer fume fever or pulmonary edema which manifested as symptoms such as fever, chill, profuse sweating, cough and dyspnea. However there are no reports of a direct lung injury caused by tetrafluoroethylene. We report a case of a 27-year-old male presented with acute lung injury after inhaling concentrated tetrafluoroethylene. He complained of cough and dyspnea after the accidental inhalation of tetrfluoroethylene at his workplace. The symptoms improved without any complications after conservative treatment with oxygen and steroid.

• Korean Journal of Occupational Health Nursing
• /
• v.19 no.2
• /
• pp.159-169
• /
• 2010

Purpose: This is a descriptive study to provide basic material that enables to prevent industrial hospital nurses from occupational stress, health problems and work impairment by understanding their work environment, stress, Presenteeism and correlation among them. Method: The subjects for this study consists of 272 industrial hospital nurses who have attended the training conducted by KAOHN from October to December 2009 and recognized the purpose of this study and agreed to participate. The questionnaire included Korean Version of Occupational Stress questionnaire developed by S.J. Chang and Stanford Presenteeism Scale questionnaire translated by Y.M. Lee. The data were analyzed using descriptive statistics, t-test, ANOVA, Scheff$\acute{e}$ test and Pearson's correlation coefficient with SPSS/WIN 17.0. Result: The industrial hospital nurses get much more stress than the average in three fields of occupational stress: interpersonal conflict, job insecurity and occupational climate. The study shows in particular, the age group of twenties with one to three year work experience having higher than any other groups in occupational stress, work impairment and perceived productivity of Presenteeism. Conclusion: It is necessary to develop management for these groups of nurses. In addition, institutional support and policy should be rendered to secure job conditions so that occupational stress can be relieved from these nurses and to prevent work impairment in advance as occupational stress has substantial correlation with health problems, work impairment and perceived productivity of Presenteeism.