• 한국지진공학회논문집
• /
• 제15권3호
• /
• pp.1-9
• /
• 2011

자기부상열차가 중 저속 및 초고속 주행 시 차량의 주행특성 및 교량의 동적 응답 결과를 제시하고자 한다. 수직 자유도 및 회전 자유도를 포함한 10자유도 자기부상열차에 대한 운동방정식을 유도하고, 모드 중첩법을 이용하여 교량의 운동방정식을 구성하였다. 또한 제어 방법으로 UTM01제어기법을 적용하여 수치해석을 수행하였다. 해석 예제로 노면조도, 가이드웨이의 처짐비, 차량 속도 등이 교량의 처짐과 차량의 부상공극 및 여러 가지 변수에 미치는 영향을 파악하였다. 부상공극은 조도의 조건에 따라 그 차이가 확연히 드러나고 또한 자기부상열차의 속도가 증가함에 따라 부상공극이 증가함을 알 수 있었다. 그리고 자기부상열차가 중, 저속 주행 시에는 교량에 대한 영향이 미비하지만 초고속 주행 시 교량에 대한 동적확대계수가 큰 값을 보여주었다.

• 한국철도학회논문집
• /
• 제13권3호
• /
• pp.245-250
• /
• 2010

본 논문에서는 안정성과 안전성 해석을 통하여 차세대 고속철도(HEMU-400X)의 주행성능을 예측하였다. 차량의 설계단계에서 주행성능을 예측하는 것은 차량의 안전 확보를 위해 매우 중요하다. 안정성 해석을 통하여 차륜의 등가 답면구배에 따른 임계속도를 계산하였다. 임계속도는 UIC518에 근거하여 등가 답면구배 0.15에서 400km/h가 달성 가능함을 보였다. 또한 안전성 해석을 통하여, 동역학 모델의 횡방향과 수직방향의 가속도 값을 시뮬레이션 하였다. 안정성 해석은 UIC518에 근거하여 440km/h의 속도로 30km의 구간을 주행하였다. 그리고 계산된 값들은 모두 UIC518의 최대 허용 가속도 값보다 적게 나타나는 것을 확인하였다.

• 산업경영시스템학회지
• /
• 제24권65호
• /
• pp.51-63
• /
• 2001

The present experiment investigated the possibility of evaluating of the human sensibility contingent on the speed and modes of driving using the responses from the autonomic nervous system, subjective assessments, Simulator Sickness (55) in dynamic simulator. The three conditions of the speed of driving were 40 $\pm$ 10 km/h, 100$\pm$10 km/h, 160 $\pm$ 10 km/h, and the participant was instructed to drive the car for three minutes on the elliptical track. It is programed in such a way that the modes of driving can be changed smoothly using road DB in Dynamic Simulator, and for signifying the change of the condition the road signs were used. The instruction was given to the participant to drive the car on the fixed speed of 20 km/h for 30 seconds, then to drive the car on sudden-start mode of driving from the 20 km/h to 160 km/h within 10 seconds. For the sudden-stop mode of driving, it was instructed that stop the car from the speed of 160km/h to 20km/h within 10 seconds when the subject see the road sign, then drive the car at the fixed speed of 20 km/h for 30 seconds. The results of the subjcetive assessment showed that the level of pleasantness and the tension was increased, and physiological response showed that the level of activity of the autonomic responses were also increased as the speed of the car increased. Also, for results on the driving modes showed that the level of pleasantness was highest for the sudden-stop, next highest was sudden-start, and the lowest was 20 km/h fixed speed condition for the subjective assessment, and tile order of the level of activation of the autonomic nervous system showed the same results as above. From the results of the present study it was concluded that the presentation and evaluation of the stimulus for the human sensitivity is possible in dynamic simulator.

• 한국소음진동공학회논문집
• /
• 제11권8호
• /
• pp.374-383
• /
• 2001

A reciprocating compressor unit with variable rotating speed driven by BLDC motor is mounted Inside hermetic chamber on an internal suspension composed of 4 roil springs and a discharge pipe. A method for predicting the dynamic behavior of compressor body is required for a reduction of transmitted vibrations. The mechanical characteristics of spring and discharge pipe stiffness properties have been obtained from experimental tests and mass moment of inertia of the compressor body iron CAD. To confirm the vibration model for the compressor body, free vibration analyses are performed with theoretical and experimental methods. results for analytical investigations on the dynamic behavior of the compressor body and the transmitted forces to the hermetic chamber through the suspension elements are Presented.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.160-166
• /
• 2005

In this paper, the combined system equation of motion, which can analyze the dynamic interaction between pantograph and catenary system, is derived by adopting absolute nodal coordinates and rigid body coordinates. The analysis results are compared with real experiment data from test running of Korean high-speed train (HSR 350x). In addition, a computation method for the dynamic stress of contact wire is presented using the derived system equation of motion. This method might be good example and significant in that the structural and multibody dynamics model can be unified into one numerical system.

• 한국철도학회논문집
• /
• 제5권1호
• /
• pp.10-17
• /
• 2002

In this study, we have developed the static and dynamic simulation program of a high speed current collection system. The catenary wire is modeled to discrete masses connected by massless strings and the pantograph is replaced with 3 d.o.f equivalent models that are composed of masses, springs and dampers. We derived partial differential equations of motion from the equivalent model and developed the simulation program. Then, we calculated the static equilibrium state of the overhead catenary and the dynamic behaviors of the high speed current collection system. The analysis results were compared with the results of GASENDO software developed at RTRI in Japan.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.494-499
• /
• 2003

This paper concerns the static, dynamic and thermal characteristics analysis of a high-speed spindle system for horizontal machining centers with 45mm x50,000rpm. The spindle system is designed based on the angular contact ceramic ball bearings, built-in motor, oil-air lubrication method and oil jacket cooling method. The structural and thermal analysis models of spindle system are constructed by the finite element method. The static and dynamic characteristics are estimated based on the static deformation, modal parameter, mode shape and frequency response function, and the thermal characteristics are estimated based on the temperature rise, temperature distribution and thermal deformation. The analysis results illustrate that the designed spindle system has excellent structural and thermal stabilities

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.362-367
• /
• 2001

A reciprocating compressor unit with variable rotating speed driven by BLDC motor is mounted inside hermetic chamber on an internal suspension composed of 4 coil springs and a discharge pipe. A method for predicting the dynamic behavior of compressor frame is required to reduce the transmitted vibration level. Mechanical characteristics such as mass, spring and discharge pipe stiffness properties are obtained with experimentation. To confirm the vibration model for compressor frame, free vibration analyses are performed with theoretical and experimental methods. Results for analytical and experimental investigations on dynamic behavior of the compressor frame are presented, and the agreement between measured and predicted results are satisfactory.

• 전자공학회논문지B
• /
• 제31B권10호
• /
• pp.44-52
• /
• 1994

In this paper, we assume that the dynamics of DC motor and nonlinear load are unknown. We propose an inverse dynamic model of DC motor and nonlinear load using the artificial neural network and construck speed control system based on the proposed dynamic model. We also propose another dynamic model with speed prediction scheme using the artificial neural network that removes the undesirable time delay effect caused by the computation time during the real-time control. We suggest a dynamic model which has arbitrary number of speed arguments and is especially effective when the motor and load has large moment of inertia. Next, we suggest a controller that combine the neurocontrol and PID control with constant gain. We show that the proposed neurocontrol systems have capabilities of noise rejection and generalization to have good velocity tracking through computer simulations and experiments.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(I)
• /
• pp.204-209
• /
• 2003

The railway vehicle is composed of many suspension components, such as 1st springs, 2nd dampers, that have an influence on the dynamic characteristics of high speed train. Also, the wheel/rail shapes and its contact mechanism affect the dynamic behavior of high speed train. but these geometric contact characteristics are nonlinear functions of the wheelset lateral displacement and it do not exact dynamic analysis for high speed train. there is a need to develop a new wheel/rail contact module for dynamic behavior and wheelset model is divided motor box, wheel box and wheel body. This wheel is moved by motor box and constrained by joint. It is almost same a train and its result is more exactly.