• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.121-124
• /
• 2001

Dynamic Source Route(DSR) protocol is a simple and efficient routing protocol designed specially for use of the multi-hop Ad Hoc Network. DSR allows the network to be completely self-organized and self-configured without the need for any existing infrastructure or administration. DSR protocol consists of the two mechanisms of Router discovery and Router Maintenance, works entirely On-demand in all aspects. In this paper, we will present the performance of DSR protocol on the multi-hop wireless Ad Hoc Networks, illustrate it with simulation, and then analysis the algorism of DSR.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1846-1850
• /
• 2005

This paper presents a constrained-based routing (CBR) algorithm called, Dynamic Possible Path per Link (D-PPL) routing algorithm, for MultiProtocol Label Switching (MPLS) networks. In MPLS on-line routing, future traffics are unknown and network resource is limited. Therefore many routing algorithms such as Minimum Hop Algorithm (MHA), Widest Shortest Path (WSP), Dynamic Link Weight (DLW), Minimum Interference Routing Algorithm (MIRA), Profiled-Based Routing (PBR), Possible Path per Link (PPL) and Residual bandwidth integrated - Possible Path per Link (R-PPL) are proposed in order to improve network throughput and reduce rejection probability. MIRA is the first algorithm that introduces interference level avoidance between source-destination node pairs by integrating topology information or address of source-destination node pairs into the routing calculation. From its results, MIRA improves lower rejection probability performance. Nevertheless, MIRA suffer from its high routing complexity which could be considered as NP-Complete problem. In PBR, complexity of on-line routing is reduced comparing to those of MIRA, because link weights are off-line calculated by statistical profile of history traffics. However, because of dynamic of traffic nature, PBR maybe unsuitable for MPLS on-line routing. Also, both PPL and R-PPL routing algorithm we formerly proposed, are algorithms that achieve reduction of interference level among source-destination node pairs, rejection probability and routing complexity. Again, those previously proposed algorithms do not take into account the dynamic nature of traffic load. In fact, future traffics are unknown, but, amount of previous traffic over link can be measured. Therefore, this is the motivation of our proposed algorithm, the D-PPL. The D-PPL algorithm is improved based on the R-PPL routing algorithm by integrating traffic-per-link parameters. The parameters are periodically updated and are dynamically changed depended on current incoming traffic. The D-PPL tries to reserve residual bandwidth to service future request by avoid routing through those high traffic-per-link parameters. We have developed extensive MATLAB simulator to evaluate performance of the D-PPL. From simulation results, the D-PPL improves performance of MPLS on-line routing in terms of rejection probability and total throughput.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.10
• /
• pp.165-173
• /
• 2011

In Mobile Ad-hoc Network(MANET), mobile nodes are operated by limited batteries. Therefore, it is very important to consume the battery power efficiently to prevent termination of the network. In this paper, we propose Energy-aware Dynamic Source Routing(EDSR) which is based on the Dynamic Source Routing(DSR) to increase the packet transmission and lifetime of the network. If the battery power of a node reaches threshold level, then the node gives up the function of relaying to save battery power except as a source and a destination node. While the conventional DSR doesn't consider the battery consumptions of the nodes, EDSR blocks the nodes from relaying whose battery powers are below the threshold level. Simulation results show the proposed EDSR is more efficient in packet transmission and network lifetime through the balanced battery consumption of the mobile nodes.

• The KIPS Transactions:PartC
• /
• v.8C no.4
• /
• pp.459-468
• /
• 2001

실제적인 이동 Ad Hoc 망에서는 단말의 비대칭성이나 무선환경 특성으로 인해 단방향 링크가 존재할 수 있다. 그러나 현재 Zone 라우팅 프로토콜이외의 기존의 이동 Ad Hoc 라우팅 프로토콜은 양방향 링크들만을 지원하도록 구현되어 있다. 따라서 본 논문에서는 가장 대표적인 라우팅 프로토콜인 DSR(Dynamic Source Routing) 프로토콜이 단방향 링크를 포함하는 이동 Ad Hoc 망에서 구동될 수 있도록 동적 소스 라우팅을 이용한 새로운 단방향 라우팅 프로토콜을 제안한다. 단방향 링크 상에서 효율적으로 구동하기 위해서 제안한 단방향 라우팅 프로토콜은 새로운 경로발견 및 경로유지 방법을 사용하였다. 성능평가를 위해서 미국 버클리 대학의 NS-2 시뮬레이터 프로그램에 제안한 내용을 코드로 삽입시켰으며, 성능평가 파라미터를 얻기 위해 카네기멜론 대학에서 제공한 이동 패턴파일과 연결 패턴파일을 조합하여 사용하였다. 성능평가 항목으로 데이터수신율 및 평균경로 설정시간을 고려하였으며, 제안된 3가지 경로설정 방식들에 대해 비교·평가하였다.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.9
• /
• pp.1209-1218
• /
• 2001

In this dissertation, we propose a dynamic source routing protocol supporting asymmetric path for mobile ad hoc networks. At present, the existing dynamic source routing protocol supports only symmetric path for routing. However, in fact, there can exist unidirectional links due to asymmetric property of mobile termenals or current wireless environment. Thus, we implement a mobile ad hoc routing protocol supporting asymmetric routing path, which is fit for more general wireless environment. Especially, the proposed protocol uses an improved multipath maintenance method in order to perform rapid route reconfiguration when route error due to mobility is detected.

• Journal of KIISE:Information Networking
• /
• v.31 no.5
• /
• pp.519-531
• /
• 2004

Ad-hoc networks are temporary wireless systems composed of mobile nodes without any fixed infrastructure. The life time of each node in the ad-hoc network significantly affects the life time of whole ad-hoc network. A node which drained out its battery may incur the partition of whole network in some network topology The life time of each node depends on the battery capacity of each node. Therefore if all mobile nodes in the network live evenly long, the life time of the network will be longer. In this paper, we propose Power-Aware Dynamic Source Routing (PADSR) which selects the best path to make the life time of the network be longer. In PADSR, when a source node finds a path to the destination node, it selects the best path that makes nodes in the network live evenly long. To find the best path, PADSR considers the consumption of transmission energy and residual battery capacity of nodes upon the path. Consequently the network lives longer if we use PADSR.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.6
• /
• pp.736-741
• /
• 2005

The highly popular algorithm to determine routing path for the multi-hopping wireless sensor network is DSR(Dynamic Source Routing), which is one of the Demand-Driven way to makes the route only when there is a request for sending data. However, because DSR attaches the route's record on the sending packet, the bigger number of sensor node is, the heavier packet in DSR becomes. In this paper, we try to propose the new optimal routing path selecting algorithm which does not make the size of packet bigger by using proper routing table even though the number of sensor node increases, and we try to show our algorithm is more stable and reliable because it is based on the cost function considering some network resources of each sensor node such as power consumption, mobility, traffic in network, distance(hop) between source and destination.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.229-231
• /
• 2003

기존에 제시된 ad hoc 라우팅 프로토콜에는 안정성에 대한 부분이 고려되어 있지 않다. 본 논문에서는 기존의 DSR ad hoc 라우팅 프로토콜에 안정성을 접목한 SDSR 라우팅 프로토콜을 제시한다. SDSR은 DSR에 안정성 제공을 위해 abnormal node detector와 neighbor table이라는 것을 추가한다. abnormal node detector는 네트워크 내에 abnormal 노드를 탐지해 네트워크에서 고립시켜 네트워크에 안정성을 제공하고 neighbor table에 있는 priority를 값에 따라 이웃 노드에서 들어온 패킷을 처리함으로써 효율적인 처리 능력을 제공한다. 본 논문에서는 abnormal node detector와 neighbor table을 통해 어떤 방식으로 네트워크에 안정성을 제공하는지 살펴보도록 하겠다.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.111-120
• /
• 2005

A mobile ad-hoc network is an autonomous system of mobile nodes which are free to move around randomly and organize themselves arbitrarily, hence a routing protocol that handles the dynamic network topology changes is required for the network. In this paper we present a multi -Path on-demand routing protocol called R-DSR (Robust Dynamic Source Routing), an extension to the existing IETF protocol DSR. The proposed protocol has it that every pair of 2-hop away nodes on the single route is additionally connected via an alternative node. Throughout mathematical analysis we show the proposed protocol reveals higher message delivery rate than that of the Das's multi-path protocol, currently known as one of the most typical approaches related to DSR.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.59-66
• /
• 2001

In this paper, we propose a dynamic source routing protocol supporting asymmetric paths for mobile Ad Hoc networks that contain unidirectional links. At present, the existing dynamic source routing protocol supports only symmetric paths that consist of bidirectional links for routing. However, in fact, there can exist unidirectional links due to asymmetric property of mobile terminals or current wireless environment. Thus, we implement a mobile Ad Hoc routing protocol supporting unidirectional links, which is fit for more general wireless environment. Especially, the proposed protocol uses an improved multipath maintenance method in order to perform rapid route reconfiguration when route error due to mobility is detected. For performance evaluation, we consider the following factors: average route discovery time and average data reception rate. In order to obtain the factors of the performance evaluation, we did simulation for 900 seconds in the step of 100 seconds with the following scenarios: usage of route cache in intermediate nodes on route path, and different mobility/connection patterns.