• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.270-273
• /
• 1999

Circular dynamic stereo has special advantages as it enables a 3-D measurement using a single TV camera and also enables a high accurate measurement without a cumbersome calibration. Annular particle streaks are recorded using this system and the size of annular streaks directly concerns to the depth from TV camera. That is, the size of annular streaks is inversely proportional to the depth from the TV camera and the depth can be measured automatically by image processing technique. Overlapped streaks can be processed also by our method. The flow measurement in a water tank is one of the applications of our system. Tracer particles are introduced into the water in a flow measurement. Since the tracer particles flow with water, three-dimensional velocity distributions in the water tank can be obtained by measuring the all movement of tracer particles. Experimental results demonstrate the feasibility of our method.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.122-123
• /
• 2006

Tin oxide nanoparticles (n-SnO and $n-SnO_2$) were synthesized by the inert gas condensation (IGC) method under dynamic gas flow of oxygen and argon at various conditions. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) method were used to analysis the size, shape and crystal structure of the produced powders. The synthesized particles were mostly amorphous and their size increased with increasing the partial pressure of oxygen in the processing chamber. The particles also became broader in size when higher oxygen pressures were applied. Low temperature annealing at $320^{\circ}C$ in air resulted to crystallization of the amorphous n-SnO particles to $SnO_2$.

• 천문학회보
• /
• 제46권2호
• /
• pp.48.3-49
• /
• 2021

We study the process of panspermia in Milky Way-like galaxies by modeling the probability of successful travel of organic compounds between stars harboring potentially habitable planets. To this end, we apply the modified habitability recipe of Gobat & Hong (2016) to a model galaxy from the MUGS suite of zoom-in cosmological simulations. We find that, unlike habitability, which only occupies narrow dynamic range over the entire galaxy, the panspermia probability can vary be orders of magnitude between the inner (R, b = 1~4 kpc) and outer disk. However, only a small fraction of star particles have very large values of panspermia probability and, consequently, the fraction of star particles where the panspermia process is more effective than prebiotic evolution is much lower than from naïve expectations based on the ratio between panspermia probability and natural habitability. The lunar surface progressively darkens and reddens as a result of sputtering from solar wind particles and bombardment of micrometeoroids. The extent of exposure to these space weathering agents is frequently calculated as the location in a diagram of reflectance at 750 nm

• 청정기술
• /
• 제18권4호
• /
• pp.331-340
• /
• 2012

최근 콜로이드 산업에서 기능성 입자의 수요가 증가함에 따라 입자의 제조방법은 상당한 발전을 이루었다. 이러한 발전은 동적/정적 미세유체 시스템을 도입함으로써 이루어졌으며 입자의 크기, 형태, 다공성, 표면의 거칠기 또는 기능성 등 물리적, 화학적인 형상제어를 가능하게 해주었다. 이러한 형상제어를 통하여 만들어진 기능성 입자는 의료진단, 광소자, 바이오산업으로 응용될 수 있다. 뿐만 아니라, 기능성 콜로이드 입자의 자가조립을 유도함으로써 규칙적인 정렬부터 불규칙적인 새로운 형태의 기능성을 갖는 물질을 얻을 수 있고, 자연계에서 일어나는 현상을 모사함으로써 본질적인 연구도 가능하게 해주었다. 그리하여 본 총설에서는 최근 각광받고 있는 기능성 콜로이드 입자의 제조방법에 대해 설명하고 이의 응용 가능성을 소개하였다.

• Smart Structures and Systems
• /
• 제5권5호
• /
• pp.517-529
• /
• 2009

This paper presents the development of a new Adaptive Tuned Dynamic Vibration Absorber (ATDVA) working with magnetorheological elastomers (MREs). The MRE materials were fabricated by mixing carbonyl iron particles with silicone rubber and cured under a strong magnetic field. An ATDVA prototype using MRE as an adaptable spring was designed and manufactured. The MRE ATDVA worked in a shear mode and the magnetic field was generated by a magnetic circuit and controlled through a DC power supply. The dynamic performances or the system transmissibility at various magnetic fields of the absorber were measured by using a vibration testing system. Experimental results indicated that this absorber can change its natural frequency from 35Hz to 90Hz, 150% of its basic natural frequency. A real time control logic is proposed to evaluate the control effect. The simulation results indicate that the control effect of MRE ATDVA can be improved significantly.

• Computers and Concrete
• /
• 제20권3호
• /
• pp.297-310
• /
• 2017

A CFD software was used to simulate free surface flow of SCC in the T-Box test. In total, seven simulations were developed to study the effect of rheological parameters on the non-restricted flow performance of SCC in both horizontal and vertical directions. Different suspending fluids having five plastic viscosity values between 10 and 50 Pa.s, three yield stress values between 14 and 75 Pa, one density of $2500kg/m^3$, and one shear elasticity modulus of 100 Pa were considered for suspension of 178 spherical particles of 20-mm diameter and $2500kg/m^3$ density. The results of the simulations are found to correlate well to changes in rheological parameters of the suspending fluid. Plastic viscosity was shown to be the most dominant parameter affecting flowability and dynamic stability compared to the yield stress. A new approach was proposed to evaluate performability of SCC based on a trade-off between flowability and dynamic stability.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.609-610
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.197-198
• /
• 2007

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.25-31
• /
• 2015

PURPOSES: Implementation and verification of the simple linear cohesive viscoelastic contact model that can be used to simulate dynamic behavior of sticky aggregates. METHODS: The differential equations were derived and the initial conditions were determined to simulate a free falling ball with a sticky surface from a ground. To describe this behavior, a combination of linear contact model and a cohesive contact model was used. The general solution for the differential equation was used to verify the implemented linear cohesive viscoelastic API model in the DEM. Sensitivity analysis was also performed using the derived analytical solutions for several combinations of damping coefficients and cohesive coefficients. RESULTS : The numerical solution obtained using the DEM showed good agreement with the analytical solution for two extreme conditions. It was observed that the linear cohesive model can be successfully implemented with a linear spring in the DEM API for dynamic analysis of the aggregates. CONCLUSIONS: It can be concluded that the derived closed form solutions are applicable for the analysis of the rebounding behavior of sticky particles, and for verification of the implemented API model in the DEM. The assumption of underdamped condition for the viscous behavior of the particles seems to be reasonable. Several factors have to be additionally identified in order to develop an enhanced contact model for an asphalt mixture.

• 한국대기환경학회지
• /
• 제26권2호
• /
• pp.202-218
• /
• 2010

It is well known that the atmospheric inorganic aerosol has the hysteresis phenomena depending on the history of relative humidity. However, the current computational researches have assumed that the physical/chemical state of atmospheric aerosol is only determined by a branch of hysteresis, efflorescence or deliquescence. In this work, we applied the MATLAB-based UHAEROm thermodynamics module to simulate the dynamic interaction between gaseous species $NH_3$ and $HNO_3$, and the two mono-disperse particulate populations in the course of efflorescence and deliquescence, respectively. We conducted the 10 case studies considering the particulate phase with the atmospherically prevailing chemical composition and found that the final states of the particles are determined through the qualitatively five different trajectories by the dynamic interaction between gaseous and two different kinds of particulates. As a result, we show that the coexistence of meta-stable and stable particles drives the different physical/chemical destination comparing with the ones generated from the solitary efflorescence or deliquescence branch.