• The Korean Journal of Nuclear Medicine
• /
• 제32권1호
• /
• pp.10-19
• /
• 1998

The SPECT radiopharmaceuticals labeled with I-123 for dopamine transporter imaging have been used to measure dopamine transporters in patients with movement disorders. However, a cyclotron produced I-123 limits its availiability and ease of use as a radioisotope to be labeled with pharmaceuticals in routine clinical diagnostic procedures. Recently, new radiophannaceuticals for Tc-99m which has optimal characteristic for SPECT imaging have been developed to overcome the limits of using I-123. The purpose of this study was to compare the quality of [Tc-99m]TRODAT-1 with [I-123]IPT SPECT data and then to evaluate the usefulness of [Tc-99m]TRODAT-1 SPECT by using three noninvasive simplified quantitative methods. TRODAT-1 labeled with Tc-99m($15.93{\pm}0.82mCi$) and IPT labeled with I-123($6.60{\pm}0.11mCi$) were injected into five normal controls. Dynamic [Tc-99m]TRODAT-1 SPECT scans of brain were performed for 10 minutes each over 180 minnutes, and for 20 minutes at 4 hrs and 5 hrs. [I-123]IPT SPECT scans were performed for 5 minutes each over 120 minutes. Time activity curves were generated for the left basal ganglia(LBG), right basal ganglia(RBG), and occipital cortex(OCC). Dopamine transporter parameters were ohtained using (BG-OCC)/OCC, graphical method($R_V$), and area ratio method($R_A$). TRODAT-1 and IPT SPECT imaging showed high uptake at the level of the basal ganglia. (BG-OCC)/OCC ratios for TRODAT-1 and IPT were $0.80{\pm}0.14$, and $3.22{\pm}0.81$, $R_Vs$ were $0.62{\pm}0.12$, and $2.30{\pm}0.35$, and $R_As$ were $0.37{\pm}0.08$ and $1.73{\pm}0.31$, respectively. In conclusion, further improvement of [Tc-99m]TRODAT-1 imaging characteristics may be required to estimate the dopamine transporter concentrations in human brains although it shows clear BG localization.

• Science of Emotion and Sensibility
• /
• 제13권4호
• /
• pp.659-668
• /
• 2010

This paper examines users' emotion from both 2D and 3D web interfaces and finds their differences. First, 77 words representing users' emotion were collected from the previous research papers. Second, a web survey system was developed using these collected words and prepared 3 web interface prototypes to collect users' emotions from different types of web interfaces. Finally, a web survey was conducted and its results were analyzed. The result of the survey showed that there were emotional words that were commonly experienced from either 2D or 3D web interfaces. However, it also showed that there were emotional differences between 2D and 3D web interface; 3D web interfaces provide users with specific emotional experiences because of their own characteristics - depth and dynamic movement. It is believed that the words collected from the survey could be the criteria to evaluate the quality of the 3D web interfaces and encourage the research on users' emotion from 3D interfaces.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• 제11권4호
• /
• pp.408-413
• /
• 2018

In this paper, the particle size, bulk density, friction coefficient and angle of repose were measured for the automatic processing of solar salt, which was classified with 5 levels of moisture content (16.5, 13.2, 8.2, 4.9, 3.7%). Average diameter was 1.98~1.60mm according to moisture content, and bulk density increased with increasing moisture content. As a result of measuring the coefficient of dynamic friction, the maximum value was shown in the stainless steel plate according to the material, and ABS plate and acrylic plate were lower in the order. Movement occurred at the moisture content of 8.2% or less, and the empty angle of repose was increased and the filling angle of repose was decreased as the moisture content increased.

• Journal of Broadcast Engineering
• /
• 제25권4호
• /
• pp.475-486
• /
• 2020

This paper is a thesis on media art technology for high-tech performances and exhibitions. After creating an interactive stroke in VR, it is projected in real time through a media facade technique. Among our traditional dramas emphasizing linear movements, movements were extracted from the Bongsan mask dance, and the movements of the lines were used in a media art performance called 'Multi-face Convergence'. When motion data enters the virtual space, geometry consisting of faces is created in the VR space. The created strokes can be set with various brush types, and when performing, a stroke with a red fire effect that matches a dynamic movement was used. It was made to be able to harmonize with the dancers performing the Bongsan mask dance. The medium called VR has characteristics that are not suitable for melting into a performance, but in this performance, it has overcome its limitations by using a technique called media façade. We propose the world's first performance technique that combines interactive strokes with traditional dance performances.

• Cartoon and Animation Studies
• /
• 통권48호
• /
• pp.141-172
• /
• 2017

The film (2000) and (2016) are based on different time slips from each other. However, these two films have many common elements that make one illusion-based illusion. In the common elements, the main characters (being and thing) are traversed at different times and directed as a cyclical one. Also, among these, the movement link of the time and space has a commonality that it becomes possible through a medium ( - radio, you, there - pill). As a result, a series of scenes expressed in showed that the scene of produced in 2000 was greatly circulated. The reason why two movies have similar structure is that the basic framework of video media based on time slip is similar. Therefore, the purpose of this study is not to analyze the problem of quoting and borrowing of two films as mentioned in the paper. To add up, the material of video media is manifold which is a dynamic object of potential which is unlimited and opened, and by rearranging one media it can be created by escaping from one territory. Also, it is a study of analysis to contribute to producer or researcher as a time slip video creation reference connecting times based on the manifold arrangement from two films.

• Journal of Technology Innovation
• /
• 제22권3호
• /
• pp.101-133
• /
• 2014

Climate change and low-carbon consumer movement is demanding proper response around the world while rising oil price increases consumers' needs for green car. As a preliminary study to establish an industrial platform for green car and bring out corporate strategies, this article aims to propose an academic research framework by using various methodologies including conceptual/mathematical modeling, system dynamics, and ABM from different angles. First, an analysis framework for the industrial platform was introduced to analyze green car cases, required elements were proposed, and econometrics was applied to build a basic model related to green platform (two-sided market). Also, to analyze from a dynamic perspective, a system dynamics model was applied to green car environment to build a system dynamics analysis model that is applicable to particular green car industry analysis. Lastly, an agent based model was used to study the way to activate the hybrid car market in Korea from individual consumers' perspective. Based on the result, vehicle policies that are either being enforced or planned to be enforced in the Korean HEV market can be analyzed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제37권11호
• /
• pp.1349-1354
• /
• 2013

Sealing structure to prevent flowing hot gas into the driving device, located between the driving shaft and the liner of On-Off valve for controlling the hot gas flow path was studied. Wear occurs due to the constant movement of the driving shaft controlled by actuator on graphite as the sealing material. In this paper, the dynamic wear behavior in high temperature of graphite(HK-6) to be used as sealing material was evaluated. Reciprocating wear test was carried out for the graphite(HK-6) to the relative motion between shaft materials(W-25Re). The results of friction coefficient and specific wear rate according to contact load, sliding speed at room temperature and $485^{\circ}C$ considering the actual operating environment were evaluated. Through the SEM analysis of the worn surface, third body as lubricant films were observed and lubricant effect of third body was considered.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제15권4호
• /
• pp.107-115
• /
• 2011

In this study, the vibration analysis of the underground box structures induced train movement is studied. In order to perform these analysis, dynamic data, which was measured when subway is in service, are gained by attaching accelerometers on the structure such as lower beam, lateral wall and upper slab. Also, accelerometers are attached on the lower beams and side walls of the gravel ballast and concrete ballast sections in order to compare vibration due to ballast materials. The vibration results of upper slabs and lower beams reveal that the vibration on the upper slabs is greater than the lower beams. Also, the results of the crack gauge on the upper slab show that crack width dose not change due to vibration, These means that the effect of the vibration on the structure is very limited. In order to evaluate the vibration of the structure, acceleration unit is converted to velocity unit comparing with the existing velocity data gained from the platforms.

• Journal of Christian Education in Korea
• /
• 제62권
• /
• pp.101-133
• /
• 2020

This study is an attempt to grasp the fundamental characteristics and core structures of Bibliodrama, which has recently received a lot of attention in various fields including Christian education. Bibliodrama is a guided form of process-oriented staging of biblical texts in groups with the aim of mutually opening up the text and the biography of the participants in the implementation of holistic encounters (H. Aldebert). In the background of the birth of Bibliodrama can be found the hermeneutical efforts of the biblical scholar Walter Wink who sentenced the bankruptcy of historical criticism. He laid the biblical interpretative foundation for Bibliodrama which combines Bible and body. German theologian Gerhard Marcel Martin had a new experience of seeing the Bible through body activity during his life in New York, and based on that experience he began to work on the Bibliodrama. And the New Testament scholar Tim Schramm, who focused on the TCI (themecentered interaction) movement, found the optimal methodology to embody the interaction of biblical studies in Bibliodrama. On the other hand, Peter Pitzele, who wanted to realize the Bibliodrama in the tradition of Midrash, has developed a new type of Bibliodrama (Bibliolog) that is different from the European Bibliodrama. When we put together the positions of the pioneers of Bibliodrama, it turns out that it has three fundamental characteristics: body, interaction, and the empty space of the Bible. The body refers to the personality of learners participating in the Bibliodrama. They are not passive participants, but voluntary and active participants. Interaction is realized through the dramatic way of Bibliodrama. Bibliodrama aims for a dynamic process in which hermeneutical interaction occurs. The empty space of the Bible, which Bibliodrama pays attention to, allows us to understand why the Bible is not a fixed word but a living word that is still heard today. In order to understand the Bible as the content of education, Bibliodrama liberates the text that is fixed in a literal way and gives life by paying attention to the empty space of the Bible and reading it slowly.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제14권4호
• /
• pp.269-275
• /
• 1981

The fishing hooks were tested for breaking and unbending due to plastic deformation of the material. Study of tensile test is not complicated, but has not even worked out fully enough, especially when the test specimen is subjected to plastic deformation. The fishing hook is subjected to unbending stress and the critical section is a Point which is furthest from the line of action of the forces. The dynamic force of fish during jerks depends on their speed of movement and body weight, the kinetic energy corresponding to it and also on the rlastic displacement of the rigging which absorb the energy. Six kinds of hook were tested by the dynamometer under tensile speed 290mm/min (subscript s) and 780mm/min (subscript f). According to their results, the breaking load(B: kg) can be induced with the formula $B={\alpha}wd^2+\beta$ where w(mm) is the distance between the barb base and the lower shank and d(mm) is diameter. The coefficients of the formula for the round hooks(R) and the angular hooks(A) are approximately as follows: $$R:\;\alpha_{s}=0.5,\;\beta_{s}=1.6,\;\alpha_{f}=0.4,\;\beta_{f}=1.4$$ $$A:\;\alpha_{s}=1.1,\;\beta_{s}=2.0,\;\alpha_{f}=1.0,\;\beta_{f}=0.9$$ The ratio of $B_{f}\;to\;B_{s}$ is corresponding to 0.8. The ratio of deformation(X) that is moved distance of barb base at break to the distance(H) between head base and barb base is about $50\%$. Further study should be carried out on the subject of impact and fatigue test under the same condition which is exerted force by the hooked fish.